Browse > Article

Verification of gate balancing equation using injection molding analysis  

Han, Seong-Ryeol (Department of Metalmold Design Engineering, Kongju National University)
Publication Information
Design & Manufacturing / v.12, no.3, 2018 , pp. 55-59 More about this Journal
Abstract
In a multi-cavity mold having a runner layout of a fish bone structure, problems of unbalanced filling between cavities occur constantly. Unbalanced charging lowers the dimensional accuracy of a molded article and causes deformation after molding. To solve this problem, the gate size connected to each cavity is adjusted using the BGV (Balanced Gate Value) equation. In this paper, in order to solve the filling imbalance problem of the runner layout mold of fish bone structure through injection molding analysis study, we compared the charging imbalance phenomenon before and after improvement after adjusting the gate size by applying BGV equation. From the results of the molding analysis, the shrinkage ratio before and after the improvement of the molded article was improved by only about 0.08%. Based on these results, it was confirmed that the charging imbalance problem was not significantly improved even when the BGV equation was applied.
Keywords
Analysis; Balanced gate value(BGV); Filling imbalance; Gate; Injection molding;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Kang, C.M. and Jeong, Y.D., "Effects of Processing Factors on Filling Imbalances in Multi-cavity Injection Mold", Proceedings of the Korean Society for Technology of Plasticity 2004 Autumn Conference, pp. 54-57, 2004.
2 Beaumont, J.P. and Young, J.H., "Mold Filling Imbalances in Geometrically Balanced Runner systems.", Journal of Injection Molding Technology, vol 1, No. 3, pp. 133-135, 1997.
3 Kwon, Y.S. and Jeong, Y.D., "Optimization of Processing on Filling Balance of the HR3P Mold Structure", Vol. 26, No. 3, pp. 98-102, 2009.
4 Je, D.K. and Jeong, Y.D., "Filling Imbalance in 3 plate Type Injection Molds with Multi-Cavity", Vol. 21, No. 6, pp. 117-121, 2004.
5 Jeong, Y.D. and Jang, M.K., "A New Runner System Melt-Buffer for Filling Balance in Injection Mold", Vol. 18, No. 2, pp. 122-127, 2009.
6 Lim S.H., "Injection Mold Design", Boseongkak, pp. 173-175, 2011.
7 Beaumont, J.P., "Runner and Gating Design Handbook", Hanser, pp. 142-143, 2004.
8 Han, S.R., "A Study on the Deformation Optimization of a Plastic Bezel Assembled on the Steering Wheel of an Automobiles", Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 5, pp. 105-112, 2017.   DOI
9 Wang, M.L., Chang, R.Y. and Hsu, C.H., "Molding Simulation Theory and Practice", Hanser, pp. 220-224, 2018.