• 지질공학
• /
• 제4권3호
• /
• pp.343-356
• /
• 1994

대형구조물 및 발전소 또는 도로, 철도 등 모든 산업 및 사회간접시설물을 건설할 때, 새롭게 영구사면들이 조성되며 이러한 사면에서 지질재해인 암반의 사면붕괴가 종종 발생한다. 붕괴된 사면은 붕괴원인 및 붕괴형태 그리고 안정성 평가를 위한 현장조사 및 실내시험을 통하여 붕괴모델링(Failure Modelling)을 설정하게 되며, 이에 따른 사면의 안전율을 구하고 설계 기준에 맞도록 사면을 보강하게 된다. 사면의 보강은 현장여건이 최대한 반영된 최적의 붕괴모델링이 요구되며, 이에 따른 보강공법으로는 사면 경사각을 낮추거나 사면을 보강 처리하므로서 안전율을 증가시키는 방법 등이 있다.

• 대한전자공학회논문지
• /
• 제21권6호
• /
• pp.17-26
• /
• 1984

Predeposition, 질소분위기 drive-in과 산소분위기 drive-in 공정에 의한 실리콘내에서의 boron과 Phosphorus의 일차원적 분포를 implicit 방법과 SOR(successive over-relaxation)방법을 이용하여 산출해 내는 컴퓨터 프로그램 (DIFSIM)을 작성하였다. 확산공정의 모델로는 vacancy mechanism을 사용하였으며, 특히 phosphorus의 경우에는 Fair와 Tsai의 이론을 이용하였다. 불순물 농도에 따른 산화막의 성장속도는 vacancy mechanism에 의하였으며, 산화에 의한 확산공정에의 영향(OED ; oxidation-enhanced diffusion)은 Watkins replacement mechanism으로 modelling하였다. DIFSIM을 이용한 결과는 실험결과와 상당히 잘 일치하였으며, SUPREM II외 결과와도 비교하여 보았다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.108-113
• /
• 2009

Buildings with multi-complex spaces designed for architectural values and functional requirements give rise to technical challenges in terms of energy efficiency and thermal comfort. Since spaces in such buildings are connected with openings with geometrical complexity, it is hard to define zoning plan and to control heating/cooling loads effectively. This paper presents a case study on the evaluation of operation strategy for a building with multi-complex spaces using computer simulation. The modelling methodology and the results of the simulations are also described.

• 지질공학
• /
• 제5권2호
• /
• pp.201-213
• /
• 1995

열극암반(Fractured rockmass)의 지하수유동해석을 위해서는 열극현상에 대한 전반적인 이해를 필요로 한다. 열극현상과 관련된 분야는 열극(Fracture)의 생성과 역학이론, 전파, 종식, 분포체계와 구조 및 열극체계 모델링등 다양한 분야가 이에 속한다. 그러나 이러한 분야의 연구는 일부 분야를 제외하고 외국에서도 그 역사가 깊지 못하며, 우리나라의 경우 근래에 일부 학계와 업계에서 관심을 보이고 있을 뿐이다.산업사회의 발달과 함께 다양한 목적으로 지하공간의 이용을 필요로 하게 되었고, 지하공동의 성능평가에 대한 적용방법 또한 복잡하고 다양한 접근방법을 요구하고 있다. 열극현상에 대한 정확한 이해가 지질학과 같은 어느 한 분야의 지식만으로 접근할 수가 없으므로, 열극의 정확한 분포 특성과 열극생선과정의 이론을 근간으로 열극체계 및 유동해석모델의 적절한 연관성을 도출하도록 조화를 이루므로써 신뢰성 높은 성능평가의 목표를 달성할 수 있을 것으로 기대된다.

• 한국농공학회논문집
• /
• 제54권5호
• /
• pp.79-89
• /
• 2012

The objectives of this paper were to evaluate the wind flow behind the livestock ventilation fan for small-scale wind power generation and to make flow profiles of imaginary ventilation fan for future simulation works. The field experiments using typical 50-inch fan indicated that the wind flow behind the ventilation fan had a good possibility of power generation with its high and steady wind speeds up to a distance of 2 m. The expected electricity yield was almost 101~369 W with a small (0.8 m radius) wind turbine. The decline of ventilation fan performance caused by the obstacle was also not significant with about 4 % from a distance of 2 m. The flow profiles for the computational fluid dynamics (CFD) simulation was created by combining the direction vectors analyzed from tuft visualization test and the flow predicted by the rotating fan modeling. The flow profiles are expected to provide an efficient saving of computational time and cost to design a better wind turbine system in future works.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 1999년도 추계학술대회논문집
• /
• pp.91-99
• /
• 1999

In Pusan Harbour, new port development projects are implemented such as the Extended Terminal adjacent to the Gamman Terminal, Pusan New Port, the Nary $\infty$ piers, etc. which will require new marine traffic environments in the Passage I of Pusan Harbour Specially, the turning basin of the Extended Terminal adjacent to the Gamman Terminal gas been designed to overlay the Passage I of Pusan Harbour, Which will interrupt the inbound traffic flow and the results will be worried to decrease the efficiency of port operation. Therefore, this paper will be aimed to evaluate the traffic congestion in the Pusan Passage I due to the opening of new ports within Pusan Harbour in 2006 and 2011 by using computer simulation based the queueing theory.

• 시스템엔지니어링학술지
• /
• 제12권1호
• /
• pp.59-71
• /
• 2016

The Nuclear and Fossil Steam Turbines record a considerable number of failures annually. Some of these failures reported are as result of blade failure. The failure of the L-0 blade in a Steam Turbine is one of the most reported blade failure in Nuclear and Fossil steam turbines. This paper seeks to identify the best Non Destructive Evaluation (NDE) method or methods to be used in the steam turbine L-0 blades inspection process. The development of systems engineering processes presents an opportunity to apply NDE inspection to the L-0 blades. This process apply computer modelling of the L-0 using ANSYS and by simulating the stresses experienced by the L-0 blade during operation it is possible to identify the most susceptible areas for crack formation and growth. The results from these models compared to industry data for validation. The analysis of these results used to predict the most probable failure location and failure modes. Therefore NDE inspection can be applied to these areas with greater degree of accuracy. This would be beneficial in the increasing the accuracy in the detection of cracks and hence save inspection time and the overall inspection cost. Furthermore, not only the location for crack formation and NDE inspection determined but also best the NDE inspection technique/techniques to be applied appropriately on the L-0 blade are prescribed.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.471-493
• /
• 2013

This paper presents a framework for seismic damage evaluation for Algerian buildings adapted from HAZUS approach (Hazard-United States). Capacity and fragility curves were adapted to fit the Algerian building typologies (Reinforced Concrete structures, Confined or Non-Confined Masonry, etc). For prediction purposes, it aims to estimate the damages and potential losses that may be generated by a given earthquake in a prone area or country. Its efficiency is validated by comparing the estimated and observed damages in Boumerd$\grave{e}$s city, in the aftermath of Boumerd$\grave{e}$s earthquake (Algeria: May $21^{st}$ 2003; $M_w$ = 6.8). For this purpose, observed damages reported for almost 3,700 buildings are compared to the theoretical predictions obtained under two distinct modelling of the seismic hazard. In one hand, the site response spectrum is built according to real accelerometric records obtained during the main shock. In the other hand, the effective Algerian seismic code response spectrum (RPA 99) in use by the time of the earthquake is considered; it required the prior fitting of Boumerd$\grave{e}$s site PGA (Peak Ground Acceleration) provided by Ambraseys' attenuation relationship.

• 천문학회지
• /
• 제48권3호
• /
• pp.165-175
• /
• 2015

We investigate physical properties of the nearby (∼ 7.5 pc) astrometric binary μ Cas in the context of standard evolutionary theory. Based on the spectroscopically determined relative abundances ([α/Fe] ≳ +0.4 dex, [Fe/H] ∼ −0.7 dex), all physical inputs such as opacities and equation of state are consistently generated. By combining recent spectroscopic analyses with the astrometric observations from the HIPPARCOS parallaxes and the CHARA array, the evolutionary model grids have been constructed. Through the statistical evaluation of the χ²-minimization among alternative models, we find a reliable evolutionary solution (M_A, M_B, t_age) = (0.74 M_⊙, 0.19 M_⊙, 11 Gyr) which excellently satisfies observational constraints. In particular, we find that the helium abundance of μ Cas is comparable with the primordial helium contents (Y_p ∼ 0.245). On the basis of the well-defined stellar parameters of the primary star, the internal structure and the p-mode frequencies have been estimated. From our seismic computation, μ Cas is expected to have a first order spacing ∆ν ∼ 169 μHz. The ultimate goal of this study is to describe physical processes inside a low-mass star through a complete modelling from the spectroscopic observation to the evolutionary computation.

• 대한공간정보학회지
• /
• 제14권4호통권38호
• /
• pp.61-70
• /
• 2006

본 논문에서는 SPOT 5호 HRG 스테레오 영상을 이용하여 수치표고모형을 생성하기 위한 사진측량학적 처리과정을 제시하고 수치표고모형 생성을 위한 HRG supermode 영상의 정확도 잠재성을 평가하고자 하였다. 센서모델링을 위하여 광속조정을 행한 후 에피폴라 영상재배열과 영상정합 과정 등을 통하여 수치표면모형을 생성하였다. HRG 영상으로부터 추출된 DEM 성과를 축척 1:5000의 수치지형도로부터 추출된 기준 DEM과 여러 시험구간 상에서 비교하였다. 전체구간 중 5m 미만의 DEM 오차를 나타내는 부분의 비율은 53.8%이었고, 5m를 초과하는 오차부분은 구름, 수역, 건물 등에 의한 영향을 받는 것으로 확인되어 이러한 지역을 제외하고 평가한 정확도는 약 2.5m의 RMSE를 나타내었다. 아울러 추출된 수치표면모형(DSM)을 사용하여 3차원 건물모델과 대상지역 전체의 3차원 가시화 모델을 작성하였다.