• Korean Journal of Optics and Photonics
• /
• v.11 no.4
• /
• pp.232-238
• /
• 2000

The new collimation testing technique of a white light beam using vernier Moire fringes of two line or circular gratings with different pitches is presented. We can visually measure the defocusing ($\Deltaf$), the divergence angle ($\theta$), and the longitudinal chromatic aberration $(L_{ch})$ of a collimating lens by using the technique. For example, we obtained $\Deltaf$= 21.9 mm and $\theta=0.0038^{\circ}$ for a testing lens with the focallengthf = 120.0 mm and F-number of F/2.4. The longitudinal chromatic aberration $L_{ch}$ of another testing lens withf = 65.0 mm, F/1.6, and the Abbe number V = 64.1 for the incident wavelengths of $\lambda_1=480 nm and \lambda_2=640 nm$ is easily measured by same technique. It is found that the measured value $L_{ch}=1.59mm(\pm0.01mm)$ is well agreed with $L_{ch}=1.58mm(\pm0.01mm)$ obtained by the autofocus method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.8
• /
• pp.5269-5279
• /
• 2014

The cause of defects in the PCB SMT assembly is mostly solder paste deposits. Conventional inspection methods for solder paste deposits suffer from slow speed, low reliability and high cost. Therefore, this paper proposes a method for calculating the height and region of solder paste on PCB using the 3D profiles without measuring the 2D image. The solder paste region is detected by the phase difference in the measurement points and the average phase on the whole surface of PCB. The high reliable height of the solder paste region is computed by the average of the measurement points' phase with repeatability and reliability. The experimental results revealed improvements of 17% in inspection time and 29% repeatability in the height calculation of the solder paste region, resulting in a high speed and less expensive system.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.25 no.3
• /
• pp.150-159
• /
• 2012

Objective : The purpose of this study was to evaluate the effect of korean herbal cosmetics for facial skin elasticity. Methods : We recruited patients and divided them to cosmetics group and control group randomly. We provided korean herbal cosmetics to cosmetics group and subjects in cosmetics group applied the provided cosmetics for 4 weeks. Control group waited and applied cosmetics that had previously used for 4 weeks. We assessed all subjects in 0 week, 2 weeks and 4 weeks. Primary assessment instrument was moire topography photo scale. Second assessment instrument was skin moisture, oiliness and elasticity which assessed with skintouch system v1.0, detox/regeneration questionnaire score and self-evaluating facial wrinkle/looseness score. Result : Moire topography photo scale improved in cosmetics group than control group significantly. Skin moisture and elasticity assessed with skintouch system improved in cosmetics group than control group significantly while skin oiliness assessed with skintouch system have not improved significantly. Detox/regeneration questionnaire score and self-evaluating facial wrinkle/looseness score improved in cosmetics group than control group significantly. Conclusion : Korean herbal cosmetics application might be effective method for facial skin elasticity.

• Journal of the Korea Convergence Society
• /
• v.10 no.2
• /
• pp.7-11
• /
• 2019

Due to diversification and popularization of devices that use rapid transmission, there are many security issues related to radio waves. As the disturbance and interference of the radio wave can cause a direct inconvenience to a life, it is a very important issue. In this paper, as a means to prevent radio disturbance and interference, the projected image of the reference grid and the deformed grid is obtained by measuring the projected $moir{\acute{e}}$ using the white light source, projecting grid and the light source, and a $moir{\acute{e}}$ pattern is generated with an image processing algorithm by applying a phase diagram algorithm, and generated $moir{\acute{e}}$ pattern phase diagram creates a three-dimensional shape. By making an encrypted token using this measured face shape, the transmission of the information through token ring is determined in order to transmit the horizontal transmission having the dynamic security characteristics which includes authentication strength and caller information, etc. And by confirming the uniqueness of the token and by sending and receiving the horizontal transmission using java serialization and deserialization function, a problem solving method is suggested.

• Korean Journal of Construction Engineering and Management
• /
• v.23 no.1
• /
• pp.37-45
• /
• 2022

It is very important to measure the displacement of a structure to evaluate the safety of the structure. This study shows a methodology to measure the displacement to determine the stability of a structure when it is damaged by loads. The methodology used Moiré's phenomenon and was verified through experiments. The experiments utilized pipes to simulate the pipe supports in the construction site and measured the vertical displacement of the Moiré interference patterns according to the horizontal displacement of the pipes. Experiments confirmed that the linear relationship between horizontal displacement of pipes and vertical displacement of Moiré patterns and derive a relational expression. In conclusion, the methodology presented in this work allows us to simultaneously measure a number of vertical members' displacements regardless of distance and determine the safety of the structure.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.443-446
• /
• 2009

In this paper, an accurate ray-tracing based visual analysis method of lenticular 3D liquid liquid crystal display (LCDs) and some analysis results are presented. In the developed method, the geometric optics analysis is performed on the single 3D unit pixel of 3D lenticular LCD. It is shown that the display characteristics of 3D lenticular LCD panels of arbitrary size can be evaluated through the 3D unit pixel analysis. The analysis results of a few representative structures of 3D lenticular LCDs are compared.

• The Transactions of the Korea Information Processing Society
• /
• v.7 no.11S
• /
• pp.3739-3751
• /
• 2000

The remarkable progress of computer graphic and virtual reality fields has increased the need of 3D graphic data for implementing more realistic environments. However, despite this trend, lots of time and labor required to process 3D graphic information extracted still limits its application only to the specific areas. As one proper solution to this problem, 3D scanner acquiring graphic data in short time and new algorithm for a data processinig are often mentioned. In this paper, A method generatinig a virtual object quickly by not zippering range data obtained from 3D moire-scanner is introduced and its effectiveness is examined.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.28 no.11
• /
• pp.1536-1543
• /
• 2004

Garment is made by a 2D pattern and should be fitted to a human body which has 3D characteristics. Therefore, to design a pattern more effectively, the use of 3D information of a human body and the investigation of relationship between the 3D garment and 2D pattern are necessary. In this work, ruled surface method was used to reflect the 3D information of a human body for a pattern design. The images of the brassiere line on the woman's dress form were captured by phase-shifting projection moire system and the 3D information on the design line was obtained. 2D patterns on the various parts of the brassiere were developed directly from the 3D data by the ruled surface method. In addition, design line, the area and the amount of dart were quantified. And then we verify the appropriateness of the ruled surface method to the 2D pattern development by measuring the distribution of the space between women's figure and segmented clothing item. It was found that the ruled surface method is useful to transform the 3D design line to the 2D pattern, if we followed the steps suggested in this paper.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.12
• /
• pp.757-761
• /
• 2017

The computational fourier-transform moire (CFTM) method has been briefly explained and this method was used to perform strain analysis of a misfit dislocation in a strained $Si/Si_{0.55}Ge_{0.45}$ layer. An essential advantage of the CFTM method is that it does not require unwrapping, such that errors due to improper unwrapping can be excluded. The analysis results revealed that the Si layer was grown with tensile stress on $Si_{0.55}Ge_{0.45}$ and lattice constant of the Si layer along the growth direction was 1.9% smaller than that of $Si_{0.55}Ge_{0.45}$. On the other hand, strain of the misfit dislocation in the strained $Si/Si_{0.55}Ge_{0.45}$ layer was maximum at the dislocation core due to an extra half-plane and the $e_{xx}$ and $e_{yy}$ values were positive and negative, respectively, along the direction of a burgers vector.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.19 no.3
• /
• pp.670-679
• /
• 1995

This paper presents the 3-D profile measurement system of live human faces, which was developed specially for 'KUMDORI sculptor robot' of the '93 Taejon Exposition. '93 Taejon EXPO. The basic principle for measurement adopts the slit beam projection which is a method of measuring 3-D surface profiles using geometric optics between the slit beam and the CCD camera. Since the slit beam projection consumes long measuring time, it is unfit to measure the 3-D profiles of living objects as human. Therefore, the projection type slit beam method which consumes short measuring time is newly suggested. And an algorithm to reconstruct the 3-D profile from the deformed images using finite approximated calibration is suggested and practically implemented. The projection type slit beam method was applied to spectators in a period of '93 Taejon EXPO. The measurement results show that the technique is suitable for 3-D face profile measurement on a living body.