• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1996년도 추계학술대회 논문집
• /
• pp.300-302
• /
• 1996

Using the AC and DC methods we have studied th electrical properties of ZnO added TiO$_2$. The electrical conductivity of ZnO added TiO$_2$ was nearly unchanged with increasing the content of ZnO. Ac conductivity and conductance as a function of Frequency showed the similar trends. The impedance, admittance, and modulus spectrums were consistent with the results of DC conductivity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.706-709
• /
• 2004

A numerical method was developed that imposes constraint condition on the order parameters in martensitic phase transformation. In the method, an amplitude function having values of 1 or 0 was multiplied to transformation rates. The merit of the method is that the imposition of the constraint condition is more straightforward than a method with Lagrangian multiplier and easy to implement in the tangent modulus method. The developed method is applied to three-dimensional finite element analyses of single and poly crystalline shape memory alloys.

• 정보학연구
• /
• 제9권4호
• /
• pp.49-55
• /
• 2006

In this paper, a new fragile watermarking algorithm for digital image is presented, which makes resolving the security and forgery problem of the digital image to be possible. The most suitable watermarking method that verifies the authentication and integrity of the digital image is the Wong's method, which invokes the hash function (MD5). The algorithm is safe because this method uses the hash function of the cryptology. The operations such as modulus, complement, shift, bitwise exclusive-or, bitwise inclusive-or are necessary for calculating the value of hash function. But, in this paper, an Arithmetic encoding method that only includes the multiplication operation is adopted. This technique prints out accumulative probability interval, which is obtained by multiplying the input symbol probability interval. In this paper, the initial probability interval is determined according to the value of the key, and the input sequence of the symbols is adjusted according to the key value so that the accumulative probability interval will depend on the key value. The integrity of the algorithm has been verified by experiment. The PSNR is above the 51.13db and the verifying time is $1/3{\sim}1/4$ of the verifying time of using the hash function (MD5), so, it can be used in the real-time system.

• Advances in Computational Design
• /
• 제9권1호
• /
• pp.39-52
• /
• 2024

If the governing differential equation arising from engineering problems is treated as an analytic, continuous and derivable function, it can be expanded by one point as a series of finite numbers. For the function to be zero for each value of its domain, the coefficients of each term of the same power must be zero. This results in a recursive relationship which, after applying the natural conditions or the boundary conditions, makes it possible to obtain the values of the derivatives of the function with acceptable accuracy. The elastoplastic analysis of an inhomogeneous thick sphere of metallic materials with linear variation of the modulus of elasticity, yield stress and Poisson's ratio as a function of radius subjected to internal pressure is presented. The Beltrami-Michell equation is established by combining equilibrium, compatibility and constitutive equations. Assuming axisymmetric conditions, the spherical coordinate parameters can be used as principal stress axes. Since there is no analytical solution, the natural boundary conditions are applied and the governing equations are solved using a proposed new method. The maximum effective stress of the von Mises yield criterion occurs at the inner surface; therefore, the negative sign of the linear yield stress gradation parameter should be considered to calculate the optimal yield pressure. The numerical examples are performed and the plots of the numerical results are presented. The validation of the numerical results is observed by modeling the elastoplastic heterogeneous thick sphere as a pressurized multilayer composite reservoir in Abaqus software. The subroutine USDFLD was additionally written to model the continuous gradation of the material.

• 한국세라믹학회지
• /
• 제39권11호
• /
• pp.1069-1073
• /
• 2002

Al 함침에 의한 $B_4C/Al$ 복합체 제조시 Al 함침 분위기가 $B_4C/Al$ 복합체의 물성에 미치는 영향 및 후열처리에 미치는 영향을 조사하였다. 복합체 A($1100{\circ}C$/10분, 진공 함침)의 Al 함량이 19.4wt%로 복합체 B($1080{\circ}C$/10분, 상압의 알곤 함침)의 14.4wt%보다 많게 나타나 진공에서 B4C/Al 사이의 반응이 더디게 일어남을 알 수 있었다. 복합체 B의 열처리전의 물성은 밀도 2.65$g/cm^3$, MOR 503 MPa, Young's Modulus 237 GPa이고, $900{\circ}C/8h/Ar$ 열처리 후에는 밀도 2.56 $g/cm^3$, MOR 296 MPa, Young's Modulus 300 GPa로 복합체 A보다 우수한 물성을 보여주었다. 후열처리에 따른 구조의 변화는 XRD와 SEM에서 정상적으로 관찰되었으며, Al 함량은 DSC 분석으로 얻었다.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.359-370
• /
• 2000

The purpose of this investigation was to observe the viscoelastic properties of five commercial flowable(Aeliteflo, Flow it, Revolution, Tetric flow, Compoglass flow), three conventional hybrid(Z-100, Z-250, P-60) and two condensable(Synergy compact, SureFil) resin composites. A dynamic oscillatory shear test was done to evaluate the storage shear modulus (G'), loss shear modulus(G"), loss tangent(tan ${\delta}$) and complex viscosity(${\eta}^*$) of the resin composites as a function of frequency - dynamic frequency sweep test from 0.01 to 100 rad/s at $25^{\circ}C$ - by using Advanced Rheometric Expansion System(ARES). To investigate the effect on the viscosity of resin composites of filler volume fraction, the filler weight % and volume % were measured by means of Archimedes' principle using a pyknometer. The results were as follows 1. The complex viscosity ${\eta}^*$ of flowable resins was lower than that of hybrid resins and significant differences were observed between brands. The complex viscosity ${\eta}^*$ of condensable resins was higher than that of hybrid resins. The order of complex viscosity ${\eta}^*$ at ${\omega}$=10 rad/s was as follows, Surefil, Synergy compact, P-60, Z-250, Z-100, Aeliteflo, Tetric flow, Compoglass flow, Flow it, Revolution. The relative complex viscosity of flowable resins compared to Z-100 was 0.04~0.56 but Surefil was 30.4 times higher than that of Z-100. 2. The storage shear modulus G' and the loss shear modulus G" of flowable resins were lower than those of hybrid resins but those of condensable resins were higher. The patterns of the change of loss tangent, tan ${\delta}$, of resin composites with increasing frequency were significantly different between brands. The phase angles, ${\delta}$, ranged from $30.2{\sim}78.1^{\circ}$ at ${\omega}$=10 rad/s. 3. All composite resins represent pseudoplastic nature with increasing shear rate. 4. The complex shear modulus $G^*$ and the phase angle ${\delta}$ was represented by the frequency domain phasor form, $G^*({\omega})=G^*e^{i{\delta}}=G^*{\angle}{\delta}$. The locus of frequency domain phasor plots in a complex plane was a valuable method that represent the viscoelastic properties of composite resins. 5. There was no direct linear correlationship but a weak positive relation was observed between filler volume % or weight % and the viscosity of the resin composites.

• Journal of the Korean Wood Science and Technology
• /
• 제32권5호
• /
• pp.29-38
• /
• 2004

본 연구에서는 생분해성 고분자인 polybutylene succinate-adipate (PBS-AD)에 옥수수 전분을 충전제로 첨가한 생분해성 복합재의 열적성질에 대해 고찰하였다. 열분석은 온도에 대한 함수로서 복합재 물질의 화학적 성질과 중량 감소율을 측정할 수 있는 분석적인 방법으로 사용되고 었다. 옥수수 전분의 열안정성은 순수한 생분해성 고분자인 PBS-AD보다 낮았다. 옥수수 전분의 함량이 증가할수록 생분해성 복합재의 열안정성과 열분해 온도는 감소하였고 회분의 함량은 증가하였다. 이것은 생분해성 복합재의 계면에서의 결합려이 옥수수 전분의 혼합비율이 증가할수록 감소하였기 때문이다. 옥수수 전분의 함량이 증가할수록 생분해성 복합재의 유리전이온도(T_g) 와 용융온도(T_m) 에는 큰 변화가 없었다. 옥수수 전분이 혼합된 생분해성 고분자 복합재의 저장 탄성율(E')과 손실 탄성율(E") 값은 PBS-AD보다 높았다. 이 결과는 옥수수 전분의 첨가로 인하여 생분해성 복합재의 강성이 증가하였기 때문이다. 고온에서 생분해성 고분자 복합재의 감소된 저장 탄성율 값은 온도가 증가할수록 고분자 사슬의 운동성이 증가하기 때문이다. 위의 결과들로부터, 옥수수 전분이 생분해성 고분자 복합재를 제조하는데 충전제로서 사용이 가능하다고 예상할 수 있었으며 옥수수 선분과 생분해성 고분자의 계면에서의 결합력을 향상시키기 위하여 결합제의 사용이 요구된다.

• 구강회복응용과학지
• /
• 제34권2호
• /
• pp.72-79
• /
• 2018

목적: 본 연구의 목적은 수분 흡수가 여러 레진계 치아고정 재료의 굴곡강도와 탄성계수를 미치는 영향을 비교함으로써 물리적 성질에 대한 정보를 제공하는 것이다. 연구 재료 및 방법: 치아고정에 사용하는 레진으로 LightFix, G-FIX, G-aenial Universal Flo를 이용했다. 가로 25 mm, 세로 2 mm, 높이 2 mm의 시편을 각 재료당 즉시용 15개과 에이징용 15개를 제작했다. 즉시용은 $37^{\circ}C$, 100% 상대습도에 24시간 동안 보관됐고 에이징용은 30일 동안 $37^{\circ}C$, 증류수에 보관했다. 만능시험기를 이용해 굴곡강도와 탄성계수를 측정했고 independent t-test를 이용해 각 실험 재료의 24시간 군과 30일 군 간 비교를 했다. 실험재료 간의 비교는 one-way ANOVA test로 분석했고 95% 유의 수준으로 Scheffe's test를 이용해 사후 검정했다. 결과: 본 연구의 결과 LighFix군에서는 에이징 후에 굴곡강도와 탄성계수가 유의하게 감소했고 G-FIX군에서는 에이징 후에 굴곡강도와 탄성계수에 유의한 차이가 없었다. G-aenial Universal Flo군에서는 굴곡강도는 유의하게 감소했으나 탄성계수는 유의한 변화가 없었다. 한편 굴곡강도와 탄성계수는 24시간 군, 30일 군 모두 LightFix가 가장 낮은 수치, G-aenial Universal Flo가 가장 높은 수치를 보였다. 결론: 어떤 레진의 굴곡강도와 탄성계수는 구강환경에서 에이징시 변화할 수 있으므로 동요치 고정을 목적으로 레진을 선택할 때 이를 고려해야 한다.

• Steel and Composite Structures
• /
• 제35권5호
• /
• pp.641-657
• /
• 2020

A unique lightweight string truss deployable bridge assembled by thin-walled fiber reinforced polymer (FRP) and metal profiles was designed for emergency applications. As a new structure, investigations into the static structural performance under the serviceability limit state are desired for examining the structural integrity of the developed bridge when subjected to unsymmetrical loadings characterized by combined torsion and bending. In this study, a full-scale experimental inspection was conducted on a fabricated bridge, and the combined flexural-torsional behavior was examined in terms of displacement and strains. The experimental structure showed favorable strength and rigidity performances to function as deployable bridge under unsymmetrical loading conditions and should be designed in accordance with the stiffness criterion, the same as that under symmetrical loads. In addition, a finite element model (FEM) with a simple modeling process, which considered the multi segments of the FRP members and realistic nodal stiffness of the complex unique hybrid nodal joints, was constructed and compared against experiments, demonstrating good agreement. A FEM-based numerical analysis was thereafter performed to explore the effect of the change in elastic modulus of different FRP elements on the static deformation of the bridge. The results confirmed that the change in elastic modulus of different types of FRP element members caused remarkable differences on the bending and torsional stiffness of the hybrid bridge. The global stiffness of such a unique bridge can be significantly enhanced by redesigning the critical lower string pull bars using designable FRP profiles with high elastic modulus.

• 대한전자공학회논문지TC
• /
• 제39권4호
• /
• pp.173-179
• /
• 2002

본 논문은 DFE (Decision Feedback Equalizer)구조와 CMA (Constant Modulus Algorithm), 그리고 LMS (Least Mean Square) 알고리즘을 이용한 등화기에 대하여 기술한다. DFE 구조는 기존의 transversal 구조의 등화기에 비하여 빠른 채널 적응 속도와 낮은 BER (Bit Error Rate) 값을 가지며 ISI(Intersymbol Interference)가 심한 환경에서도 좋은 성능을 나타낸다. 본 등화기는 16/64 QAM(Quadrature Amplitude Modulation) 변복조 방식에 적용할 수 있으며, 고속으로 동작할 수 있도록 고속의 곱셈기와 많은 수의 CSA (Carry Save Adder)를 사용하였다. COSSAP/sup TM/ 캐드 툴을 사용하여 부동 소수점 모델과 고정 소수점 모델을 개발하였으며, VHDL 모델을 개발하였다. 시뮬레이션 결과에 따라 feedback 부분과 feedforward 부분에 각각 12개와 8개의 탭을 사용하였으며, 다중 경로 페이딩 채널에서 BER이 10-6일 때를 기준으로 보면 등화기를 사용하지 않은 채널의 BER 보다 SNR(Signal to Noise Ratio)이 4dB 정도 향상되었다. SYNOPSYS/sup TM/ 캐드 툴과 삼성의 0.5 ㎛ standard cell library (STD80) 를 이용하여 로직 합성을 수행하였으며, 전체 게이트 카운트는 약 13만개를 보였다.