• 한국정밀공학회지
• /
• 제18권8호
• /
• pp.129-138
• /
• 2001

The paper presents an implementation procedure of assembly line for ABS motor, which is composed of four subassemblies-yoke, grommet, housing and armature. The characteristics of ABS motor and its assembly processes are analysed, and the automation possibility of each process is examined in order to decrease assembly time. The assembly machines and facilities are then selected for automatic assembly, and the layout of the selected facilities is determined. Finally, task allocation of each worker is achieved by assembly line balancing to increase assembly productivity and efficiency. The line efficiency is also analyzed using simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.52-54
• /
• 1997

This paper deals with investigating some characteristics of the inverter-driven tractive induction motor according to the various rotor slot number. 2-D time-stepped finite element method considering the inverter voltage waveform is utilized for electromagnetic field analysis. As a result, harmonics spectra of torque and bar loss are compared in each case.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.73-75
• /
• 1998

Electromagnetic forces as a source of vibration and noise are analyzed and compared for an induction motor with different rotor slot number each other which drive high speed trains. Time stepped finite element method is used to analyze electromagnetic field considering the voltage harmonics supplied from a inverter. As a result, a rotor slot number is determined to reduce the harmonics of electromagnetic forces.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• 제5B권2호
• /
• pp.154-161
• /
• 2005

In the machine tool industry, direct drive linear motor technology is an interesting means to achieve high acceleration, and to increase reliability. This paper analyzes and compares the characteristics of a tubular linear motor with Halbach and radial magnet array, respectively. First, the governing equations are established analytically in terms of the magnetic vector potential and two dimensional cylindrical coordinate systems. Then, we derive magnetic field solutions due to the PMs and the currents. Motor thrust, flux linkage and back emf are also derived. The results are shown to be in good conformity with those obtained from the commonly used finite element method. Finally, control parameters are obtained from analytical solutions.

• 조명전기설비학회논문지
• /
• 제26권2호
• /
• pp.18-26
• /
• 2012

Though electricity consumption amount in industry has been increased gradually, corresponding power supply show symptoms of marginal point. Importance of demand-side management from large-industries has also been raised. This paper deals with induction motor, which is one of representative examples of heavy electricity consumption utilities, to analyze potential technical capability, economic feasibility from consumers' viewpoint and demand-side management feasibility from nation-wide perspective. Nation-wide economic feasibility analysis was done through California test, which has been used as demand-side management evaluation model. This paper also describes limitation of existing high efficiency induction motor in terms of contribution to demand-side management and utilizes premium motor to calculate demand-side management contribution level and economic feasibility evaluation. Likewise, this paper emphasizes the efficiency improvement of induction motor and analyzes how much premium motor related technologies can contribute to demand-side management.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1997년도 전력전자학술대회 논문집
• /
• pp.141-147
• /
• 1997

The variable speed drive system of a electric motor is popular in industry due to its economical aspect and simplicity of implementation, comparing with a steam turbine or the other engine driven. For a large pumping load like a feedwater pump rated about or more than 20,000㎾, a synchronous motor could be primarily considered. In this paper, we studied the modelling of a variable speed drive system consisted with a load commutated inverter(LCI) and a brushless sailent pole rotor synchronous motor(SM) using MATLAB/SIMULINK. Simulation was performed with a small SM motor parameters.

• Journal of Advanced Marine Engineering and Technology
• /
• 제27권4호
• /
• pp.503-510
• /
• 2003

A new method of induction motor drive, which requires neither shaft encoder nor speed estimator, is presented. The proposed scheme is based on decreasing current gap between a numerical model and an actual motor. By supplying the identical instantaneous voltage to both model and motor in the direction of reducing the current difference. the rotor approaches to the model speed. that is. reference value. The indirect field orientation algorithm is employed for tracking the model currents. The performance of induction motor drives without speed sensor is generally characteristic of poorness at very low speed. However, in this system, it is possible to obtain good speed response in the extreme low speed range.

• Journal of Power Electronics
• /
• 제8권3호
• /
• pp.268-274
• /
• 2008

This paper presents a proposed position controller for a vector controlled induction motor. The position controller design depends on the rotational motion equations and a classical speed controller (CSC) performance. The CSC is designed to have the ability to track variable reference inputs and to provide a predefined system performance. Standard position controller in industry is presented to analyze its performance and its drawbacks. Then the proposed position controller is designed, based on the well defined rotational motion equations. The proposed position controller and the CSC are applied to control the position and speed of the vector controlled induction motor with different ratings. Simulation results at different operating conditions are presented to evaluate the proposed controllers' performance. The results show that the CSC can drive the motor with a predefined speed performance and can track a variable reference speed with an approximately zero steady state error. The results also show that the proposed position controller has the ability to effect high-precision positioning in a limited time and to track a variable reference position with a zero steady state error.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.2077-2078
• /
• 2011

Now a days, the induction motor is widely used in industry automation. Without monitoring the motor fault, maintenance cost is increased undesirably high. The slip frequency is included in the feature frequency, so rotating rotor speed is needed. In this paper, a sensorless motor speed estimation method, rotor slot harmonic(RSH) method is suggested and a solution of rotor bar diagnosis is proposed for motor running with light-load. When the rotor is rotating, it shows the harmonic signal of back-emf voltage related with number of rotor slot. So from the power spectrum of current signal, we can find the rotor speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.138-140
• /
• 2007

These days, robot-industry development requires a new motor technology. Robot system is more complex than the other machine ones. They need the simplicity and light weight as robot systems. Moreover, They have to become a high energy efficiency machine. For these reasons, in this paper, the 3-degrees of freedom permanent-magnet spherical motor is proposed instead of existing ones. The proposed motor model is analyzed by using FEA(Finite Element Analysis), for comparing the results, torque of the motor is simulated by derived torque function.