• Macromolecular Research
• /
• v.10 no.2
• /
• pp.60-66
• /
• 2002

The morphology, dynamic mechanical behavior and fracture behavior of polyetherimide (PEI)/dicyanate semi-interpenetrating polymer networks (semi-IPNs) with a morphology spectrum were analyzed. To obtain the morphology spectrum, we disported PEI particles in the procured dicyanate resin containing 300 ppm of zinc stearate catalyst. The semi-IPNs exhibited a morphology spectrum, which consisted of nodular spinodal structure, dual-phase morphology, and sea-island type morphology, in the radial direction of each dispersed PEI particle due to the concentration gradient developed by restricted dissolution and diffusion of the PEI particles during the curing process of the dicyanate resin. Analysis of the dynamic mechanical data obtained by the semi-IPNs demonstrated that the transition of the PEI-rich phase was shifted toward higher temperature as well as becoming broader because of the gradient structure. The semi-IPNs with the morphology spectrum showed improved fracture energy of 0.3 kJ/$m^2$, which was 1.4 times that of the IPNS having sea-island type morphology. It was found that the partially introduced nodular structure played a crucial role in the enhancement of the fracture resistance of the semi-IPNs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2002.05a
• /
• pp.31-36
• /
• 2002

Recently, more interests in surface treatment of structure with water repellent agent are steadily increased, But, investigation of its properties such as protection, durability, morphology of micro structure is not sufficient. Therefore, This paper is aimed for the investigation of water repellent property and change of morphology of micro pores in mortar that is treated by water repellent agent(Inorganic polymer based material). Water repellent property, water absorption coefficient, air permeability, porosity and the observation of micro structure was investigated in different water repellent agent type. The test results indicated that water repellent treated mortar showed low absorption coefficient and air permeability(breathing effect). This is why inorganic polymer is coated at the wall of capillary and micro pores, also, the volume of micro pore is reduced without the change of morphology in micro structure.

• Journal of Surface Science and Engineering
• /
• v.36 no.5
• /
• pp.379-385
• /
• 2003

The surface morphology, the glossiness and the hardness of Zn-Cr and Zn-Cr-X(X:Co, Mn) alloy electrodeposits were investigated by using chloride bath with EDTA additive and flow cell system. The surface morphology of Zn-Cr alloy and Zn-Cr-Mn alloy changed from fine needle shape crystalline structure to colony structure of fine granular crystallites with increasing current density in the range of 20-100 $A/dm^2$. The surface morphology of Zn-Cr-Co alloy deposited from low Co concentration bath(2.5-10 g/$\ell$) was similar to that of Zn-Cr alloy, while that of Zn-Cr-Co alloy deposited from high cobalt concentration bath was fine granular crystalline structure in the same range of current density. The glossiness of Zn-Cr and Zn-Cr-Mn alloy increased noticeably with increasing current density, while that of Zn-Cr-Mn alloy decreased with increasing Mn concentration of bath in high current density region. The glossiness of Zn-Cr-Co alloy deposited from low Co concentration bath increased with current density while that of the alloy from high Co concentration bath decreased with increasing current density. The hardness of Zn-Cr and Zn-Cr-X alloy increased noticeably with current density.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.19 no.5
• /
• pp.242-245
• /
• 2009

AlN crystals were grown by a sublimation process without seed crystals and the growth morphology of them was characterized. The grown AlN crystals were a polycrystalline phase, which had a diameter of $60\sim200\;{\mu}m$ and were grown with a growth rate of $0.2\sim0.5\;{\mu}n/hr$. It was observed that the as-grown crystals had a hexagonal crystal structure and revealed that these crystals were grown with a morphology of columnar morphology in the initial stage of the growth before they were enlarged in a way of a lateral growth behavior in the final stage. On the surface, a lot of pinholes were observed on the surface of crystals grown. The evolution of a growth morphology was characterized by optical and scanning electron microscopic observation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.602-604
• /
• 2004

NPB surface morphologies deposited on different temperature substrates were investigated using atomic force microscopy(AFM). It has been found that the NPB morphology turned from island morphology at high temperature(100$^{\circ}C$) to grain morphology at room temperature. To characterize the effect of NPB surface morphology, the devices with the structure of Glass/ITO/NPB/$Alq_3$/Al were fabricated using NPB films deposited at different substrate temperature and their performances were compared.

• Clinical and Experimental Reproductive Medicine
• /
• v.40 no.1
• /
• pp.23-28
• /
• 2013

Objective: The aim of the present study was to examine the relationship among male age, strict morphology, and sperm chromatin structure and condensation. Methods: Sperm samples from a total of 100 men underwent semen analysis, and sperm chromatin structure and condensation were assessed with toluidine blue (TB) and aniline blue (AB) tests. Results: Prevalence of strict morphology of less than 4%, and abnormal sperm chromatin structure and condensation did not show any statistically significant differences according to male age (p=0.605, p=0.235, and p=0.080). No significant correlation was demonstrated among age of male partners, strict morphology, and abnormal sperm chromatin structure using TB and AB tests. However, abnormal sperm chromatin condensation was positively associated with sperm chromatin structure (r=0.594, p=0.000) and showed negative correlation with strict morphology (r=-0.219, p=0.029). Conclusion: The tests for sperm chromatin condensation showed a significant association with strict morphology. Further study is needed to elucidate the relationship between clinical outcome and sperm chromatin tests.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.11
• /
• pp.3711-3718
• /
• 2012

Here, we report a chain-length dependent morphology and pore structure tailing of mesoporous silica templated from organogels, which is formed by primary alkylamine and ethylene glycol at room temperature. As the chain length of alkylamine changes from 12 to 18, the resulted materials exhibit a morphology change from layers to spheres and platelets, respectively. SEM and TEM observation revealed that these shapes appear to be inherited from their parent organogels. Further pore structure characterization by nitrogen sorption analysis demonstrates that all the resulted silicas exhibit typical IV isotherms indicative of uniform mesopores, and their pore sizes are dependent on the chain length of alkylamine used.

• Macromolecular Research
• /
• v.14 no.1
• /
• pp.59-65
• /
• 2006

We report a new approach to fabricate electrospun polymer nonwoven mats with porous surface morphology by varying the collector temperature during electrospinning. Polymers such as poly(L-lactide) (PLLA), polystyrene (PS), and poly(vinyl acetate) (PVAc) were dissolved in volatile solvents, namely methylene chloride (Me) and tetrahydrofuran (THF), and subjected to electrospinning. The temperature of the collector in the electrospinning device was varied by a heating system. The resulting nonwoven mats were characterized by using scanning electron microscopy (SEM), field emission SEM (FESEM), and atomic force microscopy (AFM). We observed that the surface morphology, porous structure, and the properties such as pore size, depth, shape, and distribution of the nonwoven mats were greatly influenced by the collector temperature.

• Polymer(Korea)
• /
• v.25 no.5
• /
• pp.707-718
• /
• 2001

Polypropylene (PP) exhibits many beneficial properties such as low density high thermal stability, chemical resistance, good processability and recyclability. However, only limited research has been done on expanded polypropylene (EPP). In this study, we were trying to prepare EPP with chemical blowing agent. Ethylene-octene copolymer (mPE) was melt blended with PP to enhance melt fluidity of PP at processing temperature and to make more flexible foamed material. Prior to foaming, phase morphology of PP/mPE blends were investigated to examine the effect of phase morphology on the foaming ratio and cell structure of foams. Phase morphology of PP/mPE blends were affected by the content of mPE and mixing torque ratio. At the same composition, it was affected by mixing rpm. High blowing ratio and stable cell structure were obtained in the blend which has the continuous PP matrix with dispersed droplets of mPE.

• KSTLE International Journal
• /
• v.9 no.1_2
• /
• pp.22-25
• /
• 2008

This paper investigated the wetting and adhesion property of undulated DLC film with surface morphology controlled for a reduced real area of contact. The undulated DLC Films were prepared by 13.56 MHZ radio frequency plasma enhanced chemical vapor deposition (r.f. PECVD) by using nanoscale Cu dots surface on a Si (100) substrate. FE-SEM, AFM analysis showed that the after repeated deposition and plasma induced damage with Ar ions, the surface was nanoscale undulated. This phenomenon changed the surface morphology of DLC surface. Raman spectra of film with changed morphology revealed that the plasma induced damage with Ar ions significantly suppressed the graphitization of DLC structure. Also, it was observed that while the untreated flat DLC surfaces had wetting angle starting ranged from $72^{\circ}$ and adhesion force of 333ni. Had wetting angle the undulated DLC surfaces, which resemble the surface morphology of a cylindrical shape, increased up to $104^{\circ}$ and adhesion force decreased down to 11 nN. The measurements agree with Hertz and JKR models. The surface undulation was affected mainly by several factors: the surface morphology affinity to cylindrical shape, reduction of the real area of contact and air pockets trapped in cylindrical asperities of the surface.