• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.632-637
• /
• 2011

A new tooth profile which is adjusted on the amount of addendum modification factor is proposed for reducing vibration and noise of gears. The transmission error of the new profile can be designed more uniformly than that of the standard involute profile. The basic concepts of tooth profile modification are to reduce the load in contact area and to find the appropriate profile modification factor for operation condition. In this study, gears were estimated to constructive safety of bending strength and contact strength durability by using ROMAX program, and were compared with results by design formula of AGMA standard.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.83-88
• /
• 2006

Evaluation of collision risk plays a key role in developing the expert system of navigation and collision avoidance. This paper presents a new collision risk model formula that is one modification model on the basis of one approach to the evaluation of collision risk using sech function produced by Prof. Jeong in his relevant $articles^{[2][3][4][5]}$. And as a grope in collision risk evaluation field, this paper applied the new model in appraising the collision risk, suggested how to decide the safe range of own ship’'s action. Moreover this paper also analyzed theoretically how to determine the coefficients as describes in the new modification model formula, and suggested the appropriate values as applicable.

• Journal of Navigation and Port Research
• /
• v.31 no.2
• /
• pp.121-126
• /
• 2007

Evaluation of collision risk plays a key role in developing the expert system of navigation and collision avoidance. This paper presents a new collision risk model formula that is one modification model on the basis of one approach to the evaluation of collision risk using sech function produced in earlier studies. And as a tool of the evaluation field of ship collision, this paper applied the new model in appraising the collision risk and represented how to decide the safe range of own ship's action. Moreover this paper also analyzed theoretically how to determine the coefficients as described in the new modification model, and suggested the appropriate values as applicable.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.6
• /
• pp.1337-1344
• /
• 2012

This paper analyzed electronic transaction systems of social commerce service which have rapidly grown recent days, and as a result found that most of the electronic transaction systems of social commerce service had payment amount modification issue. This paper proposes a method for solving the payment amount modification issue. The proposed method adds an authentication process between servers of social commerce service provider and payment-gateway company. The added authentication process prohibits user getting involved in payment procedure, and thus prevents payment amount modification.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.389-399
• /
• 2021

The purpose of this study was to explore the domestic and overseas home modification policies, and review the direction of domestic home modification policies to enable 'Aging In Place; AIP' and the competencies required of occupational therapist as and expert in home modification. In order to expand occupational therapy for domestic home modification and strengthen occupational therapist competency, it is required to establish a clear and practical home modification process that reflects the design and intervention of occupational therapy. Appropriate selection and standardization of the evaluation tools that identifies the needs of the elderly and reflects the characteristics of domestic housing types are also required. In addition, it is necessary to understand policies and systems, and endeavour to establish a relevant knowledge base for communication and cooperation with experts in other fields. In terms of the policy, there is a need for the home modification support system that allows the elderly to adapt to their aging regardless of their income level, beyond the existing support system, which was implemented mainly for low-income people and disabled. In addition, as in overseas cases, the efforts need to be made to provide various and efficient measures, such as support for barrier-free housing, expansion of the scope of support through cooperation between the national government and local governments, low-interest loans and tax reductions, and establishment of governance with organizations and institutions related to home modification services.

• Convergence Security Journal
• /
• v.18 no.2
• /
• pp.77-88
• /
• 2018

The purposes of this paper are to research the military utilization of weather modification techniques and to induce their research priority when considering the Korean Peninsular environment and technical level. To achieve these goals, the advantages and disadvantages of weather modification technologies have been discussed, and the evaluation index evaluation was derived through the Delphi method, and the weight of the evaluation index and the final research priority were induced through analytic hierarchical process. Analysis shows that the ionospheric modulation technology has the highest priority in terms of effectiveness as a weapon system and compatibility in the Korean Peninsula environment. It is expected that Korean ionosphere modification can disturb C4ISR function of the enemy and guarantee ours reliably when operating PGM, military satellite, surveillance & reconnaissance equipments, etc. Other weather modification technologies except for ionosphere modification should be developed gradually in that potential threat can be expanded to neighboring countries after the Unification of the Korea.

• ETRI Journal
• /
• v.32 no.6
• /
• pp.921-931
• /
• 2010

It has been shown that the principal subspace-based multichannel Wiener filter (MWF) provides better performance than the conventional MWF for suppressing interference in the case of a single target source. It can efficiently estimate the target speech component in the principal subspace which estimates the acoustic transfer function up to a scaling factor. However, as the input signal-to-interference ratio (SIR) becomes lower, larger errors are incurred in the estimation of the acoustic transfer function by the principal subspace method, degrading the performance in interference suppression. In order to alleviate this problem, a principal subspace modification method was proposed in previous work. The principal subspace modification reduces the estimation error of the acoustic transfer function vector at low SIRs. In this work, a frequency-band dependent interpolation technique is further employed for the principal subspace modification. The speech recognition test is also conducted using the Sphinx-4 system and demonstrates the practical usefulness of the proposed method as a front processing for the speech recognizer in a distant-talking and interferer-present environment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.859-864
• /
• 2001

For earthquake resistance design, a response modification factor is used to reduce the design strength and it reflects ductility, reserve strength, redundancy and damping effect. But this factor has not theoretical basis. In this study, two response modification factors are compared and analyzed for shear wall apartment building.; the one is introduced by ATC-19 Procedures, the other is suggested FEMA-273 and ATC-40 through nonlinear static analysis. For the results, ATC-19 procedure gives a reasonable estimation to R factor. But $R_{u}$ by using FEAM-273 and ATC-40 methods is estimated so small in case of a minor or moderate earthquake region. Due to this fact, response modification factor is smaller than suggested load criterion 3.0. So, it needs to decrease wall volume and reduce the global strength and system stiffness for proper ductile behavior matching to domestic load criterion.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.816-819
• /
• 2002

This paper is the study on stress analysis for tooth modification of high speed gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes compromising several cost effective and engineering advantages. The load transmission occurred by the contacting surfaces arises variable elastic deformations which are being evaluated through finite element analysis. The automatic gear design program is developed to model gear shape precisely. This gear design system developed was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when gear tooth contacts. And this paper proposes method for the tooth modification after carrying out stress analysis using a finite element method.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.2
• /
• pp.162-167
• /
• 2003

This paper is the study on stress analysis for tooth modification of high speed gear using a finite element method. Gear drives constitute very important mechanisms in transmitting mechanical power processes which compromise several cost effective and engineering advantages. The load transmission which occurred by the contacting surfaces arises variable elastic deformations evaluated through finite element analysis. The automatic gear design program was developed to model gear shape precisely. This developed gear design system was used by pre-processor of FEM packages. The distribution of stresses at contacting surfaces was examined when gear tooth contacts. And this paper proposes a method for the tooth modification after carrying out stress analysis using a finite element method.