• Food Science and Preservation
• /
• v.16 no.5
• /
• pp.719-725
• /
• 2009

We investigated the absorption characteristics of protein-bound polysaccharide powders of various molecular weights isolated from the mushroom Agaricus blazei Murill. The monolayer moisture content calculated using the GAB equation showed a higher level of significance than did the BET equation. The higher the water activity, the lower the isosteric heat of sorption. The fitness of the isotherm curve was shown to be in the order of the Khun, Oswin, Caurie and Henderson models. The prediction model equations for moisture content were established by use of ln(time), water activity, and temperature.

• Archives of Pharmacal Research
• /
• v.28 no.7
• /
• pp.839-847
• /
• 2005

The aim of this study was to provide the basis to further examine the mode of action of ethanol. Fluorescent probes reported to have different membrane mobilities were used to evaluate the effect of dimyristoylphosphatidylethanol (DMPEt) on the lateral and rotational mobilities of liposome lipid bilayers. An experimental procedure, based on the selective quenching of 1,6-diphenyl-1,3,5-hexatriene (DPH) and 1,3-di(1-pyrenyl)propane (Py-3-Py) by trinitrophenyl groups, was used. DMPEt increased the bulk lateral and rotational mobilities, and had a greater fluidizing effect on the outer than the inner monolayer. These effects of DMPEt on liposomes may be responsible for some, but not all, of the general anesthetic actions of ethanol.

• Korean Journal of Food Science and Technology
• /
• v.35 no.2
• /
• pp.211-216
• /
• 2003

Absorption characteristics of hot air-. vacuum-, and freeze-dried ginger powder were investigated. Monolayer moisture content as determined by GAB equation was $0.257{\sim}0.540\;H_2O/g$, showing higher significance than BET equation. Absorption enthalpy was calculated based on different drying methods and water activities. Absorption energy decreased with increasing water activity but was not affected by drying method. Isotherm curves showed a typical sigmoid form. Among models applied for predicting equilibrium moisture content, Caurie model was the best fit model for ginger powder, showing the lowest prediction deviation of $1.2{\sim}5.4%$, followed by Henderson then Bradley models. The prediction model equations for the moisture content were established by in(time), water activity, and temperature.

• Weed & Turfgrass Science
• /
• v.4 no.2
• /
• pp.111-117
• /
• 2015

The equilibrium moisture contents (EMC) in seeds of four Echinochloa (E. crus-galli var. crus-galli, E. crus-galli var, echinata, E. crus-galli var. praticola, E. esculenta) were measured at $20^{\circ}C$ with equilibration over a series of lithium chloride solutions with relative humidities ranging from 0.11 to 0.8 to determine sorption isotherms and safe storage relative humidity. Standard seed sorption isotherm models i.e. modified Henderson, modified Chung-Pfost, modified Halsey, modified Oswin and Guggenheim-Anderson-deBoer (GAB) equations were adopted to evaluate the goodness of fit to sorption isotherms. This study indicated that EMC of seeds was significantly different in four Echinochloa species at various relative humidity. The modified Oswin equations for E. crus-galli var. crou-galli, E. crus-galli var, echinata, E. esculenta and GAB equation for E. crus-galli var. praticola were adequate models for the EMC data. Seeds of four Echinochloa species have monolayer moisture contents when stored at RH < 0.1. These results show that seed moisture isotherm model should be selected according to genetic variation.

• KSBB Journal
• /
• v.22 no.6
• /
• pp.433-437
• /
• 2007

A constant desire has been to fabricate nanopatterns for biochip and the Ultraviolet-nano imprint lithography (UV-NIL) is promising technology especially compared with thermal type in view of cost effectiveness. By using this method, nano-scale to micro-scale structures also called nanopore structures can be fabricated on large scale gold plate at normal conditions such as room temperature or low pressure which is not possible in thermal type lithography. One of the most important methods in fabricating biochips, immobilizing, was processed successfully by using this technology. That means immobilizing proteins only on the nanopore structures based on gold, not on hardened resin by UV is now possible by utilizing this method. So this selective nano-patterning process of protein can be useful method fabricating nanoscale protein chip.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.1
• /
• pp.16-19
• /
• 2006

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR characteristic of self-assembled 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto $pre-treatment(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1 mM/1 solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a 0.1 ${\mu}M/l$ solution of 4.4'-di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2,$ and finally blown dry with N_2. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2 V to +2 V with 298 K temperature. The vacuum condition was $6{\time}10^{-8}$ Torr. As a result, we found the NDR voltage of the 4,4'-di(ethynylphenyl)-2'-nitro-1-benzenethiolate were $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ V(positive region). respectively.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1844-1846
• /
• 2005

The characteristic of negative differential resistance(NDR) is decreased current when the applied voltage is increased. The NDR is potentially very useful in molecular electronics device schemes. Here, we investigated the NDR property of self-assembled 4,4- Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene, which has been well known as a conducting molecule. Self-assembly monolayers(SAMs) were prepared on Au(111), which had been thermally deposited onto pre-treatment$(H_2SO_4:H_2O_2=3:1)$ Si. The Au substrate was exposed to a 1mM/l solution of 1-dodecanethiol in ethanol for 24 hours to form a monolayer. After thorough rinsing the sample, it was exposed to a $0.1{\mu}M/l$ solution of 4,4-Di(ethynylphenyl)-2'-nitro-1-(thioacetyl)benzene in dimethylformamide(DMF) for 30 min and kept in the dark during immersion to avoid photo-oxidation. After the assembly, the samples were removed from the solutions, rinsed thoroughly with methanol, acetone, and $CH_2Cl_2$, and finally blown dry with $N_2$. Under these conditions, we measured electrical properties of self-assembly monolayers(SAMs) using ultra high vacuum scanning tunneling microscopy(UHV-STM). The applied voltages were from -2V to +2V with 299K temperature. The vacuum condition is $6{\times}10^{-8}$ Torr. As a result, we found the NDR voltage of the nitro-benzene is $-1.61{\pm}0.26$ V(negative region) and $1.84{\pm}0.33$ (positive region), respectively.

• Journal of Sensor Science and Technology
• /
• v.19 no.4
• /
• pp.306-312
• /
• 2010

We have detected deoxynivalenol(DON) using a metal-oxide-semiconductor field-effect-transistor(MOSFET)-based biosensor. The MOSFET-based biosensor is fabricated by a standard complementary metal-oxide-semiconductor(CMOS) process, and the biosensor's electrical characteristics were investigated. The output of the sensor was stabilized by employing a reference electrode that applies a fixed bias to the gate. Au which has a chemical affinity for thiol was used as the gate metal to immobilize a self-assembled monolayer(SAM) made of 16-mercaptohexadecanoic acid(MHDA). The SAM was used to immobilize anti-deoxynivalenol antibody. The carboxyl group of the SAM was bound to the anti- deoxynivalenol antibody. Anti-deoxynivalenol antibody and deoxynivalenol were bound by an antigen-antibody reaction. In this study, it is confirmed that the MOSFET-based biosensor can detect deoxynivalenol at concentrations as low as 0.1 ${\mu}g$/ml. The measurements were performed in phosphate buffered saline(PBS; pH 7.4) solution. To verify the interaction among the SAM, antibody, and antigen, surface plasmon resonance(SPR) measurements were performed.

• Journal of Pharmaceutical Investigation
• /
• v.34 no.6
• /
• pp.483-489
• /
• 2004

Fexofenadine HCl is non-sedating histamine H1 receptor antagonist that can be used for the treatment of seasonal allergic rhinitis. The objective of this study was to investigate whether the carriers of deformable liposomes can enhance the transepithelial permeability of fexofenadine HCl across the in vitro ALI human nasal monolayer model. Characterization of this model was achieved by bioelectric measurements and morphological studies. The passage 2 and 3 of cell monolayers exhibited the TEER value of $2852\;{\pm}\;482\;ohm\;{\times}\;cm^2$ on 11 days of seeding and maintained high TEER value for 5 days. The deformable liposome of fexofenadine HCl was prepared with phosphatidylcholine (PC) and cholic acid using extruder method. The mean particle size was about 200 nm and the maximum entrapment efficiency of 33.0% was obtained in the formulation of 1% PC and $100\;{\mu}g/ml$ fexofenadine HCl. The toxicity of the deformable liposome to human nasal monolayers was evaluated by MTT assay and TEER value change. MTT assay showed that it has no toxic effect on the nasal epithelial cells in 2-hour incubation when the PC concentration was below 1%. However, deformable liposome could not enhance the transepithelial permeability $(P_{app})$ and cellular uptake of fexofenadine HCl. In conclusion, the in vitro model could be used in nasal drug transport studies and evaluation of transepithelial permeability of formulations.

• Journal of Embryo Transfer
• /
• v.9 no.1
• /
• pp.117-125
• /
• 1994

In vitro development of parthenogenetic embryo was examined after ethanol treatment of follicular oocytes matured in vitro for 42, 48, 54 and 60h in the pig. The follicular oocytes were matured in TCM 199 containing 15% FCS and gonadotrophins in an atmosphere of 39 $^{\circ}C$ 5% $CO_2$. The cumulus-free oocytes were activated by 10% ethanol treatment in M2+4mg /ml BSA for 10 min. The ethanol-activated oocytes were washed and further cultured in TCM199+20%FCS containing granulosa cell monolayer. Maturation rates at 42, 48, 54 and 60h of IVM were 75.0, 86.5, 81.6 and 87.9%, respectively. Thus the oocytes maturated in vitro for longer periods did not improve nuclear maturation much. Pronuclear formation rates at 18h post-activation in ethanol-activated oocytes were 21.9, 25.0, 47.4 and 32.6%. The cytoplasmic maturation leading to pronuclear formation upon activation increased when the I VM period was extended from 42 to 54h. When the activated oocytes were cultured for 96~120h to analyse early development of the activated oocytes, the rates of embryonic development upto $\leq$ 5~8 cell were 5.3, 5.8, 12.0 and 11.7% among the cultured embryos. The result indicate that earlier development of activated porcine occyte is dependent on the duration of oocyte maturation, and that better development could be obtained from the oocyte matured for 54h.