• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.27 no.3
• /
• pp.261-268
• /
• 2016

In this paper, dual-polarized monopulse cassegrain antenna for W-band millimeter-wave seeker was proposed and the performances were verified by the measured results of the fabricated antenna. Dual-polarized monopulse Cassegrain antenna consists of main/subreflector, dual-polarized feed horn and monopulse comparator. The proposed feed horn has $2{\times}2$ array square waveguide feeding structure to make monopulse signals and it was designed using 90 degree rotational symmetric structure to receive dual-polarized signals. At the sum and difference channel, the measured vertical and horizontal polarization radiation pattern were similar. Measurement gains are 35.1 dBi for v-pol. and 35.6 dBi for h-pol. at the center frequency with 0.5dBi difference between each polarization and the side lobe level is below -21.6 dB.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.7
• /
• pp.576-579
• /
• 2017

Due to the existence of flash lobe caused by the radome structure, a radar return in general contains clutter component added to target echo. Unlike jammer, clutter is apt to simultaneously coexist with target echo, which hinders a monopulse radar from estimating the angle difference between target echo direction and radar steering direction. In this paper, we propose a clutter estimation algorithm applicable to generalized sidelobe canceller(GSC) based monopulse radar. We show that clutter estimation can be achieved via iterative process of the orthogonal projections. Through simulations, the proposed GSC-based system combined with the clutter estimation can outperform the conventional monopulse system in terms of target angle estimation.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.5
• /
• pp.514-520
• /
• 2015

Sidelobe canceller(SLC) requires main beam pattern(SUM beam) and auxiliary beam patterns for rejection of sidelobe noise jammer. For best performance of sidelobe noise jamming cancellation of adaptive SLC, gain dominant region of each auxiliary beam pattern shall not be overlapped one another in elevation/azimuth regions of sidelobe of main beam, and beam patterns of auxiliary channels should have low gains in regions of mainlobe of main beam. In the monopulse radar, the difference beam patterns for monopulse processing have these properties. This paper proposes the method using data from the difference channel for monopulse processing as data from auxiliary channel for sidelobe cancellation. For the proposed SLC, the results of simulation and performance analysis was presented. If the proposed method is used in the monopulse radar, SLC can be constructed by using basic SUM and difference channels without extra channel composition.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.1
• /
• pp.229-236
• /
• 2017

In general, an error budget of monopulse radar is proposed by manufacturer who assuming that all of external enviromental error resources such as multipath, glint, dynamic lag variation are removed. So until now, a measurement uncertainty of monopulse radar can be discussed including external enviromental error resources. In this paper, it is described that which kinds of error resource can effect on monopulse radar measurement uncertainty for different target property. To prove it experimentally, at first a simulation result is described assuming that all of external enviromental error resources are removed. It only includes receiver thermal noise. And then, monopulse radar measurement uncertainty estimation results tracking on calibration target which is fixed on specific position, calibration sphere which is moving slowly, weapon systems firing test which is moving fast are described quantitativly. All of these targets have different dynamic property.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.1
• /
• pp.87-94
• /
• 2008

This paper proposes a high-gain monopulse antenna using the folded reflectarray for a monopulse target-tracking radar systems designed at the center frequency of 94 GHz. In target-tracking radar systems, the angle of arrival of the incoming wave Is determined by comparing the signal received on two or more non-coincident antenna patterns. This is the physical basis of most target-tracking techniques and the comparison is made simultaneously in a monopulse radar systems. In this paper, the antenna consists of polarizing grid, reflectarray, multimode feed horn, and comparator implemented by wavguide. The antenna is able to have three radiation patterns by using the monopulse feed systems assembled by multimode feed horn and comparator. The antenna demonstrates maximum gains 36dB, 33.5dB and 27.2dB at sum mode, azimuth mode, and evevation mode respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1413-1419
• /
• 2015

Monopulse RADAR is the radar which detects the range of the target using a single transmitted signal. In this paper, using 9.41GHz X-band radar, the research for the phase comparison monopulse algorithm used in the marine environment is conducted. In addition, by applying the phase comparison monopulse algorithm, we calculate the RMSE for the various antenna spacings and the positions of the target. Based on that result, we compare the performance of the phase comparison monopulse algorithm in the uniform linear array with that in the non-uniform linear array. Finally, the differences in performance among the MUSIC algorithm, Bartlett method and the proposed phase comparison monopulse algorithm are analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.29 no.2
• /
• pp.146-149
• /
• 2018

A monopulse sensor is used to estimate the angle of a target with respect to each received single pulse. It is well known that the cross-eye technique can result in an angle deception effect against monopulse sensors. To verify this effect, we propose a test environment configuration for the angle deception using monopulse receiving antennae and cross-eye transmitters in an anechoic chamber. Using the proposed test environment configuration, we have measured powers of the sum and difference of the signals received by the monopulse receiving antennae when the distance of the two cross-eye transmitters is varied. Finally, the angle deception performance related to the powers of the sum and difference signals was analyzed.

• Smart Media Journal
• /
• v.9 no.4
• /
• pp.60-65
• /
• 2020

The monopulse tracking algorithm can estimate the location of a partner station based on an RF (Radio Frequency) signal. The location of the partner station is estimated based on the monopulse ratio curve (MR-C), which is calculated based on the sum and difference signal patterns of an antenna. Therefore, the range in which the estimated location can be calculated with high accuracy increases in proportion to the linear region of MR-C. In this paper, we proposed a method to extend the linear region of the MR-C curve using the beamforming technique for the tracking antenna system using the active phased array antenna. Simulation results based on the same antenna system, it was confirmed that the linear region of MR-C was enlarged by about twice as much as the general case where the proposed method was not applied.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.583-590
• /
• 2018

Cross eye technique was proposed as an angle deception jamming technique against monopulse radars. Tracking radars use monopulse or conical scan methods for angle estimation of a target. Thus, if we verify deception performance of cross eye technique against a conical scan radar, efficient jamming systems can be developed to disturb both monopulse radars and conical scan radars. In this paper, we propose a mathematical model for a conical scan radar and a cross eye system. Using the proposed model, angular deception performance of the cross eye technique against conical scan radar is analyzed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.96-103
• /
• 2003

A cavity-backed microstrip patch antenna for a monopulse radar system is designed and fabricated. Also, this antenna is shown to be suitable for the system by analyzing the measured results. Since the azimuthal beamwidth required by this system is quite broad compared to that of a usual microstrip antenna, the width of a microstrip patch is reduced considerably. The decrease of an antenna bandwidth due to the reduced patch width is compensated by increasing the effective substrate thickness. A detection range and a detection probability is calculated from the measured gain at a given angle, and this result shows that the fabricated antenna can be applied well to this monopulse radar system.