• Elastomers and Composites
• /
• v.54 no.4
• /
• pp.359-367
• /
• 2019

Poly(2-hydroxyethyl methacrylate) (PHEMA) hydrogels modified with various co-monomers, such as N-vinyl pyrrolidone (NVP), glycidyl methacrylate (GMA), and glycerol monomethacrylate (GMMA), were prepared to investigate the effect of adding a co-monomer on the water contents, surface wettability, and tensile modulus. These polymers were synthesized by thermal- and photo-polymerization in the presence of azobisisobutyronitrile (AIBN) and diphenyl(2,4,6-trimethylbenzoyl)-phosphineoxide (TPO) as the initiators. The characteristics of the hydrogels were analyzed via FTIR and UV/Vis spectroscopies, contact angle measurements, and tensile modulus measurements with UTM. Regarding the properties of water in the hydrogels, the ratio between free to bound water was investigated using differential scanning calorimetry (DSC). The effects of adding the co-monomers on the water content, surface wettability, and tensile modulus for soft contact lenses were also investigated. In the case of p(HEMA-co-NVP) hydrogels, the increase in the equilibrium water content (EWC) was primarily due to the increase in the bound water content. For p(HEMA-co-GMMA) hydrogels, an increase in free water content was the main reason for the increased EWC. In contrast, in the case of p(HEMA-co-GMA) hydrogels, a decrease in bound water content was observed to be the main factor that reduced the EWC. Photo-polymerized PHEMA hydrogels showed enhanced surface wettability and tensile modulus as compared to those produced via thermal polymerization.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.94-99
• /
• 2013

Polydiacetylene (PDA) is made by photopolymerization of self-assembled diacetylene monomers. If diacetylene monomers are arranged systematically and close enough with distance of atoms, 1,4-addition polymerization will occur by the irradiation of 254 nm ultraviolet rays and then PDA will have alternated ene-yne polymer chains at the main structure. Aqueous solutions of diffused PDA is tinged with blue which shows ${\lambda}_{max}$ 640 nm. Visible color changes from blue to red occurs in response to a variety of environmental perturbations, such as temperature, pH, and ligand-receptor interactions. In this study, we synthesized cationic peptides - PCDA(10,12-pentacosadyinoic acid) liposome using a solid phase peptide synthesis (SPPS) method and prepared liposome solutions at various molar ratios using MPEG-PCDA. When mammalian cells were treated with the liposomes, high transfection efficiency and low toxicity were observed.

• 한국생물공학회:학술대회논문집
• /
• 2000.11a
• /
• pp.48-51
• /
• 2000

The poly(3-hydroxybutyrate) (PHB) synthase of Ralstonia. eutropha, which was produced by a recombinant strain E. coli and purified in one-step with a methyl-HIC column to a purity of more than 90%, was used to polymerize 3-hydroxypropionyl-CoA (3HPCoA) and to copolymerize 3HPCoA with 3-hydroxybutyryl-CoA (3HBCoA) in vitro. A $K_m$ of $189\;{\mu}M$ and a $k_{cat}$ of $10\;sec^{-1}$ were determined for the activity of the enzyme in the polymerization reaction of 3HPCoA based on the assumption that the dimer form of PHB synthase was the active form. Free coenzyme A was found to be a very effective competitive inhibitor for the polymerization of 3HPCoA with a $K_i$ of $85\;{\mu}M$. The maximum degree of conversion of 3HPCoA to polymer was less than 40 %. In the simultaneous copolymerization reactions of these two monomers, both the turnover number for the copolymerization reaction and the maximum degree of conversion of 3HPCoA and 3HBCoA to copolymers increased with an increase in the amount of 3HBCoA in the monomer mixture. However, the maximum conversion of 3HPCoA to a copolymer was less than 35 % regardless of the ratio of 3HPCoA to 3HBCoA. Block copolymers were obtained by the sequential copolymerization of the two monomers and these copolymers had a much narrower molecular weight distribution than those obtained by the simultaneous copolymerization of the same molar ratio of 3HPCoA and 3HBCoA.

• Toxicological Research
• /
• v.28 no.4
• /
• pp.235-240
• /
• 2012

$^{99m}Tc$ tricarbonyl glycine monomers, trimers, and pentamers were synthesized and evaluated for their radiolabeling and in vivo distribution characteristics. We synthesized a $^{99m}Tc$-tricarbonyl precursor with a low oxidation state (I). $^{99m}Tc(CO)_3(H_2O)_3^+$ was then made to react with monomeric and oligomeric glycine for the development of bifunctional chelating sequences for biomolecules. Labeling yields of $^{99m}Tc$-tricarbonyl glycine monomers and oligomers were checked by high-performance liquid chromatography. The labeling yields of $^{99m}Tc$-tricarbonyl glycine and glycine oligomers were more than 95%. We evaluated the characteristics of $^{99m}Tc$-tricarbonyl glycine oligomers by carrying out a lipophilicity test and an imaging study. The octanol-water partition coefficient of $^{99m}Tc$ tricarbonyl glycine oligomers indicated hydrophilic properties. Single-photon emission computed tomography imaging of $^{99m}Tc$-tricarbonyl glycine oligomers showed rapid renal excretion through the kidneys with a low uptake in the liver, especially of $^{99m}Tc$ tricarbonyl triglycine. Furthermore, we verified that the addition of triglycine to prototype biomolecules (AGRGDS and RRPYIL) results in the improvement of radiolabeling yield. From these results, we conclude that triglycine has good characteristics for use as a bifunctional chelating sequence for a $^{99m}Tc$-tricarbonyl-based biomolecular imaging probe.

• Journal of Adhesion and Interface
• /
• v.20 no.1
• /
• pp.15-22
• /
• 2019

In this study, polybutadiene based di-functional urethane acrylate oligomer (PB-UAO) were synthesized from polybutadiene diol and isophorone diisocyanate. And then, pressure sensitive adhesive films were prepared by mixing with synthesized oligomer, tri-functional acrylate monomer (Tris(2-acryloyloxyethyl) isocyanurate (TAOEIC) or Trimethylolpropane triacrylate (TMPTA) or Pentaerythritol triacrylate (PETA)), mono-functional acrylate monomer (Stearyl acrylate) and UV initiators. Effects of types and contents of trifunctional acrylate monomers on peel strength, tensile strength, elongation, thermal stability and water absorption property were studied. As the contents of tri-functional acrylate monomer increased, and as the molecular weight of tri-functional acrylate monomer decreased, peel strength, elongation and water absorption showed a tendency to decrease whereas tensile strength and thermal stability showed a tendency to increase.

• Journal of Adhesion and Interface
• /
• v.21 no.4
• /
• pp.135-142
• /
• 2020

Recently, people's interest in eco-friendly plastics derived from nature to replace petroleum-based plastics is increasing due to environmental problems such as microplastics. In line with this trend, eco-friendly adhesives using natural materials and processes are also being developed in the adhesive field. Among them, maltose is a natural substance derived from starch and is the main component of starch syrup used as a food additive. Due to its lower molecular weight than starch, it is easily soluble in water, and above all, there is a possibility that it can be copolymerized with other monomers through solution polymerization. However, researches related to the application of maltose to adhesives are very rare. In this study, after modifying maltose using acrylic anhydride, the product was analyzed through FT-IR and H-NMR. And the modified maltose was copolymerized with two kinds of acrylic monomers. The synthesized adhesive was applied on the wood and the adhesive performance were investigated.

• Mass Spectrometry Letters
• /
• v.13 no.4
• /
• pp.177-183
• /
• 2022

The monomer and dimer structures of the amyloid fragment Aβ(1-16) sequence formed in H₂O were investigated using electrospray ionization mass spectrometry (MS) and tandem MS (MS/MS). Aβ16 monomers and dimers were indicated by signals representing multiple proton adduct forms, [monomer+zH]ⁿ⁺ (=M^z+, z = charge state) and [dimer+zH]^z+ (=D^z+), in the MS spectrum. Fragment ions of monomers and dimers were observed using collision-induced dissociation MS/MS. Peptide bond dissociation was mostly observed in the D1-D7 and V11-K16 regions of the MS/MS spectra for the monomer (or dimer), regardless of the monomer (or dimer) charge state. Both covalent and non-covalent bond dissociation processes were indicated by the MS/MS results for the dimers. During the non-covalent bond dissociation process, the D³⁺ dimer complex was separated into two components: the M¹⁺ and M²⁺ subunits. During the covalent bond dissociation of the D³⁺ dimer complex, the b and y fragment ions attached to the monomer, (M+b_10-15)^z+ and (M+y_9-15)^z+, were thought to originate from the dissociation of the M²⁺ monomer component of the (M¹⁺+M²⁺) complex. Two different D³⁺ complex geometries exist; two distinguished interaction geometries resulting from interactions between the M¹⁺ monomer and two different regions of M²⁺ (the N-terminus and C-terminus) are proposed. Intricate fragmentation patterns were observed in the MS/MS spectrum of the D⁵⁺ complex. The complicated nature of the MS/MS spectrum is attributable to the coexistence of two D⁵⁺ configurations, (M¹⁺+M⁴⁺) and (M²⁺M³⁺), in the Aβ16 solution.

• Journal of dental hygiene science
• /
• v.23 no.4
• /
• pp.264-270
• /
• 2023

Background: Resin-based dental materials release residual monomers or other substances from incomplete polymerization into the oral cavity, thereby causing adverse biological effects on oral tissue. 10-Methacryloyloxydecyl dihydrogen phosphate (10-MDP), an acidic monomer containing dihydrogen phosphate and methacrylate groups, is the most commonly used component of resin-based dental materials, such as restorative composite resins, dentin adhesives, and resin cements. Although previous studies have reported the cytotoxicity and biocompatibility in various cultured cells, the effects of resin monomers on cellular aging have not been reported to date. Therefore, this study aimed to investigate the effects of the resin monomer 10-MDP on cellular senescence and inflamm-aging in vitro. Methods: After stimulation with 10-MDP, MC3T3-E1 osteoblast-like cells were examined for cell viability by WST-8 assay and reactive oxygen species (ROS) production by flow cytometry. The protein and mRNA levels of molecular markers of aging were determined by western blotting and RT-PCR analysis, respectively. Results: Treatment with 0.05 to 1 mM 10-MDP for 24 hours reduced the survival of MC3T3-E1 cells in a concentration-dependent manner. The intracellular ROS levels in the 10-MDP-treated experimental group were significantly higher than those in the control group. 10-MDP at a concentration of 0.1 mM increased p53, p16, and p21 protein levels. Additionally, an aging pattern was observed with blue staining due to intracellular senescence-associated beta-galactosidase activity. Treatment with 10-MDP increased the levels of tumor necrosis factor-α, interleukin (IL)-1β, IL-6 and IL-8, however their expression was decreased by mitogen-activated-protein-kinase (MAPK) inhibitors. Conclusion: Taken together, these results suggest that the exposure of osteoblast-like cells to the dental resin monomer 10-MDP, increases the level of cellular senescence and the inflammatory response is mediated by the MAPK pathway.

• Journal of Food Hygiene and Safety
• /
• v.30 no.1
• /
• pp.81-86
• /
• 2015

The purpose of our paper was to investigate the migration level of 4,4'-MDA(4,4'-methylenedianiline), 2,4-TDA(2,4-toluenediamine), aniline, acrylonitrile and methylmeth acrylate from plastic cookwares into food simulants and to evaluate the safety of each monomers. The test articles for monomers were PA (polyamide) items for 4,4'-MDA, 2,4-TDA and aniline, PU (polyurethane) items for 4,4'-MDA, ABS (acrylonitrile-butadiene- styrene) items for acrylonitrile, and acrylic resin items for methylmethacrylate. All the article samples of 321 intended for contact with foods were purchased in domestic market. 4,4'-MDA, 2,4-TDA and aniline were analyzed by LC-MS/MS (liquid chromatography -tandem mass spectrometer), acrylonitrile by GC-NPD (gas chromatography-nitrogen phos phorus detector) and methyl methacrylate by GC-FID (gas chromatography-flame ionization detector). The migration level of monomers were within the migration limits of Ministry of Food and Drug Safety (MFDS). As a result of safety evaluation, our results showed that the estimated daily intake (EDI, mg/kg bw/day)s were $2.39{\times}10^{-9}$ and $1.20{\times}10^{-9}$ for 4,4'-MDA and 2,4-TDA of PA, $4.32{\times}10^{-9}$ for acrylonitrile of ABS and $2.27{\times}10^{-7}$ for methylmethacrylate of acrylic resin. Reference Dose (RfD, mg/kg bw/day) of acrylonitrile and tolerable daily intake (TDI, mg/kg bw/day) of methacrylate were established respectively as 0.001 by EPA (US Environmental Protection Agency) and as 1.2 by WHO (World Health Organization). When comparing with RfD and TDI, the EDIs of acrylonitrile and methylmethacrylate accounted for $4.32{\times}10^{-4}%$ and $1.89{\times}10^{-5}%$ respectively.

• Journal of Photoscience
• /
• v.7 no.4
• /
• pp.131-133
• /
• 2000

A Styrene-derived polymer having pendent phenoxyanthraquinones for photochromism was prepared by AIBN-initiated radical polymerization. Syntgesus of the monomers was straightforward and the polymer was obtained in 65% yield. Photoinduced rearrangement from the “trans” quinone forms to the “ana” quinone forms readily occurred both in solution and in film when the polymer was irradiated with UV light.