• 한국지반신소재학회논문집
• /
• 제9권3호
• /
• pp.19-27
• /
• 2010

본 연구에서는 제주도 현무암에 대한 삼축압축시험을 실시하고 Lade(1977)의 3차원 파괴규준을 적용하여 강도정수를 산정하였다. 그리고 3차원 파괴규준에 의해 산정된 강도정수와 파괴면의 특성을 살펴보고, Mohr-Coulomb의 파괴규준으로 산정한 전단강도정수와 비교검토하였다. 삼축압축시험결과를 토대로 Lade(1977)의 3차원 파괴규준을 이용하여 파괴시의 ($I_1^3/I_3-27$)과 ($P_a/I_1$) 관계로부터 매개변수인 ${\eta}_1$ 및 m을 구하였다. 3차원 파괴면을 나타내는 정팔면체 평면에서 조면암질 현무암의 파괴면이 가장 크고 스코리아가 가장 작으며, 단면형상은 조면암질 현무암이 가장 삼각형에 가깝고 스코리아가 가장 원형에 가까운 것으로 나타났다. 정팔면체 평면에서 삼축실험결과와 Lade의 파괴포락선 및 Mohr-Coulomb의 파괴포락선을 비교한 결과 높은 응력하에서는 Lade의 파괴규준이 실험치와 일치하며, 낮은 응력하에서는 Mohr-Coulomb의 파괴규준이 실험치와 일치하는 것으로 나타났다. 그리고 Lade의 3차원 파괴면은 Mohr-Coulomb의 3차원 파괴면보다 크며, 이는 Lade의 파괴규준으로 산정된 전단강도정수가 Mohr-Coulomb의 파괴규준으로 구한 것 보다 더 크게 산정됨을 의미한다.

• Geomechanics and Engineering
• /
• 제9권1호
• /
• pp.115-124
• /
• 2015

Determination of mobilized shear strength parameters (that identify stresses on the failure plane) is required for analyzing the stability by limit equilibrium method. Generalized Hoek-Brown (GHB) and Mohr-Coulomb (MC) failure criteria are usually used for obtaining stresses on the plane of failure. In the present paper, the applicability of these criteria for determining the stresses on failure plane is investigated. The comparison is based on stresses on the real failure plane which are obtained from the Mohr stress circle. To do so, 18 sets of data (consist of principal stresses and angle of failure plane) presented in the literature are used. In addition, the values account for (VAF) and the root mean square error (RMSE) indices were calculated to check the determination performance of the obtained results. Values of VAF and RMSE for the normal stresses on the failure plane evaluated from MC are 49% and 31.5 where for GHB are 55% and 30.5, respectively. Also, for the shear stresses on failure plane, they are 74% and 36 for MC, 76% and 34.5 for GHB. Results show that the obtained stresses and angles of failure plane for each criterion differ from real ones, but GHB results are closer to the empirical results. Also, it is inferred that results are affected by the failure envelope not real failure plane. Therefore, obtained shear strength parameters are not mobilized. Finally, a multivariable regressed relation is presented for determining the stresses on the failure plane.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.963-971
• /
• 2008

Unsaturated soil mechanics has been often used to find out a cause of failure (tensile failure) of retaining walls and hill slopes containing sandy soils. Checking shear strength is a popular method by considering suction stress developed form pore water menisci among the grains and saturated pockets of pore water under negative pressure. Linear Mohr-Coulomb failure criterion is generally adopted as a failure criterion. However, depending on relative density, stress history, and the magnitude of stress, the failure behavior of sand may not follow linear M-C frictional behavior. For stress in the large compressive ranges, say from tens to hundreds of kPa, the linear M-C criterion is an adequate representation for the shear strength behavior of sand. However, less than tens of kPa, the M-C criterion often can not be accurately represented. Depending on failure criterion, the uniaxial tensile strength is different over 100% relative error. For sand behavior under small compression regimes, therefore, such as under low or zero gravity, or under undergoing tensile failure in the crest area of hill slopes or behind retaining walls, it is important to consider the non-linear behavior.

• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1999년도 Proceedings of the 1999 Annual Conference The Korean Society of Agricutural Engineers
• /
• pp.556-561
• /
• 1999

The real strength evvelope for soils without cemetation goes through the origin and is curved. The Mohr -Coulomb failure criterion with the strength parameters c' and ø' from conventional tests overestimates the shear strength available at low normal stresses. The results of laboratory tests interpreted in terms of the Mohr-Coulomb failure criterion are not appropriate for evaluation of surficial slope stability , because the range of effective normal stresses in the field are not used in the laboratory tests.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.434-443
• /
• 2009

Slope stability analysis is an essential part of rock slope design. For highly fractured rock, the limit equilibrium method (LEM) based slope stability analysis with a circular failure surface is often carried out assuming the rock mass behaves more or less as a continuum. This paper examines first, the applicability of the finite-element method (FEM) based shear strength reduction (SSR) technique for highly fractured rock slope, and second the use of Mohr-Coulomb (MC) failure criterion in conjunction with generalized Hoek-Brown (HB) failure criterion. The numerical results on a number of cases are compared in terms of the factor of safety (FS). The results indicated that the FEM-based SSR technique yields almost the same FSs from LEM, and that the MC and HB failure criteria yield almost identical FSs when the strength parameters for MC failure criterion are obtained based on the modified HB failure criterion if and only if value of the Hoek-Brown constant $m_i$ is smaller than 10 and slope angle is smaller than 1:1, otherwise MC failure criteria over-estimate the factor of safety.

• Geomechanics and Engineering
• /
• 제8권1호
• /
• pp.33-52
• /
• 2015

Based on the Mohr-Coulomb failure criterion, a gradient-dependent plastic model that considers the strain-softening behavior is presented in this study. Both triaxial shear tests on conventional specimen and precut-specimen, which were obtained from an ancient landslide, are performed to plot the post-peak stress-strain entire-process curves. According to the test results of the soil strength, which reduces from peak to residual strength, the Mohr-Coulomb criterion that considers strain-softening under gradient plastic theory is deduced, where strength reduction depends on the hardening parameter and the Laplacian thereof. The validity of the model is evaluated by the simulation of the results of triaxial shear test, and the computed and measured curves are consistent and independent of the adopted mesh. Finally, a progressive failure of the ancient landslide, which was triggered by slide of the toe, is simulated using this model, and the effects of the strain-softening process on the landslide stability are discussed.

• Structural Engineering and Mechanics
• /
• 제83권3호
• /
• pp.377-386
• /
• 2022

This paper considers dynamic impedance functions and presents a detailed analysis of the soil plasticity influence on the pile-group foundation dynamic response. A three-dimensional finite element model is proposed, and a calculation method considering the time domain is detailed for the nonlinear dynamic impedance functions. The soil mass is modeled as continuum elastoplastic solid using the Mohr-Coulomb shear failure criterion. The piles are modeled as continuum solids and the slab as a structural plate-type element. Quiet boundaries are implemented to avoid wave reflection on the boundaries. The model and method of analysis are validated by comparison with those published on literature. Numerical results are presented in terms of horizontal and vertical nonlinear dynamic impedances as a function of the shear soil parameters (cohesion and internal friction angle), pile spacing ratio and frequencies of the dynamic signal.

• 터널과지하공간
• /
• 제27권1호
• /
• pp.39-49
• /
• 2017

다양한 암반구조물의 안전도를 정량적으로 표현하는 지수로 안전율이 흔히 사용된다. 그러므로 동일한 응력조건에서 산정된 안전율이라 할지라도 안전율의 정의에 따라 안전율 계산 값의 차이가 있을 수 있으므로 적용하는 안전율의 정의와 특성을 이해하는 것이 중요하다. 이 연구에서는 Mohr-Coulomb 파괴조건식과 Hoek-Brown 파괴조건식을 활용하여 최대전단응력, 최대전단강도, 응력불변량, 최대주응력을 기반으로 하는 4종의 국부안전율을 정의하였다. 이어서 5가지 응력경로에 따른 각 안전율의 변화특성을 고찰하였다. 암반구조물 해석시 전통적으로 많이 이용되고 있는 전단강도 기반의 국부안전율은 최대주응력 및 응력불변량 기반의 안전율에 비해 높은 안전율 값을 계산함을 보였다. 이러한 결과는 보수적 암반공학적 설계가 필요한 경우 전단강도 기반의 국부안전율보다 최대전단응력이나 응력불변량 기반의 국부안전율 도입이 필요하다는 것을 말해준다. 또한 응력경로에 따라 파괴 시 최대주응력 값도 큰 차이가 있을 수 있음을 보였다.

• 대한토목학회논문집
• /
• 제34권3호
• /
• pp.947-954
• /
• 2014

일반적으로 Mohr-Coulomb 파괴 이론을 바탕으로 한 재료 파괴는 최대수직응력이나 최대전단응력 상태에서 파괴가 일어나는 것이 아니라 수직응력과 전단응력의 임계결합상태에서 파괴된다. 이에 본 연구에서는 배수성 아스팔트 혼합물 2종과 SMA 10mm혼합물 및 일반 밀입도 아스팔트 19mm를 이용한 $45^{\circ}C$와 $60^{\circ}C$에서 삼축압축시험을 실시하였다. Mohr-Coulomb의 파괴 이론을 바탕으로 삼축압축시험 결과를 정리한 결과 내부마찰각은 $38.9^{\circ}{\sim}46.9^{\circ}$로 다소 불규칙하게 측정되었으나 점착력의 경우 온도와 시편의 수침여부에 따라 다르게 나타났다. 또한, 아스팔트 혼합물의 간접인장강도시험과 삼축압축시험 상관관계를 알아보기 위해 삼축압축시험 결과로 평가된 점착력과 내부마찰각을 이용하여 계산된 이론적인 간접인장강도와 시험을 통해 직접 측정된 간접인장강도를 분석하였다. 두 간접인장강도 값은 비례하는 경향을 보였다.

• Geomechanics and Engineering
• /
• 제20권3호
• /
• pp.175-189
• /
• 2020

A set of relatively simple five local shear and tension failure variables is presented and then implemented into a generalized poroelastic hydromechanical numerical model to analyze failure potential and stability of variably saturated geologic media. These five local shear and tension failure variables are formulated from geometrical relationships between the Mohr circle and the Mohr-Coulomb failure criterion superimposed with the tension cutoff, which approximate together the Mohr effective stress failure envelope. Finally, fully coupled groundwater flow and land deformation in two variably saturated geologic media, which are associated with a slope (Case 1) and a tunnel (Case 2), respectively, and their failure potential and stability are simulated using the resultant hydromechanical numerical model. The numerical simulation results of both cases show that shear and tension failure potential and stability of variably saturated geologic media can be analyzed numerically simply and efficiently and even better by using the five local shear and tension failure variables as a set than by using the conventional factors of safety against shear and tension failures only.