• 한국안전학회지
• /
• 제33권2호
• /
• pp.28-31
• /
• 2018

In display and semi-conductor manufacturing process, there are numerous unstable factors such as particle concentration, minimal vibration, changes in magnetic field, or electrostatic that becomes an issue to be managed and controlled. In the recent, X-ray ionization is widely used that is neutralized by separating air or gas molecules in the area where the static must be resolved. The mono-type of X-ray ionizer was not capable to be used in $8^{th}$ generation panels manufacturing plant due to its insufficient ionizing coverage since the panel itself is approximately in $2m{\times}3m$. To resolve the current problem, the development of new type called, "Multi-type X-ray ionizer" has resulted in covering enough ionizing space in $8^{th}$ generation panels industry. Comparing mono and multi types with MCNPX code simulation, the multi one indicates more X-ray flux, efficiency, and ionization performance in comparison with either a mono-type or multi-type in array format. In addition, the ionizing efficiency of overlapping area with multi-type showed 30% higher effectiveness rate as to the ordinary mono-type.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.210-210
• /
• 2009

This paper describes the analysis results of an generated power with a inclined solar radiation. 2 different types of modules were employed to study the effect of the a inclined solar radiation on the generated power amount. As a result, it was confirmed that the generated power increased with the solar radiation and the mono crystal type cells generated higher power than the thin film type cells.

• 한국환경복원기술학회지
• /
• 제7권3호
• /
• pp.35-47
• /
• 2004

In order to study changes in vegetation pursuant to rooftop revegetation plantation methods, plantation methods for rooftop revegetation were divided into two types through an analysis of recent trends. Then, Planted plants and invasive plants on sites where the planting methods were introduced were monitored. Planting methods were divided into mono-layer meadow cover type and multi-layer planting cover type. They showed some differences in terms of the availability of wetland, the structure of vegetation layers, the planted species, and the material of mulching. According to the results of monitoring the two sample sites for different plantation methods, the number of invasive plants was higher in multi-layer planting cover type and the ratio of naturalized plants was higher by 30% in average in mono-layer meadow cover type. The main reason for such a result is that the natural soil used in the multi-layer planting cover type likely contained some seeds. Moreover, it's harder for invasive plant seeds to germinate in volcanic rocks than in natural soil. Also, it is attributable to wetlands available in multi-layer planting cover type and diverse living environments created by multi-layer planting. The reason of the ratio of naturalized plants being higher by at least 10% in mono-layer meadow cover type is the character of naturalized plants being stronger in unfavorable conditions than nature plants are. Accordingly, the germination rate in the volcanic rock mulching has likely contributed in raising the introduction and germination of naturalized plants. The results showed that multi-layer planting cover type using wetland creation and nature soil can increase the number of invasive plants and lower the ratio of naturalized plants. However, since seeds contained in the natural soil can affect the growth of planted plants, this needs to be clarified, It was judged that mono-layer meadow cover type may affect more greatly on the germination and growth of invasive plants than on those of planted plants, Its potential adoption in highly urbanized areas was examined. By complementing with the mutual benefits of each plantation method, it appeared possible to shift to a rooftop revegetation system suitable to the site.

• 자원리싸이클링
• /
• 제18권3호
• /
• pp.62-68
• /
• 2009

마그네슘 용융염 전해시 적정 조업조건을 확립하고자 자체 설계 제작한 150A급 mono-polar형 전해조를 사용하여 24시간 연속 전해 조업을 수행하였다. $MgCl_2$ 25%, NaCl 55%, $CaCl_2$ 19%, $CaF_2$ 1%의 전해욕 조성으로 전해온도 $720{\sim}740^{\circ}C$, 전해전압 7V, 음극 전류 밀도 $0.7-0.75A/cm^2$, 전극 간격 6cm의 운전조건에서 24시간 연속 조업을 수행하였으며, 전해 전압 및 전류 변화, 전해 욕 조성 변화, 전류 효율 등을 조사하였다. 시험결과 제작한 전해셀의 조업성이 양호하였으며, 순도 99% 이상의 금속 마그네슘을 회수하였고 전류효율 89%를 달성할 수 있었다. 본 연구를 통하여 마그네슘 용융염 전해장치 제작에 필요한 기초자료를 축적할 수 있었다.

• 한국작물학회지
• /
• 제44권3호
• /
• pp.197-200
• /
• 1999

In order to get abundant germplasm for develop- ing new corn varieties, major morphological characteristics of ear were evaluated with a total of 210 Korean indigenous maize lines collected from various parts of Pusan City and Kyungnam Province, Korea. The ear shape of Korean indigenous maize was mainly cone type or similar to cone type. Cylinder type or similar to cylinder type of corn was collected from the north-west mountainous. region of Kyungnam Province, whereas cone type or similar to cone type was collected from the plain region. In the kernel colors of each ear, ears with mono colored kernels were 55.7% of the total, and ears with two to four mixed colors were 44.3%. Among the mono colored ears, brown was the most abundant at 16.8%. There was an average of 12∼14 rows per ear. Kernal rows per ear varied from 8∼20. Waxy corn was predominant at 67.2%, mixed corn with waxy kernel and common kernel at 11.0%, and common corn at 21.8%.

• 대한인간공학회지
• /
• 제14권1호
• /
• pp.37-57
• /
• 1995

The purpose of this study was to investigate the elastic effect of deformation and restriction in wearing a support type panty stocking (PS). The study investigated deformation rate in all surface area, deformation rate in local area, length deformation rate, changes in slip and feeling of restriction under the standard laboratory condition. Two healthy adult females in twenties wore four types of PS. The result were as follows : The deformation rate in all surface area was 117 .approx. 132% in wearing support type PS, 157% in wearing mono type PS, due to the intensities of restriction. The deformation rate in local area was in order, course > oblique > wale direction. The largest deformation rate was observed in hip girth. Between the deformation rates in all surface and local areas was a high correlation acknowledged, especially the course direction showed a high correlation. Support type PSs showed more deformation and changes of slip than wool and mono type PS. Especially, changes of slip at the knee appeared greatly. The responses of restriction evaluated from a paired comparison method were in order, JS 2 > KS 4 > KS 9 > KS 5 > KS 1 > KM 3.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.203-209
• /
• 2017

양이온계 광중합에 적용 가능한 propenyl ether 형태의 단량체들을 mono 및 di-functional alcohol과 allyl bromide의 축합반응으로 합성하였다. 이들 단량체들을 양이온 광개시제와 혼용하여 코팅조성물을 제조하여 광경화 반응성을 조사하였다. 그 결과 mono propenyl ether 형태인((prop-1-en-1-yloxy)methyl)benzene (POMB)는 dipropenyl ether 계인 1,4-bis(prop-1-en-1-yloxy) benzene (BPOB) 비교하여 초기 중합 속도는 10.2로 상대적으로 낮게 나타났으나 1.5mol%의 광개시제를 포합한 배합물에서는 90초이내에 거의 정량적으로 반응하였다. 또한 긴알킬기를 갖는 술폰산 염계 광개시제들은 단량체들에 빠른 용해 특성을 나타내었고 산성도가 높은 광개시제인(4-n-decyloxyphenyl)diphenylsulfonium hexafluoroantimonate(DPSA)와 (4-n-decyloxyphenyl) diphenylsulfonium triflate (DPST)를 사용한 경우 비교적 높은 중합속도와 전환율을 나타내었다.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권3호
• /
• pp.225-242
• /
• 2016

The phase-type representation is strongly connected with the positive realization in positive system. We attempt to transform phase-type representation into sparse mono-cyclic positive representation with as low order as possible. Because equivalent positive representations of a given phase-type distribution are non-unique, it is important to find a simple sparse positive representation with lower order that leads to more effective use in applications. A Hypo-Feedback-Coxian Block (HFCB) representation is a good candidate for a simple sparse representation. Our objective is to find an HFCB representation with possibly lower order, including all the eigenvalues of the original generator. We introduce an efficient nonlinear optimization method for computing an HFCB representation from a given phase-type representation. We discuss numerical problems encountered when finding efficiently a stable solution of the nonlinear constrained optimization problem. Numerical simulations are performed to show the effectiveness of the proposed algorithm.

• 분석과학
• /
• 제24권6호
• /
• pp.421-428
• /
• 2011

본 연구에서는 시료상층부 원판 형태 흡탈착 추출법(HS-MMSE)을 개발하여 검증하고 바닐라 향수의 휘발성 아로마 성분들의 기체 크로마토그래피-질량 분석법에 적용하였다. HS-MMSE 방법은 실리카에 octadecyl silane (ODS)과 활성탄을 결합하여 만든 단일 다공성 물질(monolithic material, MonoTrap)을 흡착제로 이용한다. MonoTrap은 시료상층부에서 아로마 성분들을 흡착하고 100 ${\mu}L$ 소량의 용매로 추출한다. HS-MMSE를 이용하여 바닐라 향수로부터 12개의 성분들을 성공적으로 분석하였다. 그 중 benzyl acetate, linalyl acetate, vanillin, ethyl vanillin을 이용하여 추출 효율에 영향을 주는 파라미터들에 대한 실험을 통해 추출 조건을 최적화하였다. 또한, 대상 물질들에 대한 분석 방법의 검증 실험을 진행하였다. 그 결과, 검출한계, 정량한계는 각각 8.35~13.76 ng, 27.82~45.88 ng 범위였고 $r^2$값이 0.9888 이상인 우수한 직선성과 양호한 회수율 및 재현성을 얻었다. 이러한 결과들을 바탕으로 원판 형태 MonoTrap을 이용한 HS-MMSE 방법은 바닐라 향수의 휘발성 아로마 성분들을 분석하는데 효과적인 방법임을 확인하였다.

• 공업화학
• /
• 제20권2호
• /
• pp.140-144
• /
• 2009

본 연구는 트리에탄올아민형 양이온 계면활성제(TEA-EQ)의 합성과 그 응용에 관한 것으로, 지방산과 트리에탄올아민의 특정 몰비와 반응온도에 따라 트리에탄올형 양이온 계면활성제의 mono, di, tri 구조가 다르게 합성되는 것을 알 수 있었고, 분석은 NMR로 해석하였다. 안정성은 섬유유연제에 적용한 후, 각각 $45^{\circ}C$에서 4개월간 상안정성을 육안으로 확인하였다. 장기안정성은 Tri-TEA-EQ 함량이 증가할수록 감소하였고 Mono-TEA-EQ 함량이 많을수록 증가하였다. 또한 지방산의 종류에 따른 유연력 및 흡수력을 평가하였는데, 포화지방산이 증가할수록 유연력이 증가하고, 불포화지방산이 많을수록 흡수력이 증가하는 현상을 보였다. 유연력 평가는 일반 가정용 수건의 터치감을 이용한 관능평가로 실시하였으며 흡수력은 유연제 처리 후 흡수되는 물의 높이로 측정하였다.