• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.572-575
• /
• 1997

The embedded atom method based on density functional theory was developed as a new means for calculating ground state properties of realistic metal system by Murray S. Daw, Stephen M. Foiles and Michael I. Baskes. In the paper, we had corrected constitutive formulae and parameters on the nickel for the purpose of doing Embedded Atom Method analysis. And then we have computed the properties of the nickel on the fundamental scale of the atomic structure. In result, simulated ground state properties, such as the lattice constant, elastics constants and sublimation energy, show good agreement with Daw's simulation data and with experimental data.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표회 논문집(I)
• /
• pp.30-35
• /
• 1998

This study was carried out to investigate quantitatively the relationship between the water binder ratio and the concrete strength using finely ground granulated furnace blast slag. In the experiment, the compressive strength and elastic modulus of concrete which slag contents are 0%, 10%, 20% and 30% at 7days and 28days age. As a result, the compressive strength have a high correlation with slag contents and water binder ratio. Thus, it is possible to calculate the water binder ratio using compressive strength of concrete contented with slag.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 춘계 학술발표회
• /
• pp.750-758
• /
• 2009

This study, as basic research which was intended to develope the surface reinforcement method using reinforcement material which is applicable to very soft ground in Korea, was aimed at proposing the design parameter for the surface ground improvement method. To that end, a wide width tensile test using geotextile, geogrid and steel bar (substitute for bamboo) and 25 kinds of the laboratory model tests with the end restraint conditions of the reinforcement that comprises the constrained and partially constrained (3 types) conditions were conducted. And the result indicated that the modulus of subgrade reaction or $N_c$ value (5.3) apparently overestimated the bearing capacity of very soft ground such as dredged ground. Moreover, as a result of model test by partially constraining the preload of 23.0kgf using geotextile, the effect of bearing capacity($q_1$) appeared to be the largest till the loading stress was $0.4tf/m^2$ due to cohesion, while it reached 75% of the maximum bearing force after $0.4tf/m^2$ due to increase in the effect of bearing capacity($q_2$) caused by the tensile force of the reinforcement. Such results tended to have appeared constantly or very similarly with each other, irrespective of the type of reinforcement (geogrid, steel bar) and constraint conditions.

• Computers and Concrete
• /
• 제31권4호
• /
• pp.327-335
• /
• 2023

The most popular building material, concrete, is intrinsically linked to the advancement of humanity. Due to the ever-increasing complexity of cementitious systems, concrete formulation for desired qualities remains a difficult undertaking despite conceptual and methodological advancement in the field of concrete science. Recognising the significant pollution caused by the traditional cement industry, construction of civil engineering structures has been carried out successfully using Geopolymer Concrete (GPC), also known as High Performance Concrete (HPC). These are concretes formed by the reaction of inorganic materials with a high content of Silicon and Aluminium (Pozzolans) with alkalis to achieve cementitious properties. These supplementary cementitious materials include Ground Granulated Blast Furnace Slag (GGBFS), a waste material generated in the steel manufacturing industry; Fly Ash, which is a fine waste product produced by coal-fired power stations and Silica Fume, a by-product of producing silicon metal or ferrosilicon alloys. This result demonstrated that GPC/HPC can be utilised as a substitute for traditional Portland cement-based concrete, resulting in improvements in concrete properties in addition to environmental and economic benefits. This study explores utilising experimental data to train artificial neural networks, which are then used to determine the effect of supplementary cementitious material replacement, namely fly ash, Ground Granulated Blast Furnace Slag (GGBFS) and silica fume, on the compressive strength, tensile strength, and modulus of elasticity of concrete and to predict these values accordingly.

• 한국환경복원기술학회지
• /
• 제10권6호
• /
• pp.44-52
• /
• 2007

Recently, oystershell wastes cause serious environmental problem and the need for the researches on the recycling of oystershell have been increased and various methods are already in operation. Field plate bearing tests and numerical analysis were performed to investigate the bearing capacity of oystershell filled geotextile gabion which utilized the waste oystershell at the coastal oyster farm site. The waste oystershell mixed soil specimens were prepared for the laboratory test and field test in terms of varying blending ratio of granite soil and oystershell. Based on the cyclic plate load test results, the spring constant, subgrade modulus of ground, and the reinforcing parameters were determined. The field plate load test results indicate that the bearing capacity of the soil ground with the oystershell mixed ratio of 20% is greater than that of the original ground. Two-dimensional numerical analysis was evaluated the expected deformation in the given conditions. Analysis results show a similar characteristics on bearing capacity with the results of the field plate load test. These findings suggest that the oystershells are very promising construction materials for landfill and earth embankment in coastal area.

• 한국해양공학회지
• /
• 제15권1호
• /
• pp.73-78
• /
• 2001

Soundness evaluation of a structure being constructed under the sea is usually difficult. In this study, a cross-hole sonic logging(CSL) which have been used for non-destructive test of concrete piles is adopted for the integrity test and monitoring of DCM(deep cement mixing) treated soils. Chemical and physical characteristics of raw ground materials are analysed to delineate ground environmental effects on the strength of DCM treated soils. In order to convert cross-hole sonic logging data into compressive strength, correlations between compressive strengths and wave velocities of core samples have been obtained. It is found that there is little effect of ground environment on the strength of the DCM treated soils, and the density distribution of core samples and cross-hole logging data show that a defective zone may exist in the DCM treated soils. With the time lapse, however, the defective zone has been cured and consequently, compressive strength of the DCM treated soils increases and satisfies the design parameter. From this study it can be concluded that the cross-hole sonic logging can be used for the integrity test as well as monitoring the curing stage of the structures, successfully.

• Composites Research
• /
• 제28권3호
• /
• pp.118-123
• /
• 2015

In the current study explain about the bio-based composites made by groundnut shell as reinforcement with polyester resin matrix. Groundnut shell is an abundantly available natural waste byproduct and poly ester resin is widely used to fabricate of composites for good balance of mechanical properties because it is relatively low price and ease of handling. Evaluate the mechanical properties of manufactured groundnut shell/polyester composites by varying the amounts (wt %) of groundnut shell. Particulate shell reinforced polyester composites incorporating varying amounts of groundnut shell (5, 10, 15 and 20%) were characterized for their tensile strength, flexural strength, and impact strength. The mechanical properties improved with increasing particle loading up to 15% and decreased thereafter. Increasing in strength with increased particle shell loading was attributed to increase in surface area which enhanced load transfer between the polyester matrix and ground shall particulates. Scanning electron microscopic studies have been carried out to study the morphology of the composite. Thermal studies and water absorption properties of the composites also studied in this paper.

• 지질공학
• /
• 제6권1호
• /
• pp.23-31
• /
• 1996

NATM공법에 의한 지하 암반공동에서 숏크리트내의 불평형력이 지보 시스템에 전달되는 하중 전달 메커니즘을 고려하여 지보시스템내의 응력 재분배 과정을 모델링하였으며,그에 따른 지보시스템의 해석모델을 제안 하고 숏크리트의 탄성거동에 관하여 고찰하였다.응력 재분배 모델을 이용하여 설계변수가 변화함에 따라 지보시스템에 미치는 영향을 분석한 결과 숏크리트의 최대 압축응력은 현저히 감소되었다. 암반의 수평지압계수 및 탄성계수가 구조응답에 큰 영향을 미치나 지보시스템 자체의 특성 변화가 응답에 미치는 영향은 매우 적었다. 구조재의 안전율을 평가할 수 있는 상관식을 제시하였다. 본 연구결과를 이용하여 지하구조물의 안전성을 평가할 수 있을 것으로 기대된다.

• Geomechanics and Engineering
• /
• 제18권1호
• /
• pp.59-69
• /
• 2019

Grout injection is mainly used for permeability reduction and/or improvement of the ground by injecting grout material into pores, cracks, and joints in the ground. The oscillatory grout injection method was developed to enhance the grout penetration. In order to verify the level of enhancement of the grout, field grout injection tests, both static and oscillatory tests, were performed at three job sites. The enhancement in the permeability reduction and ground improvement effect was verified by performing a core boring, borehole image processing analysis, phenolphthalein test, scanning electron microscopy analysis, variable heat test, Lugeon test, standard penetration test, and an elastic wave test. The oscillatory grout injection increased the joint filling rate by 80% more and decreased the permeability coefficient by 33-68%, more compared to the static grout injection method. The constrained modulus of the jointed rock mass was increased by 50% more with oscillatory grout injection compared to the static grout injection, indicating that the oscillatory injection was more effective in enhancing the stiffness of the rock mass.

• 조명전기설비학회논문지
• /
• 제23권5호
• /
• pp.42-49
• /
• 2009

배전용 콘크리트 전주에 작용하는 힘들이 지반의 변위에 미치는 영향을 유한요소법을 이용하여 분석하였다. 지반의 종류, 풍하중, 근가의 위치, 매입길이, 경간의 길이를 변화시키며 단전주와 겹전주의 경우에 지반의 변위를 분석하였다. 근가의 위치는 매입길이의 1/4지점에서 변위가 최소로 나타났다. 지반의 종류는 지반의 강성이 클수록 변위가 작아서 연약한 점토나 느슨한 모래지반 또는 실트 지반은 변위가 크다. 겹전주는 굴착면적이 커서 변위가 다소 큰 것으로 판단되며 시공시에는 콘크리트보강이 필요하다. 지표면에 가까울수록 횡방향 변위는 매입길이비가 작은 전주가 더 크게 나타났다. 횡방향 변위를 줄이기 위해서는 매입길이를 크게 하는 것이 좋다. 경간길이는 횡방향 변위에 영향이 별로 없는 것으로 나타났다.