• 제목/요약/키워드: Motor Unit

검색결과 585건 처리시간 0.024초

DSP를 이용한 인버터 특성분석 시스템 (Analyzable System for Characteristics of Inverter by the using DSP)

  • 박진홍;류희삼;이종규;이성백
    • 조명전기설비학회논문지
    • /
    • 제12권4호
    • /
    • pp.75-80
    • /
    • 1998
  • 본 논문에서는 DSP 장치와 개인용 컴퓨터를 연계한 실시간 인버터 특성 분석 시스템을 제안하였다. 전력 변환 시스템은 제어 대상과 용도에 따라 회로를 셜계한다. 그리고 설계된 전력 변환 시스랩은 입력 조건에 따라 시스템의 제어특성이 평가된다. 따라서 제어방법을 연구하기 위해서는 전력 변환 시스템이 필요하고, 이를 평가하기 위한 관측 시스랩이 필요하다. 제안한 실시간 특성 분석 시스랩을 평가하기 위하여 인버터 시스템을 구성하였다. 그리고 개인용 컴퓨터를 이용하여 입력 제어 조건에 따라 유도전동기를 구동하였다. 이때 얻어지는 인버터 출력 특성 및 제어특성올 다양하게 분석하였다.

  • PDF

무선 LAN 환경에서의 모터 감시 시스템에 관한 연구 (A Study on the Motor Monitoring System in Wireless LAN Environments)

  • 정성훈;정우영;이태오
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국해양정보통신학회 2006년도 춘계종합학술대회
    • /
    • pp.135-138
    • /
    • 2006
  • 각종 현장 및 시설물에는 모터를 이용하여 작업하는 전기실 또는 기계실 등이 많이 있다. 이러한 경우, 모터를 제어하는 배전반의 일종인 모터제어센터(MCC)와 중앙통제실에는 데스크 판넬(desk panel)이 설치되며, 현장마다에는 각각의 로컬 판넬(local panel)이 설치되어 있다. 현재 이러한 구성요소들은 많은 유선으로 연결되어 있으며, 각각의 유니트(unit) 마다 나오는 접점신호의 온(on)/오프(off) 신호가 중앙통제실의 데스크 판넬에 전달되고 있다. 본 논문에서는 무선 LAN 환경에서 모터의 감시 및 제어를 위한 시스템에 관한 연구이다. 즉, 현장에서 근무자의 직접적인 모터의 동작 상태 확인 및 작동을 위한 불편함을 해소하기 위하여, 무선 LAN 환경을 통하여 모터제어센터의 감시 제어를 위한 시스템의 구현이다. 이를 위하여, 모터제어센터와 모터 감시 시스템(컴퓨터) 간의 데이터 전송을 위해서 무선 LAN의 블루투스 통신모듈을 이용한 RF 송 수신기 및 관리자를 위한 감시(모니터링) 프로그램을 구현하였다.

  • PDF

병렬형 하이브리드 자동차의 구동장치 설계 및 해석 (Design and Analysis a Drive-train for a Parallel-type Hybrid Electric Vehicle)

  • 김동현;안성준;최재원
    • 한국정밀공학회지
    • /
    • 제29권7호
    • /
    • pp.770-777
    • /
    • 2012
  • This paper deals with the design and modal characteristics analysis of a drive-train for a paralleltype hybrid electric vehicle (HEV). The function of the drive-train system (DTS) in the HEV combines or divides the torque and velocity from the internal combustion engine along with the induction motor. The system consists of a compound planetary gear and unit's electromagnetic clutch to provide the operation modes such as Engine Only (EO), Electric Vehicle (EV), and Hybrid Electric Vehicle (HEV) modes. In order to investigate the characteristics of the velocity and torque flow for the system, dynamic models of the HEV with DTS are derived from the prototype DTS. The performance of the derived dynamic models is evaluated by both computer simulations and experiments according to each mode.

DDA를 이용한 하드웨어 보간기의 계산효율 향상에 관한 연구 (A study on the improvement of calculation efficiency for the two-axis hardware interpolator using DDA)

  • 오준호;최기봉
    • 대한기계학회논문집
    • /
    • 제12권5호
    • /
    • pp.968-975
    • /
    • 1988
  • 본 연구에서는 직선보간과 원호보간에서 계산효율을 향상시킬 수 있는 방법을 제시하여 이 방법과 가감속 구간을 고려한 하드웨어 보간기를 설계 및 제작하였고, 이 것을 스텝 모터에 의해 구동되는 밀링머시인에 연결하여 보간기의 성능을 알아보았다.

할바 자석배열을 이용한 초소형 정보저장장치의 초점 구동기 설계 (Halbach Array Type Focusing Actuator for Small and Thin Optical Data Storage Device)

  • 이성규;박강호;백문철
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2004년도 추계학술대회논문집
    • /
    • pp.65-69
    • /
    • 2004
  • The small form factor optical data storage devices are developing rapidly nowadays. Since it is designed for portable and compatibility with flash memory, its components such as disk, head, focusing actuator, and spindle motor should be assembled within 5 m thickness. The thickness of focusing actuator is within 2 mm and the total working range is $+/-100{\mu}m$, with the resolution of less than $1{\mu}m$. Since the thickness is limited tightly, it is hard to place the yoke that closes the magnetic circuit and hard to make strong flux density without yoke. Therefore, Halbach array is adopted to increase the magnetic flux of one side without yoke. The proposed Halbach array type focusing actuator has the advantage of thin actuation structure with sacrificing less flux density than conventional magnetic array. The optical head unit is moved on the swing arm type tracking actuator. Focusing coil is attached to swing arm, and Halbach magnet array is positioned at the bottom of deck along the tracking line, and focusing actuator exerts force by the Fleming's left hand rule. The working range and resolution of focusing actuator are analyzed with FEM and experiment.

  • PDF

퍼지논리 안정화알고리즘을 이용한 다중채널 능동소음제어시스템 (Multi-Channel Active Noise Control System Designs using Fuzzy Logic Stabilized Algorithms)

  • 안동준
    • 한국산학기술학회논문지
    • /
    • 제13권8호
    • /
    • pp.3647-3653
    • /
    • 2012
  • 능동 소음제어 시스템에 사용되는 IIR 필터 구조는 구조적으로 안정성이 보장되어야 하며 이는 분모 전달 함수의 근이 단위원 내부에 존재하여야 한다. 따라서 이를 결정하는 제어 필터의 계수의 적절한 조정이 중요해 진다. 본 논문에서는 적응과정에서 불안정할 우려가 있는 IIR 필터 구조를 가지는 Filtered_U LMS 알고리즘에 안정화 알고리즘과 수렴속도 향상을 위한 퍼지논리를 이용한 수렴계수 계산 알고리즘을 제안하였다. 제안한 알고리즘이 FIR 필터 구조 알고리즘보다 계산량이 적고 수렴특성이 우수함을 시뮬레이션을 통하여 보였다.

A Biomechanical Model of Lower Extremity Movement in Seated Foot Operation

  • Kyu-Sung Hwang
    • 산업경영시스템학회지
    • /
    • 제23권60호
    • /
    • pp.37-46
    • /
    • 2000
  • A biomechanical model of lower extremity in seated postures was developed to assess muscular activities of lower extremity involved in a variety of foot pedal operations. The model incorporated four rigid body segments with the twenty-four muscles to represent lower extremity This study deals with quasi-static movement to investigate dynamic movement effect in seated foot operation. It is found that optimization method which has been used for modeling the articulated body segments does not predict the forces generated from biarticular muscles and antagonistic muscles reasonably. So, the revised nonlinear optimization scheme was employed to consider the synergistic effects of biarticular muscles and the antagonistic muscle effects from the stabilization of the joint. For the model validation, three male subjects performed the experiments in which EMG activities of the nine lower extremity muscles were measured. Predicted muscle forces were compared with the corresponding EMG amplitudes and it showed no statistical difference. For the selection of optimal seated posture, a physiological meaningful criterion was developed for muscular load sharing developed. For exertion levels, the transition point of type F motor unit of each muscle is inferred by analyzing the electromyogram at the seated postures. Also, for predetermined seated foot operations exertion levels, the recruitment pattern is identified in the continuous exertion, by analyzing the electromyogram changes due to the accumulated muscle fatigue.

  • PDF

Exploring the Relationship Between International Classification of Functioning, Disability, and Health Items Linked to Clinical Assessments in Children With Cerebral Palsy

  • Park, Sang-Duk;Yi, Sook-Hee;Kim, Jeong-Soo
    • 한국전문물리치료학회지
    • /
    • 제28권4호
    • /
    • pp.245-250
    • /
    • 2021
  • Background: The International Classification of Functioning, Disability, and Health-Child and Youth version (ICF-CY) is designed to record the characteristics of developing children and examine the influence of a child's environment on their health. Objects: This study was designed to determine the relationship between the clinically extracted ICF-CY items and The Pediatric Evaluation of Disability Inventory (PEDI) and Gross Motor Function Measure (GMFM) items. Methods: Thirty patients (17 males and 13 females) who were hospitalized in a pediatric and youth patient unit of a rehabilitation hospital were included in the study. Four health professionals (two physical therapists and two occupational therapists) working independently linked the PEDI and GMFM-66 items to the activity and participation domains of the ICF-CY. Results: There were strong negative correlations between the ICF-CY subdomains and the PEDI subdomains (r = 0.76-0.95; p < 0.05). There were positive strong correlations between the ICF-CY subdomains and the GMFM-66 (r = 0.76-0.95; p < 0.05). Conclusion: The extracted ICF codes were a valid tool for evaluating the mobility and selfcare conditions of cerebral palsy in the pediatric rehabilitation area.

양방향 컨버터의 커패시터 위치에 따른 고장률 분석 (Analysis of failure rate according to capacitor position of bidirectional converter)

  • 김예린;강필순
    • 전기전자학회논문지
    • /
    • 제23권1호
    • /
    • pp.261-265
    • /
    • 2019
  • 기존 양방향 컨버터와 출력 커패시터를 추진용 배터리 쪽으로 이동시킨 양방향 컨버터의 고장률 변화를 분석한다. 두 컨버터의 회로 구조적 동일성과 차이점을 분석하여 커패시터 위치 변경으로 동작전압이 저감됨을 확인한다. 전압스트레스 인자와 동작온도에 따른 커패시터 부품 고장률을 구하고 양방향 컨버터의 고장나무에 적용하여 컨버터 전체 고장률을 구한다. 동작온도와 커패시턴스 값에 따른 고장률과 평균고장시간을 비교 분석하여 설계 변경으로 인한 장 단점을 분석한다.

경막외 뇌척수액 누출과 연관된 양측 상지 근위축증: 증례보고 (Bibrachial Amyotrophy Associated with Epidural Cerebrospinal Fluid Leakage: A Case Report)

  • 노현우;정지선;성덕현
    • 대한근전도전기진단의학회지
    • /
    • 제20권2호
    • /
    • pp.112-118
    • /
    • 2018
  • We describe a case of a 71-year-old male patient who experienced progressive bilateral proximal upper limb weakness and atrophy without sensory symptoms and signs over 5 years. Electromyography demonstrated denervation potentials and neuropathic motor unit action potentials on C5-C7 myotome muscles bilaterally. Cervical spine magnetic resonance imaging revealed engorged anterior epidural venous plexus, T2 hyperintensity localized to grey matter ("snake-eye" appearance) at C2-C6 vertebral level, and ventral epidural fluid collection from C6 to T8 vertebral level. This case indicates that bibrachial amyotrophy associated with epidural fluid leak should be suspected in patients presenting with progressive bilateral upper limb weakness and atrophy without sensory involvement.