굴절/회절 하이브리드 렌즈 적용 슬림 모바일 렌즈 설계 (Slim Mobile Lens Design Using a Hybrid Refractive/Diffractive Lens)
-
- 한국광학회지
- /
- 제31권6호
- /
- pp.281-289
- /
- 2020
본 논문은 하이브리드 굴절/회절광학소자를 이용한 초슬림 모바일 카메라 렌즈를 보고한다. 먼저 앞서 보고된 23개의 광학 설계 사양 분석을 통해 전장길이(total track length) 최소화를 위하여, 광시야 렌즈 설계에서 일반적으로 적용되는 음(-)의 렌즈를 제1렌즈로 사용하는 리트로포커스(retrofocus) 타입이 아닌, 양(+)의 렌즈가 제일 먼저 선행하는 텔레포토(telephoto) 타입을 선택하였다. 이후 초기 최적 설계 및 제르니케 다항식 기반 수차 분석을 통한 보정 설계를 진행하였으며, 보정 설계 과정에서 잔여 구면색수차(chromatic spherical aberration)의 효과적 제거를 위하여 굴절 및 회절이 결합된 하이브리드 렌즈 1매를 적용하였다. 적용된 최종 설계는 하이브리드 렌즈 1매 포함 총 6매의 렌즈를 이용하여 F/2.0, 화각 90°, 유효초점길이 2.23 mm, 전장길이 3.7 mm를 달성하였고, 결과적으로 1.7의 낮은 전장길이 대 초점길이 비 즉, 텔레포토비(telephoto ratio)를 달성하였다. 동일 전장길이를 갖는 하이브리드 렌즈 미적용 비교 설계 대비, 공간주파수 180 cycles/mm에서 MTF 값이 중심 시야에서는 63%에서 71~73%로 약 8~10% 개선되었고, 0.5, 0.7, 0.9 시야에서도 2~3% 개선되었다. 또한, 가공성 및 회절 패턴에 의한 산란 등을 고려하였을 때 조리개에 위치한 렌즈가 하이브리드 렌즈로 적절함을 알 수 있었고, 이 경우 2개의 회절존으로도 성능 개선이 확인되었다.
This paper proposes a method to extend Inter-Carrier Interference (ICI) canceling Orthogonal Frequency Division Multiplexing (OFDM) receivers for 5G mobile systems to spatial multiplexing 2×2 MIMO (Multiple Input Multiple Output) systems to support high-speed ground transportation services by linear motor cars traveling at 500 km/h. In Japan, linear-motor high-speed ground transportation service is scheduled to begin in 2027. To expand the coverage area of base stations, 5G mobile systems in high-speed moving trains will have multiple base station antennas transmitting the same downlink (DL) signal, forming an expanded cell size along the train rails. 5G terminals in a fast-moving train can cause the forward and backward antenna signals to be Doppler-shifted in opposite directions, so the receiver in the train may have trouble estimating the exact channel transfer function (CTF) for demodulation. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceller is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number n to receiver sub-carrier number l is generated. In case of n≠l, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 8 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, 2×2MIMO QPSK and 16QAM modulation schemes, BER (Bit Error Rate) improvement was observed when the number of taps in the multi-tap equalizer was set to 31 or more taps, at a moving speed of 500 km/h and in an 8-pass reverse doppler shift environment.
Objective: Computed tomography (CT) is an established method for the diagnosis, staging, and treatment of multiple myeloma. Here, we investigated the potential of photon-counting detector computed tomography (PCD-CT) in terms of image quality, diagnostic confidence, and radiation dose compared with energy-integrating detector CT (EID-CT). Materials and Methods: In this prospective study, patients with known multiple myeloma underwent clinically indicated whole-body PCD-CT. The image quality of PCD-CT was assessed qualitatively by three independent radiologists for overall image quality, edge sharpness, image noise, lesion conspicuity, and diagnostic confidence using a 5-point Likert scale (5 = excellent), and quantitatively for signal homogeneity using the coefficient of variation (CV) of Hounsfield Units (HU) values and modulation transfer function (MTF) via the full width at half maximum (FWHM) in the frequency space. The results were compared with those of the current clinical standard EID-CT protocols as controls. Additionally, the radiation dose (CTDIvol) was determined. Results: We enrolled 35 patients with multiple myeloma (mean age 69.8 ± 9.1 years; 18 [51%] males). Qualitative image analysis revealed superior scores (median [interquartile range]) for PCD-CT regarding overall image quality (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), edge sharpness (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), image noise (4.0 [4.0-4.0] vs. 3.0 [3.0-4.0]), lesion conspicuity (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]), and diagnostic confidence (4.0 [4.0-5.0] vs. 4.0 [3.0-4.0]) compared with EID-CT (P ≤ 0.004). In quantitative image analyses, PCD-CT compared with EID-CT revealed a substantially lower FWHM (2.89 vs. 25.68 cy/pixel) and a significantly more homogeneous signal (mean CV ± standard deviation [SD], 0.99 ± 0.65 vs. 1.66 ± 0.5; P < 0.001) at a significantly lower radiation dose (mean CTDIvol ± SD, 3.33 ± 0.82 vs. 7.19 ± 3.57 mGy; P < 0.001). Conclusion: Whole-body PCD-CT provides significantly higher subjective and objective image quality at significantly reduced radiation doses than the current clinical standard EID-CT protocols, along with readily available multi-spectral data, facilitating the potential for further advanced post-processing.
본 논문에서는 DisplayPort용 전자기기 또는 클록 발생을 요구하는 다양한 회로에서 발생 할 수 있는 전자방해(EMI) 현상을 줄일 수 있는 위상 동기 루프와 확산 대역 클록 발생기를 구현 하였다. 이 시스템은 기본적으로 송신용 위상 동기 루프와 확산 대역 클록 발생기 구현을 위한 전하펌프2 와 기준주파수 분주기 등으로 구성된다. 본 논문에서는 2.7Gbps/1.62Gbps DisplayPort 응용 회로에 적합 하도록 10개의 다중 위상 신호를 출력 할 수 있는 270MHz/162MHz 듀얼 모드 위상 동기 루프를 설계 하였고 추가적으로 1.35GHz/810MHz의 위상 동기 루프를 설계하여 지터를 크게 감소시킬 수 있는 구조를 제안하였다. 270MHz/162MHz 위상 동기 루프와 5:1 시리얼라이저 2개, 그리고 1.35GHz 위상 동기 루프와 2:1 시리얼라이저를 연동함으로써 지터 성분을 크게 줄일 수 있다. 위상 동기 루프에서 사용 된 주파수 전환 다중위상 전압제어 발진기와 더불어 DisplayPort 규격에 맞는 주파수 전환이 가능 하도록 분주기를 공유하고 50% duty ratio를 보장할 수 있는 주파수 분주기 구조를 제안 하였다. 또한, 지터를 줄이기 위해서 출력전류 오차를 크게 줄일 수 있는 전하펌프 구조를 제안 하였다. 0.13 um CMOS 공정을 사용하여 설계 하였으며, 270MHz/162MHz PLL의 칩 면적은
목적 : ADHD아동의 감각자극에 대한 생리학적 반응특성은 감각자극의 종류, 측정도구, 그리고 반응으로 알아보고, 행동학적 특성은 측정도구, 빈도, 측정도구별로 공통된 문제 항목을 분석하여 ADHD아동의 감각자극에 대한 특성을 알아보고자 하였다. 연구방법 : 체계적 고찰방법을 사용하였다. 1990년 1월부터 2011년 12월 31일까지 학회지에 게재된 논문을 Riss4U, MEDLINE/PubMed, CINAH을 통해 검색하였다. 주요 검색어는 "ADHD, Children, Sensory processing, sensory integration, SP, SSP, SOR, TIE, CSP, SEP, EDR"으로 하였으며, 최종적으로 15개의 논문을 분석하였다. 결과 : 1. ADHD아동을 대상으로 감각자극에 대한 생리학적 반응에 관한 연구는 5개(33.33%)이고, 행동학적 반응에 관한 연구는 10개(66.67%)이며, 두 가지를 병행한 연구는 2개(13.33%)로 전체 15개(100%)논문을 분석하였다. 2. 생리학적 반응에 관한 연구 5개 중, 촉각과 고유 감각 자극을 사용한 연구는 3개, 후각, 청각, 시각, 촉각, 전정감각을 모두 사용한 연구는 2개였다. 3. 행동학적 특성에 관한 연구 10 중, SP는 5개, SSP는 3개, SOR은 2개, TIE는 1개, CSP는 1개이다. 4. ADHD아동의 감각자극에 대한 생리학적 반응특성은 일차감각피질의 손 영역에 있는 신경원세포의 활동전위에서 큰 반응을 보였다. 반응 시 초기에 큰 반응을 보였고 뒤로 갈수록 빠른 습관화를 보이는 것으로 나타났고, 회복 시에 많은 비 특이적 반응을 보였다. 5. 행동학적 반응특성은 부주의/산만, 전정감각처리, 지구력/근 긴장도 조절, 감정반응에 대한 감각입력 조절, 활력이 부족하고 허약함을 보이는 특성이 있었다. 결론 : ADHD아동의 감각자극에 대한 생리학적 반응 특성과 행동학적 특성을 아는 것은 ADHD아동의 감각조절 문제를 이해하는데 중요한 근거가 된다.
본 논문에서는 주로 고속 디지털 통신시스템 응용을 위해 고해상도, 저전력 및 소면적을 동시에 만족하는 45nm CMOS 공정으로 제작된 4단 파이프라인 구조의 12비트 100MS/s ADC를 제안한다. 입력단 SHA 회로에는 높은 입력 주파수를 가진 신호가 인가되어도 12비트 이상의 정확도로 샘플링할 수 있도록 게이트-부트스트래핑 회로가 사용된다. 입력단 SHA 및 MDAC 증폭기는 요구되는 DC 이득 및 높은 신호스윙을 얻기 위해 이득-부스팅 구조의 2단 증폭기를 사용하며, 넓은 대역폭과 안정적인 신호정착을 위해 캐스코드 및 Miller 주파수 보상기법을 선택적으로 적용하였다. 채널길이 변조현상 및 전원전압 변화에 의한 전류 부정합을 최소화하기 위하여 캐스코드 전류 반복기를 사용하며, 소자의 부정합을 최소화하기 위하여 전류 반복기와 증폭기의 단위 넓이를 통일하여 소자를 레이아웃 하였다. 또한, 제안하는 ADC에는 전원전압 및 온도 변화에 덜 민감한 저전력 기준 전류 및 전압 발생기를 온-칩으로 집적하는 동시에 외부에서도 인가할 수 있도록 하여 다양한 시스템에 응용이 가능하도록 하였다. 제안하는 시제품 ADC는 45nm CMOS 공정으로 제작되었으며 측정된 DNL 및 INL은 각각 최대 0.88LSB, 1.46LSB의 값을 가지며, 동적성능은 100MS/s의 동작속도에서 각각 최대 61.0dB의 SNDR과 74.9dB의 SFDR을 보여준다. 시제품 ADC의 면적은
본 논문에서는 OFDMA(Orthogonal Frequency Division Multiple Access) 상향 링크 시스템에서 발생하는 높은 PAPR(Peak to Average Power Ratio) 문제를 해결하기 위한 방법으로 선택적 DFT(Discrete Fourier Transform) spreading 기법을 새롭게 제안한다. 제안된 방법은 기존의 DFT spreading 기법에 선택적 특성을 추가한 것으로, SLM(Selective Mapping) 기법과 DFT spreading 기법이 혼합된 형태를 갖는다. 그러나 제안된 기법은 copy branch를 사용함에 있어 그 복잡도의 증가를 최소화하기 위해 하나의 DFT만을 사용하고, DFT출력 신호에 여러 개의 각기 다른 matrix를 곱함으로써 여러 개의 copy branch를 생성한다. 여기서 사용된 matrix는 DFT 앞에서의 입력 데이터 위상 회전을 선형 변환함으로써 얻어진 것으로, 각각의 matrix는 그 복잡도가 하나의 DFT보다 매우 낮게 설계된다. 성능 분석을 위해 QPSK 변조 및 512 point IFFT의 사용을 가정하고 한 사용자에게 할당된 sub-carrier 수는 각각 75, 100인 두 가지 경우를 고려하였다. 성능 분석 결과에서, 제안된 선택적 DFT spreading 기법은 copy branch 수가 4일 때 약 5.2 dB 이상의 PAPR 저감 효과를 가지며, 이는 기존의 DFT spreading만을 사용하는 경우 보다 약 1.8 dB 이상, 그리고 32 copy branch를 사용하는 SLM보다도 약 0.95 dB 이상의 뛰어난 PAPR 저감 성능이다. 또한 복잡도의 비교에서도 사용자에게 할당된 sub-carrier의 수가 100일 때, 제안된 기법은 기존의 DFT spreading 기법 보다는 증가되었으나 제안된 기법의 성능에 가장 근접하는 32 copy branch의 SLM보다 약 91.79 % 저감된 곱셈 량을 갖는다. 제안된 기법의 효율성을 확인할 수 있으며, 사용자에게 할당된 sub-carrier의 수가 증가되어 단일 사용자가 모든 sub-carrier를 사용하는 경우, 즉 일반적인 OFDM과 같은 상황에서도 유사한 성능적 이득을 예상할 수 있다.
의료기술의 발전과 방사선 치료 장비의 발전으로 세기변조방사선치료와 같은 고 정밀 방사선치료의 빈도수가 증가하였다. 정밀하고 복잡한 치료계획에서 방사선 치료 시 영상유도방사선치료는 필수가 되었다. 특히 선형가속기에 진단용 영상장비의 도입으로 CBCT스캔이 가능해졌으며 이는 3차원 이미지를 통해 환자의 자세를 검·교정할 수 있게 되었다. 보다 정밀한 환자 자세의 재현이 가능해졌지만, 영상획득과정에서 환자에게 전달되는 피폭선량은 무시할 수 없다. 방사선 치료분야에서 방사선 방호최적화는 필요하며 피폭저감화를 위한 노력은 필요하다. 하지만 3차원 CBCT영상 획득 시 피폭저감화를 위해 촬영조건을 변경하여 촬영할 경우 환자의 위치정렬을 할 수 없을 정도의 화질이나 인공물이 발생해서는 안 된다. 본 연구에서Rando phantom을 활용해 각 촬영조건별 영상을 스캔하고 평가하였다. 100 kV, 80 mA, 25 ms, F1 filter 180° 조건에서 가장 높은 SNR이 나타났다. 관전압, 관전류가 높아질수록 Noise가 감소했으며 보우타이필터는 높은 관전류에서 최적의 효과를 나타냈다. 실제 스캔된 이미지를 토대로 환자위치정렬이 모든 촬영조건에서 가능했으며 가장 낮은 SNR을 나타낸 70 kV, 10 mA, 20 ms, F0 filter 180° 조건에서 충분히 환자자세정렬을 위한 영상유도방사선치료는 가능함을 확인하였다. 본 연구에서 촬영조건에 따른 영상평가를 실시하였으며 피폭 저감화를 위해 낮은 관전압과 관전류, 작은 회전각 스캔이 선량 저감화에 효과적일 것으로 보인다. 이를 토대로 CBCT촬영 시 환자의 피폭선량을 가능한 낮게 해야 할 것이다.
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70