• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.571-580
• /
• 1998

The numerical model that can describe the ignition of pseudospark discharge using hybrid fluid-particle(Monte Carlo )method has been developed. This model consists of the fluid expression for transport of electrons and ions and Poisson's equation in the electric field. The fluid equation determines the spatiotemporal dependence of charged particle densities and the ionization source term is computed using the Monte carlo method. This model has been used to study the evolution of a discharge in Argon at 0.5 torr, with an applied voltage if 1kV. The evolution process of the discharge has been divided into four phases along the potential distribution : (1) Townsend discharge, (2) plasma formation, (3) onset of hollow cathode effect, (4) plasma expansion. From the numerical results, the physical mechanisms that lead to the rapid rise in current associated with the onset of pseudospark could be identified.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.2058-2062
• /
• 2009

1992년 한강수계법이 제정되면서 우리나라에 도입된 오염총량관리제는 현재 2차총량관리 시행계획수립 단계에 이르렀다. 오염총량제에서 수질모델은 수계구간별로 설정된 기준유량과 목표수질 조건을 달성하는 지를 판단할 수 있는 도구로 사용되며, 다양한 모델들이 사용되고 있다. 그 중 하천수질모형으로는 주로 QUAL2E, QUALKO, QUALKO2 모형으로 압축할 수 있다. QUAL2E 모형은 1980년대에 개발되어 국내외로 널리 이용하고 있으나 SOD를 0차나 일정량으로 처리하였고, 부착조류에 의한 용존산소 변화와 부유 조류 사멸시 발생하는 유기물이 고려되지 않았다. 또한 용존산소가 부족한 상태에서 반응이 활발한 탈질화과정이 포함되지 않아 이들 반응에 의해 수질이 영향을 받는 하천에 적용하기에는 한계가 있었다. 그리고 QUAL2E 모델은 여러 개의 지류를 가진 대형 하천에는 적용하기 어려운 단점이 있다. 국내에서는 1999년 QUAL2E 모델에 WASP5의 장점을 접목시켜 QUALKO 모델을 개발하였다. 이 모델은 QUAL2E에 부유성 조류의 사멸로 인한 유기물의 내부증가, 탈질화 반응 및 부착식물의 광합성 호흡 과정을 추가한 것이다. 또한 QUAL2E 모델에서 BOD는 CBOD로 입력되고 모의되므로 bottle BOD의 개념이 결여되어 있으므로 이러한 문제점을 보완하고, 조류의 생산 및 사멸에 의한 내부생산 유기물 증가와 탈질화 반응 과정을 추가한 것이다. 우리나라에서 진행되고 있는 총량관리 대상물질은 2010년까지는 $BOD_5$이며, 2011년부터는 일부 지역에 총인이 포함될 예정이다. 2007년에 실험실에서 측정하는 BOD5나 유기성 질소 또는 유기성 인을 그대로 입력하여 계산되고 출력할 수 있으며, 향후 오염총량제의 관리대상항목으로 논의되고 있는 TOC를 모의할 수 있는 QUALKO2가 개발되었다. 이에 본 연구에서는 향후 활용도가 클 것으로 기대되는 QUALKO2 모형에 기존 QUAL2E-UNCAS 모형에 서 수행할 수 있는 불확실성 해석 기법인 Monte Carlo 모의를 가능하도록 모형을 수정하고자 한다. 실제 하천에서의 수질해석에 대한 단순한 표현인 수학적 모형은 불확실성을 내포하고 있으며, Monte Carlo 해석을 사용하여 모형의 불확실도 정량화와 매개변수의 불확실성을 통계학적으로 기술할 수 있다. 또한 각 지점에 대한 계산결과치들에 대해 빈도 및 누가빈도분포 값을 제시함으로서 모형 예측치들의 전반적인 분포경향을 평가할 수 있으며, 하천수질에 대해서 환경기준치를 위배할 가능성을 산정하는데 활용할 수 있다. 우리나라 실정에 맞는 QUALKO2 모형에 Monte Carlo 모의를 통해 신뢰도 기반의 수질해석을 수행하게 된다면 수질정책의 기초자료 제공에 기여할 것으로 판단된다.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.3
• /
• pp.242-250
• /
• 2019

The speed and power performance of a ship is not only a guarantee issue between the ship owner and the ship-yard, but also is related with the Energy Efficiency Design Index (EEDI) regulation. Recently, International Organization for Standardization (ISO) published the procedure of the measurement and assessment for ship speed and power at sea trial. The results of speed and power performance measured in actual sea condition must inevitably include various uncertainty factors. In this study, the influence for systematic error of shaft power measurement system was examined using the Monte Carlo simulation. It is found that the expanded uncertainty of speed and power performance is approximately ${\pm}1.2%$ at the 95% confidence level(k=2) and most of the uncertainty factor is attributed to shaft torque measurement system.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.16 no.4
• /
• pp.401-406
• /
• 2003

This paper deals with stress analysis of single-lap adhesive joints which have uncertain material properties. Basically, material properties have a certain amount of scatter and such uncertainties can affect the performance of joints. In this paper, the convex modeling is introduced to consider such uncertainties in calculating peel and shear stress of adhesive joints and the results are compared with those from the Monte Carlo simulation. Numerical results show that stresses increase when uncertainties considered, which indicates that such uncertainties should not be ignored for estimation of structural safety. Also, the results obtained by the convex modeling and the Monte Carlo simulation show good agreement, which demonstrates the effectiveness of convex modeling.

• Tunnel and Underground Space
• /
• v.14 no.2
• /
• pp.97-107
• /
• 2004

Various kinds of rock mass properties, which can be obtained from laboratory tests as well as field tests, can be reasonably applied to the design of earth structures. An extrapolation technique can be used for this application and it generally guarantee its quality from a sufficient amount of test results because it is based on the RMR value in most cases. When the confident RMR can not be obtained because of the insufficient testing results, the Monte Carlo Simulation technique can be introduced fer deducing the proper RMR and this assessed RMR can be reused fur the major input parameters. Authors' proposed method can be verified from the comparison between the results of numerical analysis and the evidences of field site.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.5
• /
• pp.508-516
• /
• 1999

This paper presents a method for constructing composite power system effective load duration curves(CMELDC) at load points by Monte Carlo method. The concept of effective load duration curves(ELDC) in power system planning is useful and important in both HLII. CMELDC can be obtained from convolution integral processing of the probability function of unsupplied power and the load duration curve at each load point. This concept is analogy to the ELEC in HLI. And, the reliability indices (LOLP, EDNS) for composite power system are evaluated using CMELDC. Differences in reliability levels between HLI and HLII come from considering with the uncertainty associated with the outages of the transmission system. It is expected that the CMELDC can be applied usefully to areas such as reliability evaluation, probabilistic production cost simulation and analytical outage cost assessment, etc. in HLII, DC load flow and Monte Carlo method are used for this study. The characteristics and effectiveness of thes methodology are illustrated by a case study of the IEEE RTS.

• Tunnel and Underground Space
• /
• v.22 no.2
• /
• pp.86-92
• /
• 2012

Point estimate method has a less accuracy than Monte Carlo simulation that is usually considered as an exact probabilistic method, but this method still remains popular in probability-based reliability assessment in geotechnical and rock engineering, because it significantly reduce the number of sampling points and produces the statistical moments of a performance function in a reasonable accuracy. In the present study, we investigated the accuracy and applicability of point estimate methods proposed by Rosenblueth and Zhou & Nowak by comparing the results of these two methods with those of Monte Carlo simulations. The comparison was carried out for the problem of a lined circular tunnel in an elastic medium where an closed-form analytical solution is given. The comparison results showed that despite the non-linearity of the analytical solution, the statistical moments calculated by the point estimate methods and the Monte Carlo simulations agreed well with an average error of roughly 1-2%. This average error demonstrates the applicability of the two point estimate methods for the probabilistic reliability assessment of underground structures in combination with numerical analysis.

• Journal of Korea Water Resources Association
• /
• v.31 no.3
• /
• pp.337-345
• /
• 1998

DAMBRK-U model is developed for the evaluation of overtopping risk of dam and levee and for the estimation of uncertainty in floodwave simulation. The original algorithm is revised and expanded to include Monte-Carlo analysis to estimate them. The model is tested by applying to hypothetical channels of widening, uniform and narrowing geometry. Larger variation in discharge and water depth are expected at narrower sections of a river. It is calibrated by applying to the Hantan River, where severe damages from Yunchun dam-break and levee overtopping occurred on July, 1996. Overtopping risk of dam is calculated for various discharge conditions for Yunchun-dam, and that of levee is also calculated by comparing levee height with flood level at Hantan recreation area. Simulation results show that the overflow depth of flood level is 1,266~0.782 m and the overflow risk turns out to be 100%.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.2
• /
• pp.187-193
• /
• 2009

Dynamic response of an elastic pendulum system under random excitations was studied by using the Lagrangian equations of motion which uses the kinetic and potential energy of a target system. The responses of random excitations were calculated by using Monte Carl simulation which uses the series of random numbers. The procedure of Monte Carlo simulation is generation of random numbers, system model, system output, and statistical management of output. When the levels of random excitations were changed, the expected responses of the pendulum system showed various responses.

• Journal of Korean Association for Spatial Structures
• /
• v.10 no.1
• /
• pp.75-84
• /
• 2010

According to the available study and experimental data about the long term behavior of CFT(Concrete Filled Tube) columns, the creep and of concrete in CFT columns are smaller than those of RC columns because of the confinement effect of outer steel columns. In this study, the uncertainties associated with assumed values for concrete properties such as strength, creep coefficients, and service load have been considered and analyzed for the prediction of time-dependent column shortening of CFT column. The CFT column shortening analysis using Monte Carlo method is proposed and an of a 37 story tall building with CFT columns is studied for illustration. According to the results obtained by the probability analysis with multi parameters, the effect of variation coefficient for 3 parameters is investigated considering confidence interval.