• Design & Manufacturing
• /
• 제12권3호
• /
• pp.55-59
• /
• 2018

In a multi-cavity mold having a runner layout of a fish bone structure, problems of unbalanced filling between cavities occur constantly. Unbalanced charging lowers the dimensional accuracy of a molded article and causes deformation after molding. To solve this problem, the gate size connected to each cavity is adjusted using the BGV (Balanced Gate Value) equation. In this paper, in order to solve the filling imbalance problem of the runner layout mold of fish bone structure through injection molding analysis study, we compared the charging imbalance phenomenon before and after improvement after adjusting the gate size by applying BGV equation. From the results of the molding analysis, the shrinkage ratio before and after the improvement of the molded article was improved by only about 0.08%. Based on these results, it was confirmed that the charging imbalance problem was not significantly improved even when the BGV equation was applied.

• Design & Manufacturing
• /
• 제11권1호
• /
• pp.30-33
• /
• 2017

In this study, the mold technology for manufacturing of porous implant was investigated. Firstly, we considered the concept of insert molding technology with 3D printing of porous inert part. The part on implant was designed in the end region of the implant. And then main implant bodies were manufactured using conventional machining method. The other porous parts were designed and optimized with molding simulation. As the feature size of porous implant was so small that perfect feature of it using 3D printing technology could not be obtained. So, we proposed another scheme for manufacturing of the porous implant in the replace of the former approach. Polymer mold cores with 3D printing technology were considered. The effects of addictive manufacturing process parameters on the properties of mechanical and dimensional accuracy were investigated. Direct 3D printed polymer mold cores were designed and manufactured under the simulation of thermal and molding analysis. It was shown that 3D printed mold core with polymer could be adapted to the injection molding for porous implant.

• 한국정밀공학회지
• /
• 제18권3호
• /
• pp.75-83
• /
• 2001

RIM(Reaction Injection Molding) is a widely used method to manufacture middle-large size outfit-part for a prototype car. The main advantage of RIM is the capability of manufacturing a small number of prototype parts with less cost and lead time than injection molding which is the most popular method to manufacture plastic parts. Generally, epoxy resin and RTV(Room Temperature Vulcanization) silicon are used as mold materials for RIM, and the selection of mold materials is usually depended upon the industrial environment of manufactures and it decides overall mold making process and part quality. This paper suggests a new mold making process by consolidating the advantages of epoxy resin and RTV silicon based RIM mold to enhance the parts quality while reducing the manufacturing cost and time and shows the competitiveness of the suggested process compared with conventional methods.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.331-338
• /
• 2021

Ti-Al-Si target and Cr-Si target are sputtered alternately to develop a multi-layered nitride coating on a steel mold to improve die-casting lifetime. Prior to the multi-layer deposition, a CrN layer is developed as a buffer layer on the mold to suppress the diffusion of reactive elements and enhance the cohesive strength of the multi-layer deposition. Approximately 50 nm CrSiN and TiAlSiN layers are deposited layer by layer, and form about three ㎛-thickness of multi-layered coating. From the observation of the uncoated and coated steel molds after the acceleration experiment of liquid metal injection casting, the uncoated mold is severely eroded by the adhesion of molten metallic glass. On the other hand, the multi-layer coating on the mold prevents element diffusion from the metallic glass and mold erosion during the experiment. The multi-layer structure of the coating transforms the nano-composite structured coating during the acceleration test. Since the nano-composite structure disrupts element diffusion to molten metallic glass, despite microstructure changes, the coating is not eroded by the 1,050 ℃ molten metallic glass.

• 한국산학기술학회논문지
• /
• 제9권6호
• /
• pp.1754-1759
• /
• 2008

일반사출성형에서는 수지가 캐비티 내를 흐르면서 냉각으로 인한 점도의 상승으로 전사성이 급격히 나빠지기 때문에 미세패턴을 가진 성형품을 제작하는데 많은 어려움이 따른다. 이를 해결하는 방법으로 금형온도를 용융된 수지온도 수준까지 순간적으로 표면만을 가열하여 성형시킨 후 급속히 냉각하는 다양한 순간금형가열방식이 있고, 그 중 본 연구에서는 전열가열방식인 E-Mold을 채택하였다. 특히, 마이크/나노 부품 성형에 필수적인 E-Mold 금형설계에 있어 heating line의 배치는 금형의 온도 제어 및 균일한 온도 분포에 절대적인 영향을 미치므로 최적화된 heating line의 배치가 필수적이다. 본 연구에서는 사출공정의 사이클 타임을 최소화하면서 다양한 해석 프로그램을 사용하여 E-Mold의 최적화 설계를 전산모사 하였고, 이를 실험결과와 비교하였다. 먼저, 3D CAD 프로그램인 Pro-Engineer Wildfire 2.0 을 사용하여 E-Mold 금형을 설계하고, ANSYS사의 ICEMCFD 프로그램을 사용하여 MESH 생성하고, ANSYS사의 FLUENT 프로그램을 사용하여 금형의 초기온도 $60^{\circ}C$에서 $120^{\circ}C$와 $180^{\circ}C$까지 가열하는데 걸리는 시간과 냉각시키는데 걸리는 시간 등을 전산모사 하였다. 그리고 Polycarbonate를 이용하여 LGP 도광판을 실제 사출성형하여 얻은 데이터와 비교 분석을 하였다. 전산모사와 실제 사출결과에서 $3{\sim}4$초가량의 차이가 나타났지만 실제 사출시 고온의 용융된 플라스틱 수지에 따른 냉각시간의 오차를 생각한다면, 전산모사와 실힘결과는 거의 일치한다고 볼 수 있다. 따라서 본 체계적인 전산모사방법을 통해 E-Mold의 Heating Line 최적화 설계가 가능하다는 것을 확인하였다.

• Design & Manufacturing
• /
• 제2권1호
• /
• pp.39-43
• /
• 2008

There occur not only many problems in the injection process but also low quality productivity due to the injection conditions of various injection factors. Injection molding process factors such as molding temperature, injection pressure, flow rate and flow velocity, must be controlled properly in filling and packing phases in the injection molding process. In this study, effects of these factors on the injection molding were investigated through the flow analysis for the holding pressure affecting cooling time. Results of this study would be helpful to setting of holding pressure for optimization of forming condition in order to reduce cooling time in injection molding.

• 한국융합학회논문지
• /
• 제11권11호
• /
• pp.211-217
• /
• 2020

일반적으로 금형은 소재 부품 분야에서 제품의 대량 생산에 널리 이용되는 중요한 생산 도구이다. 그러나 최근 다품종 소량생산의 확산에 따라 보다 효율적이고 경제적인 금형에 대한 요구가 증가하고 있으며, 본 연구에서는 금형 재료로서 초고강도 콘크리트의 적용 가능성을 모색해 보고자 한다. 초고강도 콘크리트는 80MPa 이상의 압축강도를 갖는 콘크리트로서 금속에 비해 저렴하고 무게가 가벼우며 조형이 용이하다는 장점을 가지고 있다. 초고강도 콘크리트가 비록 일반 금형 재료인 공구강에 비해 강도는 낮지만 상대적으로 낮은 응력이 발생하는 성형 공정에 사용된다면 금형 재료로서 충분히 활용 가능하다고 판단하였다. 따라서 본 연구에서는 플라스틱 저압 생산공정의 하나인 폴리우레탄 반응사출 성형공정용 시작 금형에 초고강도 콘크리트를 적용해 보았으며, 금형 제작 및 성형 과정을 통하여 금형 소재로서의 가능성과 특징을 고찰해 보았다.

• 소성∙가공
• /
• 제18권2호
• /
• pp.177-182
• /
• 2009

A work of thin-walled outsell injection molding technology for a plastic part of moldframe applicable in a display product was performed in the present study. The thin-walled plastic part is one of the core parts in the display product, which supports and protects a light guide plate and back light unit from external environmental conditions. It globally has the shape of rectangular and surrounds the light guide plate and back light unit for each class of inch, however, the cross section of the part is not clear to define the thickness. This causes the difficult problem of injection molding itself for the part. Moreover, a metal outsell part makes a difficult problem in injection molding over it. Because the mold temperature control of the parts are not uniform in thickness direction due to the metal part. A careful injection melding analysis and injection mold design from the analysis results have to be proceeded to obtain a production of precision moldframe. Therefore, optimization for injection molding process and analysis of warpage characteristics were studied. Consequently, it was possible from the presented virtual manufacturing process that the manufacturing of precision thin-walled outsell moldframe.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2001년도 춘계학술대회 논문집(한국공작기계학회)
• /
• pp.269-274
• /
• 2001

This research covers the development of new technique for composite injection molding of high stiffness Sabot. An analysis of polymer resin is performed by means of making test specimen mold and doing test with accordance of ASTM test guidelines. Structural analysis and simulation of injection molding process are carried out in order not only to estimate but also to predict the characteristics of molding stresses what both product and structure of mold may have. For structural analysis software, Moldflow and LS-dyna are used and universal test machine is utilized for evaluating performance of sabot. Cases of adopting this material to sabot are not announced yet in domestic academic world. In addition to that, materials for polymer-metal mixed injection molding are imported on the whole due to deficient level of domestic technology. Therefore, this new developed injection molding technique using PEI material can make it available to ensure the technology of making mold, injection and design. Finally, this technique may be applicable to another sabot having different radius of warheads from now on.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.210-221
• /
• 2000

Plastic mold designers and frequently faced with optimizing multi-quality issues in injection molded parts. These issues are usually in conflict with each other and thus tradeoff needs to be made to reach a final compromised solution. in this study an automated injection molding design methodology has been developed to optimize multi-quality characteristics of injection molded parts. The features of the proposed methodology are as follows : first utility theory is applied to transform the original multi-objective problem into single-objective problem. Second is an implementation of a direct search-based injection molding optimization procedure with automated consideration of robustness against process variation. The modified complex method is used as a general optimization tool in this study. The developed methodology was applied to an actual mold design and the results showed that the methodology was useful through the CAE simulation using a commercial injection molding software package. Applied to production this study will be of immense value to companies in reducing the product development time and enhancing the product quality.