• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.426-428
• /
• 1997

This paper presents the linearized optimal PWM techniques for current source GTO converter. This proposed method is to linearize an optimal PWM modulation strategy so that the turn-on/off-periods of the GTO switches can be computed on-line in real-time for any modulation index. This allows the rapid and continuous regulation of the DC output current while producing the sinusoidal AC input current waveform and unit power factor.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제52권7호
• /
• pp.352-360
• /
• 2003

This paper deals with a simple method in order to analyze and compare the harmonic characteristics in the multi-level inverter. Generally, the magnitude of harmonic components becomes different according to the multi-carrier Pulse Width Modulation(PWM) techniques, the modulation index($M_i$) and the switching frequency The previous papers analyzed the harmonic characteristics from the viewpoint of the space voltage vector. Hence, the calculation of the harmonic vector becomes more difficult and complex in 4-level or over 5-level. However, the proposed method has reduced an amount of calculation and simplified the process of it, using the relationship between the reference voltage and the output phase voltage to the load neutral point. It is applied to the 5-level cascade inverter and the harmonic characteristics for each multi-carrier PWM technique are compared through the simulation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.307-312
• /
• 1994

In this investigation the PFM(Pulse Frequency Modulation} will be used for optimizing PWM inverter pulse pattern. In traditional the pulse frequency of PWM is kept const. But modulated PWM's frequency in this study, the sinusoidal inverter's performance should be improved. The PWM pulsepatterns are definitely controlled so that the time-integral function of the voltage vectors in the space vector notation may show a circular locus. Further, performance index will be minimized because of minimizing distortion of output current. Finally, we will implement itusingsingle-chip microprocessor.

• Journal of Power Electronics
• /
• 제16권6호
• /
• pp.2076-2084
• /
• 2016

In this paper, a novel scheme to eliminate common-mode voltage (CMV) is proposed for three-level neutral-point clamped (NPC) inverters. In the proposed scheme, a low-power full-bridge converter is utilized to produce compensatory voltage for CMV, which is injected into an NPC inverter through a single-phase four-winding transformer. With the proposed circuit, the power range for applications is not limited, and the maximum modulation index of the inverter is not reduced. These features are suitable for high-power medium-voltage machine drives. The effectiveness of the proposed method is verified by simulation and experimental results.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.113-121
• /
• 2013

This paper introduces a simple core loss calculation method for output filter inductor in pulse width modulation (PWM) DC-AC inverter. Amorphous C-core (AMCC-320) is used to analyze the core loss. In order to measure core loss of the output filter inductor and validate the proposed method, a single-phase half-bridge inverter and a calorimeter are used. By changing switching frequency and modulation index (MI) of the inverter, core loss of the AMCC-320 is measured with the lab-made calorimeter and the results are compared with calculated core loss. The proposed method can be easily extended to other core loss calculation of various converters.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제1권1호
• /
• pp.77-83
• /
• 2012

In this paper, an optimal solution to the harmonic reduction problem in a cascaded multilevel inverter with non-equal DC sources using a genetic algorithm (GA) is presented. Switching angles are generated for different values of modulation index by the proposed algorithm, considering minimum voltage total harmonic distortion (THD) whereas selected harmonics are controlled within the allowable limits at all desired modulation indices including the point of discontinuity. Results are stored as a look-up table to be used to control the inverter for a certain operating point. The computed angles are used in a simulated circuit in Matlab\Simulink to validate the results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.378-380
• /
• 1996

This paper presents the novel control and analysis of GTO-CSC. The control method is based on the linearization of an optimal modulation strategy so that the turn-on-periods of the GTO switches can be computed in real-time for any specified modulation index. These PWM patterns allow to produce minimal ac line current low order harmonics of ac line current and low switchings. Finally, the computer simulation results are presented to verify the theoretical analysis.

• 대한전자공학회논문지
• /
• 제23권5호
• /
• pp.591-596
• /
• 1986

A binary continuous phase frequency shift keying (CPFSK), whose phase is a continuous function of time and instantaneous frequency is constant, is a bandwidth efficient constant envelope signalling scheme. A transmitting signal is formed by combined coding of a convolutional encoder and a binary CPFSK modulator. The signal is transmitted throuth additive white Gaussian noise(AWGN) channel. If the received signal is detected by a coherent maximum likelihood(ML) receiver, error probability can be expressed approximately in terms of minimum Euclidean distance. We propose rate 2/4 codes for the improvement of error performance without increating the data rate per bandwidth and the receiver complexity. Its minimum Euclidean distances are compared with those of rate \ulcornercodes as a function of modulation index and observation interval.

• 한국소음진동공학회논문집
• /
• 제25권5호
• /
• pp.345-351
• /
• 2015

Sounds of electrically powered vehicle components such as window lift system, roller blind, etc., are required to be more comfortable and not to irritate the people emotionally. In this paper, a study was conducted to identify the significant sound quality metric and compose the luxuriousness sound quality index of electrically powered vehicle roller blind which is part of vehicle sunroof system. Before conducting subjective evaluation, sound characteristics of roller blind was analyzed and set the target operating sound for subjective evaluation. Thus, transfer sound of roller blind which has the characteristics of sound modulation was used for subjective evaluation. Multiple linear regression analysis was carried out by chosen Zwicker's metrics which are pointed by comments of jurors. Loudness and sharpness related metrics are prime metrics in luxuriousness sound quality index we composed. Also, effect of roller blind assay when it is attached to real vehicle was identified to evaluate the validity of index.

• 한국인터넷방송통신학회논문지
• /
• 제17권5호
• /
• pp.51-59
• /
• 2017

본 논문은 차등공간변조(DSM)를 위한 안테나 인덱스 순열들의 그레이 코드 오더를 제안한다. 실행하기 위해서 계산 복잡도(Computational complexity)와 사전 편찬식 오더를 사용하는 기존 DSM 이 둘의 유사성을 도출한 Trotter-Johnson의 유명한 Ranking & Unranking 알고리즘들을 차용했다. 사전 편찬식 오더를 넘어선 그레이코드로 얻어낸 신호 대비 잡음비는 시뮬레이션들을 통해 성능이 분석되었다. 그레이 코딩 프레임워크를 기초로, 그레이 코드 오더에 속한 완전 순열들의 예상되지 않는 위치들에서 직접적으로 선택된 액티브 안테나 지수들의 순열들이 있는 인터섹티드 그레이 코드(I-code) 오더로 명칭된 다양성-강화 기법를 제안한다. 분석과 시뮬레이션들에서, I-Gray 코드 오더가 그레이 코드 오더에 대한 추가적인 다이버시티 차수를 만들어 내 성능이 우수했다.