Journal of the Computational Structural Engineering Institute of Korea (한국전산구조공학회논문집)

Computational Structural Engineering Institute of Korea (한국전산구조공학회)
권호 표지

Stress Analysis of Single-Lap Adhesive Joints Considering Uncertain Material Properties

물성치의 불확실성을 고려한 단일 겹치기 이음의 응력해석

  • Published : 2003.12.01
Download PDF
⟨ Previous Next ⟩

Abstract

This paper deals with stress analysis of single-lap adhesive joints which have uncertain material properties. Basically, material properties have a certain amount of scatter and such uncertainties can affect the performance of joints. In this paper, the convex modeling is introduced to consider such uncertainties in calculating peel and shear stress of adhesive joints and the results are compared with those from the Monte Carlo simulation. Numerical results show that stresses increase when uncertainties considered, which indicates that such uncertainties should not be ignored for estimation of structural safety. Also, the results obtained by the convex modeling and the Monte Carlo simulation show good agreement, which demonstrates the effectiveness of convex modeling.

접착제와 피착재의 물성치는 고정된 값을 가지기보다 항상 어느 정도의 불확실성을 내포하고 있으며, 이는 결합부의 성능에 영향을 미치게 된다. 본 논문에서는 컨벤스 모델링을 이용하여 불확실한 물성치를 갖는 단일 겹치기 이음의 응력해석을 수행하였다. 불확실성을 고려한 수치해석 결과, 결합부에 작용하는 전단 및 수직 응력은 증가하였으며 이는 결합부의 강도 해석에 불확실성이 반드시 고려되어야 함을 보여준다. 또한 컨벡스 모델링의 신뢰성과 효율성을 입증하기 위해 몬테카를로 기법에 의한 응력 해석 결과와 비교하였으며, 두 방법에 의한 결과는 잘 일치함을 알 수 있었다.

Keywords

References

  1. Ojalvo, I. U. and Eidinoff, H. L., Bond Thickness Effects upon Stresses in Single-Lap Adhesive Joints, AIAA J., Vol.16, No.3, 1978, pp. 204-211 https://doi.org/10.2514/3.60878
  2. Chien-Chang Lin and Yee-Shown Lin, A Finite Element Model of Single-Lap Adhesive Joints, Int. J. Solids. Struct, Vol.30, No.12, 1993, pp.1679-1692 https://doi.org/10.1016/0020-7683(93)90197-F
  3. Chihdar Yang and Su-Seng Pang, Stress- Strain Analysis of Single-Lap Composite Joints Under Tension, J. Engineering Materials and Technology, Vol.118, 1996, pp.247-255 https://doi.org/10.1115/1.2804896
  4. Shiuh-Chuan Her, Stress Analysis of Adhesively -Bonded Lap Joints, Compos. Struct., Vol.47, 1999, pp.673-678 https://doi.org/10.1016/S0263-8223(00)00052-0
  5. Ben-Haim, Y. and Elishakoff, I., Convex Models of Uncertainty in Applied Mechanics, Elsevier, Amsterdam, 1990
  6. Elishakoff, I. and Starns, J. H., A Deterministic Method to Predict the Effects of Unknown-but-Bounded Elastic Moduli on the Buckling of Composite Structures, Comput. Methods Appl. Mech. Engng., Vol.111, 1994, pp.155-167 https://doi.org/10.1016/0045-7825(94)90043-4
  7. Lombardi, M., Optimization of Uncertain Structures Using Non-probabilistic Models, Comput. Struct., Vol.67, 1998, pp.99-103 https://doi.org/10.1016/S0045-7949(97)00161-2
  8. Kim, T. U., and Sin, H. C., Optimal Design of Composite Laminated Plates with the Discreteness in Ply Angles and Uncertainty in Material Properties Considered, Comput. Struct., Vol.79, 2001, pp.2501-2509 https://doi.org/10.1016/S0045-7949(01)00133-X