• The Transactions of the Korean Institute of Power Electronics
• /
• v.16 no.6
• /
• pp.569-576
• /
• 2011

This paper proposes a new dead time compensation method for a PWM inverter. Recently, PWM inverters are extensively used for industry applications, such as ac motor drives, distributed grid-connected systems and a static synchronous compensator (STATCOM). Nonlinear characteristics of the switch and the inverter dead time cause a current distortion and deterioration of power quality. The dominant harmonics in the output current are the $5^{th}$ and $7^{th}$ harmonics in the stationary frame, and the $6^{th}$ harmonics in the synchronous rotating frame. In this paper, a resonant controller which compensates the $6^{th}$ harmonics in the synchronous rotating frame is proposed. This method does not require any off-line experimental measurements, additional hardware and complicated mathematical computations. Furthermore, the proposed method is easy to implement and does not cause any stability problem.

• International Commerce and Information Review
• /
• v.13 no.4
• /
• pp.151-176
• /
• 2011

Recently, the importance and requirement for Corporate Social Responsibility(CSR) is continuously growing in both korea and foreign countries. This paper tried to analyze on the theoretical trend of CSR and to draw out managemental implications for Korean firms' global CSR strategy by means of comparative case study for the CSR activities of Toyota and Hyundai Motor in China. The results and implications of this study are as follows. First, this study showed that these companies had carried out a systemic legal and ethical responsibility. Second, according to the model of Porter & Kramer and Ibuki Eiko, these companies had recognized the importance of CSR and had recently begun to implement their strategic CSR Third, Toyotas' CSR activities in China are more closely related to auto industry and more strategic in compare with Hyundai Motors' CSR activities in China. Fourth, therefore, the more strategic and long-term planned effective CSR activities of Korean firms in China will be needed in the future.

• 전자공학회논문지 IE
• /
• v.45 no.4
• /
• pp.19-26
• /
• 2008

The purpose of this paper is to build a system applicable to floriculture, hydroponics and vinyl house agriculture by a development of remote control equipments using programmable logic controllers (PLC). Remote factory automation and home automation systems have been developed and used due to the rapid progress in the fields of information and automation; however, the systems are so expensive that their applications have not been feasible in agriculture. So we have developed simple modules for PLC to replace the expensive conventional systems. The developed systems have potentials to be applied to automation systems in agricultural industry. Technologies for motor control, microprocessor, PLC programming and wireless interface are developed and implemented in the form of application modules of our systems, and our system is applicable to the remote form automation of floriculture and hydroponics.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.23 no.1
• /
• pp.65-73
• /
• 2015

The ride quality has become a key component of not only design but car selling as the technology developed and the requirement of passengers grew up. Thus car industry invests lots of time and cost for the higher ride quality. The evaluation of the ride quality mainly is expressed by subjective element that drivers felt. In this paper, instead of the original transfer path analysis method, relatively new methods such as OPAX(Operational path analysis with eXogeneous inputs) and OTPA(operational transfer path analysis) are used for analyzing the main hindrance element of ride quality. With those new method, contribution rate of all paths that the vibration propagate along analyzed after driving test on the roads having different characteristic. The comprehensive hindrance elements of ride quality are deduced from the contribution rate and the improve experiment by changing one of hindrance elements for higher ride quality.

• Journal of Navigation and Port Research
• /
• v.34 no.1
• /
• pp.77-82
• /
• 2010

These days our coasts have been damaged by the polluted water resulting from the construction of industry on the shore, increasing population and urbanization. The destruction of ecosystem has induced many problems to aquaculture such that it raises the production cost of aquatic products for eating. For solving these problems aquafarm has been moving to the land. This paper intends to describe the automatic feeding system for the inland fish farm. An existent automatic feeding system has problems such that feed quantity is not accurate and feed itself is broken by feed motor. But a proposed system in this paper is more accurate than the existent system in view of feed quantity by using the combination of valve and load-sell. Resultantly, the system can safely transfer feed to inland nursery tank. Through several experiments using a real system, the effectiveness of the proposed system is verified under all conditions.

• Journal of Power Electronics
• /
• v.18 no.6
• /
• pp.1729-1750
• /
• 2018

Voltage source inverters (VSIs) are widely used to drive induction motors in industry applications. The quality of output waveforms depends on the switching sequences used in pulse width modulation (PWM). In this work, all existing optimal space vector pulse width modulation (SVPWM) switching strategies are studied. The performance of existing SVPWM switching strategies is optimized to realize a tradeoff between quality of output waveforms and switching losses. This study generalizes the existing optimal switching sequences for total harmonic distortions (THDs) and switching losses for different modulation indexes and reference angles with a parameter called quality factor. This factor provides a common platform in which the THDs and switching losses of different SVPWM techniques can be compared. The optimal spatial distribution of each sequence is derived on the basis of the quality factor to minimize harmonic current distortions and switching losses in a sector; the result is the minimum ripple loss SVPWM (MRSLPWM). By employing the sequences from optimized switching maps, the proposed method can simultaneously reduce THDs and switching losses. Two hybrid SVPWM techniques are proposed to reduce line current distortions and switching losses in motor drives. The proposed hybrid SVPWM strategies are MRSLPWM 30 and MRSLPWM 90. With a low-cost PIC microcontroller (PIC18F452), the proposed hybrid SVPWM techniques and the quality of output waveforms are experimentally validated on a 2 kVA VSI based on a three-phase two-level insulated gate bipolar transistor.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.2
• /
• pp.271-278
• /
• 2021

This paper is a study on the implementation of smart filter system that recognizes the external environment and automatically removes pollutants according to pollution level. Recently, the occurrence of various pollutants in indoor and outdoor space has adversely affected the human body. Especially, various fine dust generated in the atmosphere becomes worse in closed residential space or office space. Although air pollution can be temporary lowered through ventilation, it is difficult to respond to fine dust changes in real time, and such problems become serious in the space where many people reside, such as at home or industry. Therefore, it is necessary to measure the pollution level of fine dust inside the residential space in real time and to reduce the pollution of indoor ventilation through automatic ventilation with the outside. To improve these problems, this paper proposes the implementation of smart filter system for external environment recognition. The structure of smart filter system that automatically measures air quality inside and outside, removes pollutants, implements the function, and confirms the operability by manufacturing prototypes. Finally, the effectiveness of the smart filter system for solving fine dust problems was examined.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.25-33
• /
• 2018

As the IT industry develops, The field of e-learning based on existing theoretical subjects has expanded to fields requiring actual education. Courses that require practical training in e-learning must be evaluated to have learning outcomes through on-line practice. In this research, a student at Cyber University mechatronics engineering studies 'PLC Control' and 'Servo Motor Control', which are subjects of the undergraduate major, through 'Prime College's CyberLAB' for learning by e-learning investigated whether there was a learning result. For this reason, CyberLAB was conducted. And for the students who took the course for two years, We confirmed through the 5 - point scale questionnaire and grades that the practical subjects had a significant effect on e - learning.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.18 no.3
• /
• pp.33-40
• /
• 2019

FDM 3D printers have become widespread, and investment in the 3D printer industry is increasing. Therefore, many 3D printers are released and the functions of products are emphasized. However, to lower unit prices, open-type 3D printers are sold in kit form, and their performance is very low. If the 3D printer has many heat sources and is sealed, there is the possibility that the main accessories (the main board, power supply, and motor) will be damaged by trapped heat. At the same time, if the ambient temperature is low due to the properties of the material, the output quality deteriorates. In this study, we analyzed the temperature rise of the main accessories and the quality of the output by the heat bed when a chamber was added to an open-type 3D printer. We also compared the quality of the output due to the air flow with the temperature rise of the main accessories. Moreover, we found the optimal value. As a result of the quality analysis, it was finally confirmed that the case with the chamber at $95^{\circ}C$ was the best for the printing condition. In addition, in the absence of the chamber, the bending of the specimen was found to be large, and in the case of the chamber, the degree of bending was slightly decreased by 0.05 mm.

• Journal of Digital Convergence
• /
• v.19 no.11
• /
• pp.301-313
• /
• 2021

The automotive industry is facing a paradigm shift, changing from owning to sharing and from manufacturing to service. However, it is hard to conclude that the economic value of smart mobility service is always positive to users. Cost related to owing or share a vehicle is very hard to estimate from the perspective of potential users as well as the benefit of the service. Focusing on the cost side of the story, this study develops a cost estimating model based on three main factors: electrification, advanced driving assistant systems (ADAS) function, and participation of ride-sharing service. As a result of the model analysis, low cost was estimated as a result when receiving cost benefits such as electrification and ride-sharing participation. Various factors were analyzed through sensitivity analysis also. These results can provide useful insights into the cost prediction and strategies for potential users and manufacturers on smart mobility service market.