• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.145-147
• /
• 1996

Traction Motor is being transferred to the squirrel cage induction motor from D.C motor, by the improved power semiconductors like GTO, IGBT, etc. In the Induction Motor, inverter system must be used for delivering variable voltage variable frequency. But, by pulsating in the system the harmonics would be produced, and that cause the torque ripple and enfeeble the dynamic characteristics of the motor. So, to use the inverter system, we should take the torque ripple into consideration. To minimize the torque ripple in the VSI fed Traction Motor, the optimal pulsating was presented in this paper. By using the SPWM(Sinusoidal Pulse Width Modulation) method, feeding the appropriate pulse, we can minimize the torque ripple and improve the transient response.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.610-614
• /
• 2000

Torque pulsation generated in every commutation period is the main drawback of BLDC motor which deteriorates the precision of BLDC motor. Many methods to solve this problem have been proposed. In this paper a new torque model considered with decaying phase back EMF is introduced and from it the cause of torque pulsation in commutation period is analyzed. Form this analysis new algorithms to reduce the torque pulsation by commutation time are proposed and with simulation the validity is verified.

• 조명전기설비학회논문지
• /
• 제16권5호
• /
• pp.14-21
• /
• 2002

본 논문은 4상과5상 하이브리드형 스텝모터의 모델링, 특성해석 및 디텐트 토크에 대한 고조파 저감을 대상으로 연구하였다. 이를 위하여 기계적인 모델링을 도출하였으며 자계해석을 위해서 퍼미언스법을 이용하였다. 이러한 해석 결과 본 모델에 대한 디텐트 토크를 얻을 수 있었다. 또한 두 모델 구조에 대한 상차의 특성해석 비교를 통하여, 본 모델에 대한 디텐트 토크를 유도해 낼 수 있었다. 이때 5상 스텝모터는 4상 스텝모터에 비하여 디텐트 토크의 감소와 스텝응답이 개선됨을 알 수 있었다. 해석결과 퍼미언스분포의 크기는 평균토크의 발생에 영향을 미치며, 고조파성분의 크기가 토크 리플의 크기를 발생함을 알 수 있었다.

• 한국항행학회논문지
• /
• 제14권5호
• /
• pp.760-766
• /
• 2010

본 논문에서는 유압 비례 제어 밸브로 구동되는 유압모터 부하계에 존재하는 정지마찰토크와 점성마찰토크를 해석하였다. 이에 기초 실험으로 유압시스템의 에너지인 압력과 유량에 대한 특성실험을 수행하였고, 공압브레이크 시스템을 이용하여 브레이크 압력의 변화를 인가하여 마찰토크의 변화를 실험하였다. 비선형마찰과 선형마찰에 대한 해석은 유압 시스템의 마찰특성에 대하여 수행하였다.

• 조명전기설비학회논문지
• /
• 제25권7호
• /
• pp.26-31
• /
• 2011

In this paper, torque characteristics analysis of Synchronous Reluctance Motor with the cylindrical rotor type by winding function theory(WFT) is described. The stator is same as one of the induction motor. From the d-axis, q-axis flux density distribution, to calculate self and mutual inductances needed to calculate the torque of the machine by using winding function theory the new equivalent geometry of rotor was proposed. D-axis, q-axis flux densities, self inductance and torque characteristics were obtained. From the comparison with results of finite element analysis the proposed method was verified.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1455-1458
• /
• 2005

This paper presents the method of reducing torque ripple of Blushless Direct Current(BLDC) motor. In the BLDC motor, the torque is decided by the back-EMF and current waveform. If the back-EMF is constant, the torque ripple depends on the current ripple during commutation period. The current in commutation period is acquired by circuit analysis and then the torque ripple simply can be reduced by varying input voltage to flow the current continuously. And suggested method is confirmed by dynamic with parameters of 500W BLDC motor.

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.113-121
• /
• 2014

This paper presents a optimization design of 10[W] single phase BLDC motor applied Notch shape. Cogging Torque causes noise, vibration and torque ripple so notched stator is proposed in this paper. Firstly, a single phase BLDC motor needs applying aymmetric air-gap shape because this type motor cannot help having dead-point which is zero torque position. However, using asymmetric air-gap structure causes cogging torque increase. Therefore, this paper proposes the notch shape structure. Notch shape structure has some advantages; low cost, easy to apply. There are 4 optimal factors selected in optimization process, which are position and size of notches. Through building a prototype, the result of FE analysis and the experimental measurement value are compared each other and then vailidity and utility of simulation will be verified.

• Journal of Advanced Marine Engineering and Technology
• /
• 제31권8호
• /
• pp.983-989
• /
• 2007

This paper decribes multi-phase BLDC motor with a minimum torque pulsation among BLDC motor used for electric propulsion system. Multi-phase BLDC motor has characteristic that phase of stator has more than 3-phase. This paper is modeling two type of BLDC motor, one has 3-phase and the other has 7-phase, and it shows simulation of them comparing its characteristics. As a result of simulation, the 7-phase BLDC motor shows better performance in terms of torque pulsation. It is also found that the torque pulsation is reduced further by increasing the number of phase.

• 전력전자학회논문지
• /
• 제13권4호
• /
• pp.295-302
• /
• 2008

본 논문에서는 세탁기용으로 사용될 영구자석형 릴럭턴스 동기전동기(permanent-magnet assisted reluctance synchronous motor : PMA-RSM)의 설계와 특성에 대해서 살펴본다. 제안된 PMA-RSM의 특성과 최대 토크 특성을 알아보기 위해서 유한 요소법(finite element method)을 이용 하였다. 저속 구간에서의 충분한 토크를 발생시키기 위해서 회전자의 구조는 릴럭턴스 토크를 만들어내는 돌극 구조와 회전자 내부의 공극에 영구자석을 삽입하는 구조로 구성되어 있다. 전형적인 자속 장벽형(Flux barrier type) 릴럭턴스 동기전동기(RSM : Reluctance Synchronous Motor)와 자속 장벽(Flux barrier)에 자석을 삽입한 경우에 발생되는 현상들에 대해서 비교 분석하고, 또한 제안된 PMA-RSM의 릴럭턴스 토크(reluctance torque)와 자석에 의한 자석 토크(magnetic alignment torque)가 서로 최대가 되는 시점을 시뮬레이션을 통하여 구하며, 그 결과를 이용하여 전동기의 특성, 평균토크 그리고 토크 리플에 대해서 유한 요소법을 통하여 살펴보았다.

• Journal of Electrical Engineering and Technology
• /
• 제9권6호
• /
• pp.2201-2208
• /
• 2014

In this research, the characteristics of Brush-less DC (BLDC) motor in accordance with winding connection method, both Y-connection and D -connection, has been identified with design methodology simply. BLDC motor has been designed for both winding connections, and their torque analysis has been performed considering ideal current source analysis and voltage source analysis with 6-step control. In addition, to reduce torque ripple of BLDC motor, caused by coil inductance, on voltage source analysis with 6-step control, we have proposed suitable control method which is Phase Advance Control. It is verified that the torque ripple has been decreased by virtue of phase advance control, advancing and widening conduction angle of switching, via performance analysis by Finite Element Analysis.