• The Journal of Pediatrics of Korean Medicine
• /
• v.16 no.2
• /
• pp.171-185
• /
• 2002

Objectives : The purpose of this study was to investigate the spine distortion and self-conscious pain in high school students. Method : Using the phase-shifting moire developed by KAIST(Korea Advanced Institute of Science and Technology) we measured the back surface distortion, and using questionnaire investigation, we investigated the self-conscious pain in 30 high school students(17 boy students and 13 girl students). Results : This study show that low back pain was most cases, and next headache, upper back pain, abdominal pain, neck pain, shoulder pain, leg pain, chest pain and gluteal pain. The ratio of each self-conscious pain was 90.0%, 86.7%, 83.3%, 83.3%, 80.0%, 76.7%, 66.7%, 33.3%, 33.3%, 30.0%. In remainder value of left and right shoulder, above of 3.0 were three students., above 2.0 to bellow 3.0 were 10 students, bellow 2.0 were 17 students. In remainder value of left and right gluteal, above of 2.0 was one students, above 1.0 to bellow 2.0 were 18 students, bellow 1.0 were 10 students. In remainder value of cervical vertical line to left and right axillae, above 4.0 was 1 student, above 3.0 to bellow 2.0 were 2 students, above 2.0 to bellow 3.0 were 3 students, above 1.0 to bellow 2.0 were 16 students, bellow 1.0 were 7 students. In remainder value of gluteal vertical line to left and right axillae, above 6.0 was 1 student, above 5.0 to bellow 6.0 were 7 students, above 4.0 to bellow 5.0 were 3 students, above 3.0 to bellow 4.0 were 2 students, above 2.0 to bellow 3.0 were 5 students, above 1.0 to bellow 2.0 were 7 students, bellow 1.0 were 5 students. In remainder value of cervical vertical line to gluteal vertical line, above 40 was 1 student, above 3.0 to bellow 4.0 were 4 students, above 3.0 to bellow 3.0 were 6 students, above 1.0 to bellow 2.0 were 8 students, bellow 1.0 were 11 students. Conclusion : It is suggested that the significant correlation exist between the spinal distortion and self-conscious pain. And we can find many cases as spinal distortion in high school students also. We have to study further more about juvenile postural distortion and it's prevention.

• The Journal of Korean Physical Therapy
• /
• v.15 no.4
• /
• pp.112-128
• /
• 2003

Since areas of pain and dysfunction of musculoskeletal typically suffered by the patients with back disorders spread all over the body, WBIP(GCM Program) for the primary treatment and management is required. The purpose of this study is to analyze if WBIP(GCM Program) based on the hyper/hypomobility pattern of Four Body Types can identify the effective treatment of back disorders and the effect on the postural balanced restoration of the spine and extremities. Non-specific back disorder is still a major reason for sick leave. And moreover, its been reported that there was often recurrence to the patients whose symptom had been diminished. As a WBIP(GCM Program) based on kinematic chain patterns of Four Body Types, this study gave a new information on the effective diagnosis, treatment and management of non-specific back disorders. 337 patients above the twenty-five years old with the non-specific back disorders at the hospital and oriental medical clinics at Kyungnam and Busan areas in South Korea from August 24th, 2000 to Feb 23rd, 2001 have randomly been assigned to four experimental groups such as Whole Body Intervention Program Group, Physical Therapy Group like modality treatments, Acupuncture-Treatment Group, and Placebo Control Group. According to intervention program applied to the each four group for three times per week(twelve times per 4weeks), as the time-series methods, we compared and evaluated the body status of the pretest with that of post treatment completion of four week, three month, and six month, respectively. As the analytical method of measurement, our researchers used the Moire Interferometry Unit and Postural Kit that could measure the postural balance of spine and extremities. The collection of data was performed in the designated hospital and oriental medical clinics. For the analysis of the data, the SPSS 10.0 package program was used. X2-test has been taken in order to compare and analyze characteristics and GPES of the patients in four experimental groups. Repeated Measure ANOVA and Tukey post hoc test has been adopted in order to compare the effects of the balanced restoration of the spine and extremities among four Groups categorized for this study. Statistical significance was accepted at the 0.05 level of confidence The effect of the balanced restoration on the spine and extremities of the patients with non-specific back disorders has been proved in all of the Groups. As for the restoration degree, however, WBIP(GCM Program) Group produced the highest effectiveness in terms of the fact that it had a dense moire in comparison with the other three Groups and that the Moires of both sides had the same level by the time(p<0.01). WBIP(GCM Program) based on four tilting types of scapular and ilium and hyper/hypomobility pattern took a higher effect on the balanced restoration of the spine and extremities through a whole body as well as the treatment of back disorders than the other three Groups which the usual remedy without classification of body type had been applied to.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.15-19
• /
• 2001

A dedicated reverse engineering(RE) system for rapid manufacturing of human head in a 3D bust has been developed. The first step in the process is to capture the surface details of a human head and shoulder by three scanners based upon the digital moire fringe technique. Then the multiple scans captured from different angles are aligned and merged into a single polygonal mesh, and the aligned data set is refined by smoothing, subdividing or hole filling process. Finally, the refined data set is sent to a 4-axis computer numerically control(NC) machine to manufacture a replica. In this paper, we mainly describe on the algorithms and software for aligning multiple data sets. The method is based on the recently popular Iterative Closest Point(ICP) algorithm that aligns different polygonal meshes into one common coordinate system. The ICP algorithm finds the nearest positions on one scan to a collection of points on the other scan by minimizing the collective distance between different scans. We also integrate some heuristics into the ICP to enhance the aligning process. A typical example is presented to validate the system and further research work is also discussed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.4 s.36
• /
• pp.292-304
• /
• 1990

The surface change of upperarm and shoulder blade area are caused by the extensive upper limb movement, thus it is necessary to measure the amount of change for constructing the clothing. Moire photography was taken after plastic casters of upperarm and shoulder blade area was prepared. 1. For the shoulder blade area, subjects showed the same change of surface area for the various limb positions, wherease, for the upperarm only at the $0^{\circ}\;and\;180^{\circ}$ limb position, same change was observed. 2. As the movement of the upperarm was increased, surface area of axillary part was increased and that of shoulder part was decreased. 3. To make a bodice pattern, the minimum size of the back with the ease were $\frac{B}{4}$+3.13 cm R for normal wear and $\frac{B}{4}$+5.75 cm for active wear. 4. As the movement of the arm was increased, the cross section for the upperarm were changed to elliptical shape. 5. For each horizontal basic line, there was a positive correlation between the amount of change of shoulder blad area and that of upperarm area.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.14 no.2
• /
• pp.101-111
• /
• 1994

Electronic speckle pattern interferometry(ESPI) using a CW laser, a video system and an image processor were applied to the in-plane displacement measurements. Unlike traditional strain gauges or Moire method, ESPI method requires no special surface preparation or attachments and it can be measured in-plane displacement without any contact and real time. In this experiment, specimen was loaded in paralled with a loa cell. The specimen was plance to which strain gauges was attached. The study provides an example of how ESPI have been used to measure displacement and strain distribution in this specimen. The results measured by ESPI were compared with the data which were measured by strain gauge method in tensile testing.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.5
• /
• pp.385-392
• /
• 2016

Recently in the display industry, demands for high-luminance and resolution of display devices have been steadily increasing. Generally, micro linear patterns are applied to an optical film in order to improve its properties of light. However, these patterns are easily viewed to eyes and moire phenomenon can be occurred. Micro random patterns are proposed as a method to solve these problems, increasing light-luminance and light-diffusion. However, conventional pattern manufacturing technologies have long processing times and high costs making it difficult to apply to large area molds. In order to combat this issue, micro-random patterns are formed by using a roll to plate indentation method along with abrasive paper tools composed of AlSiO2, SiC, and diamond grains. Also, forming properties, such as size and fill-factor of random patterns, are analyzed depending on type, mesh of abrasive paper tools, and indentation forces.

• Journal of the Microelectronics and Packaging Society
• /
• v.29 no.3
• /
• pp.43-48
• /
• 2022

In this study, simulation method was developed to improve the accuracy of the warpage simulation based on the equivalent anisotropic viscoelastic model. First, a package with copper traces and bumps was modeled to implement anisotropic viscoelastic behavior. Then, equivalent anisotropic viscoelastic properties and thermal expansion coefficient for the bump region were derived through the representative volume element model. A thermal cycle of 0 to 125 degrees was applied to the package based on the derived mechanical properties, and the warpage according to the thermal cycle was simulated. To verify the simulation results, the actual package was manufactured, and the warpage with respect to the thermal cycle was measured through shadow moiré interferometer. As a result, by applying the equivalent anisotropic viscoelastic model, it was possible to calculate the warpage of the package within 5 ㎛ error and predict the shape of the warpage.

• The Journal of the Korea Contents Association
• /
• v.9 no.4
• /
• pp.189-197
• /
• 2009

A digital image usually has 8 bits of depth basically representing pixel intensity ranging for [0 255]. These pixel range allow 256 step levels of pixel values in the image. Thus the greyscale value for a given image is an integer. When we carry out interpolation of a given image for resizing we have to round the interpolated value to integer which can result in loss of quality on perceived color values. This paper proposes a new method for recovering this loss of information during interpolation process. By using the proposed method the pixels tend to regain more original values which yields better looking images on resizing.

• Journal of the Korean Graphic Arts Communication Society
• /
• v.20 no.2
• /
• pp.31-43
• /
• 2002

Screen printing is a stencil process whereby ink is transferred to the substrate through a stencil supported by a fine fabric mesh. Therefore screen had a tendency to distort and swell, as ink was deposited between the fibers, and were difficult to clean. The tow importance of stencil parameters that affect print quality are stencil thread diameter and the fabric thickness because of their influence on both ink deposit and print definition. Since screen printing inks can be formulated to adhere to almost any surface, and the printing process itself can be handled almost any substrate in a wide variety of shape, screen printing is a very versatile process. The small size pronting is reproduced image used screen printing because the surface of substrates is not suited at screen printing method. In screen printing, the need of high definition printing is gradually increasing according to developing special inks. A conventional haftone, so called AM screening, is simple and easy to implement, but the haftone dot patterns by using this method are not free for the moire fringe. This paper is used densitometry and image analysis to investigate relation with printing according to screen mesh, opening size and resolution of copy in image reproduction used FM screen. We had the good result of dot gain and tone reproduction on the screen printing of high definition using FM screen.

• Journal of the Korean Vacuum Society
• /
• v.22 no.6
• /
• pp.285-290
• /
• 2013

Epitaxial graphene on metal substrates provides excellent platforms to study its atomic and electronic structures, and can be grown either by surface segregation of carbon or by chemical vapor deposition. The growth behaviors of the two methods, however, have not been directly compared each other. Here, we studied domain structures of graphene grown by three different methods, surface segregation, post-annealing with adsorbed ethylene, and high-temperature dose of ethylene, using scanning tunneling microscopy. The first two methods resulted in graphene regions with areas of $100nm^2$, whereas the third method showed large area graphene (> $10^4nm^2$) with regular hexagonal Moire patterns, implying that high-temperature dose of ethylene is preferable for further studies on graphene such as additional growth of organic molecules.