• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.24 no.5
• /
• pp.326-332
• /
• 2012

In this paper, error analyses on the calculation of offshore wind speed have been conducted using HeMOSU-1 data to develop offshore wind energy in Yeonggwang sea of Korea and onshore observed wind data in Buan, Gochang and Yeonggwang for 2011. Offshore wind speed data at 98.69 m height above M.S.L is estimated using relational expression induced by linear regression analysis between onshore and offshore wind data. In addition, estimated offshore wind speed data is set at 87.65 m above M.S.L using power law wind profile model with power law exponent(0.115) and its results are compared with the observed data. As a result, the spatial adjustment error are 1.6~2.2 m/s and the altitude adjustment error is approximately 0.1 m/s. This study shows that the altitude adjustment error is about 5% of the spatial adjustment error. Thus, long term observed data are needed when offshore wind speed was estimated by onshore wind speed data. because the conversion of onshore wind data lead to large error.

• Journal of Veterinary Clinics
• /
• v.32 no.4
• /
• pp.324-329
• /
• 2015

The primary aim of this study was to investigate biosecurity practices in pig farms and to determine the major risk factors associated with PCV2 infection for a sampled swine population in Korea. To this end, we analyzed data from a cross-sectional study of 296 farrow-to-finish farms, which was conducted between March and September 2014 to explore the prevalence of swine disease at farm level. Face-to-face interviews by on-site visit of trained veterinarians were conducted with the farm owners or managers using a standardized questionnaires with information about basic demographical data and management practices. Farms were classified as negative or positive through the use of infection profiles that combined data on serological testing including PCR antigen test result, antibody titer and sero-conversion pattern at each age category taking into account vaccination status. Data were analyzed using multivariate ordinal logistic regression. Results from this study indicated that biosecurity level of the farms was considered not good given low compliance of the biosecurity programs and facilities in the farm: off-site removal of dead stocks (7%), off-site location of storage facility for incoming feeds (12.6%), off-site pick-up location for finishers (19.3%), restrictions on feed supplier vehicles for farm entrance (19.6%), restriction of finisher trucks entering the farm (22.4%), and restriction on manure disposal trucks entering the farm (26.4%). In the final model (n = 255), allowance of finisher truck driver to the pig unit had increased risk of infection (OR = 2.4, 95% CI 1.22-4.67) whereas farms with a sign forbidding the entrance had decreased risk of infection (OR = 0.19, 95% CI 0.10-0.58). Further comprehensive research with larger sample size is required to better understand the multifactorial characteristic that some predisposing risk factors that were not available in this study. To the best knowledge of the authors, this was the first study to use empirical data to report risk factors associated with PCV2 infection in the Korean pig farms. Results from the current study could be used to decide optimal biosecurity measures to reduce the impact of PCV2 infection to farmers and policy makers.

• Korean Journal of Remote Sensing
• /
• v.34 no.6_3
• /
• pp.1383-1398
• /
• 2018

Sea surface wind is one of the most fundamental variables for understanding diverse marine phenomena. Although scatterometers have produced global wind field data since the early 1990's, the data has been used limitedly in oceanic applications due to it slow spatial resolution, especially at coastal regions. Synthetic Aperture Radar (SAR) is capable to produce high resolution wind field data. KOMPSAT-5 is the first Korean satellite equipped with X-band SAR instrument and is able to retrieve the sea surface wind. This study presents the validation results of sea surface wind derived from the KOMPSAT-5 backscattering coefficient data for the first time. We collected 18 KOMPSAT-5 ES mode data to produce a matchup database collocated with buoy stations. In order to calculate the accurate wind speed, we preprocessed the SAR data, including land masking, speckle noise reduction, and ship detection, and converted the in-situ wind to 10-m neutral wind as reference wind data using Liu-Katsaros-Businger (LKB) model. The sea surface winds based on XMOD2 show root-mean-square errors of about $2.41-2.74m\;s^{-1}$ depending on backscattering coefficient conversion equations. In-depth analyses on the wind speed errors derived from KOMPSAT-5 backscattering coefficient data reveal the existence of diverse potential error factors such as image quality related to range ambiguity, discrete and discontinuous distribution of incidence angle, change in marine atmospheric environment, impacts on atmospheric gravity waves, ocean wave spectrum, and internal wave.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.4
• /
• pp.626-631
• /
• 2019

The policy-making and technological development for the supply expansion of eco-friendly automobiles has been continuing, but the internal combustion engines still accounts for about 95%. Also, in order to meet the stricter emission regulations of internal combustion engines based on fossil fuels, the proportion of after-treatments for vehicles and (ocean going) vessels is gradually increasing. This study is a basic study for the post-Euro-VI exhaust response of CNG buses, and it is to investigate the basic characteristics according to Pd substitution transition metal effect, catalyst volume effect and space velocity. A catalysts was prepared and tested using a model gas reactor. The NGOC catalyst with 3Pd exhibited the highest catalytic activity with 22% at $300^{\circ}C$, 48% at $350^{\circ}C$ and about 75% at $500^{\circ}C$. 3Co NGOC containing 3wt% of transition metal was excellent in oxidation ability, and it was small in size of 2nm, and the degree of catalyst dispersion was improved and de-NO/CO conversion was high. The volume of the NGOC-LNT-SCR catalyst system was optimal in the combination of 1.5+0.5+0.5 with a total score of 165, considering $de-CH_4/NOx$ performance and catalyst cost. For SV $14,000h^{-1}$, the $CH_4$ reduction performance was the highest at about 20%, while the SV $56,000h^{-1}$ was the lowest at about 5%. If the space velocity is small, the flow velocity decreases and the time remaining in the catalyst volume become long, so that the harmful gas was reduced.

• Korean Journal of Remote Sensing
• /
• v.35 no.2
• /
• pp.203-215
• /
• 2019

As hyperspectral sensors that can be mounted on drones are developed, it is possible to acquire hyperspectral imagery with high spatial and spectral resolution. Although the importance of atmospheric correction has been reduced since imagery of drones were acquired at a low altitude,studies on the conversion process from raw data to spectral reflectance should be done for studies such as estimating the concentration of surface materials using hyperspectral imagery. In this study, a vicarious radiometric calibration and an atmospheric correction algorithm based on atmospheric radiation transfer model were applied to hyperspectral data of drone and the results were compared and analyzed. The vicarious calibration method was applied to an empirical line calibration using the spectral reflectance of a tarp made of uniform material. The atmospheric correction algorithm used ATCOR-4 based Modran-5 that was widely used for the atmospheric correction of aerial hyperspectral imagery. As a result of analyzing the RMSE of the difference between the reference reflectance and the correction, the vicarious calibration using the tarp in a single period of hyperspectral image was the most accurate, but the atmospheric correction was possible according to the application purpose of using hyperspectral imagery. If the correction process of normalized spectral reflectance is carried out through the additional vicarious calibration for imagery from multiple periods in the future, accurate analysis using hyperspectral drone imagery will be possible.

• Animal Bioscience
• /
• v.34 no.11
• /
• pp.1811-1821
• /
• 2021

Objective: A trial was conducted to investigate the effects of supplemental levels of Mn provided by organic and inorganic trace mineral supplements on growth, tissue mineralization, mineral balance, and antioxidant status of growing broiler chicks. Methods: A total of 500 male chicks (8-d-old) were used in 10-day feeding trial, with 10 treatments and 10 replicates of 5 chicks per treatment. A 2×5 factorial design was used where supplemental Mn levels (0, 25, 50, 75, and 100 mg Mn/kg diet) were provided as MnSO₄·H₂O or MnPro. When Mn was supplied as MnPro, supplements of zinc, copper, iron, and selenium were supplied as organic minerals, whereas in MnSO₄·H₂O supplemented diets, inorganic salts were used as sources of other trace minerals. Performance data were fitted to a linearbroken line regression model to estimate the optimal supplemental Mn levels. Results: Manganese supplementation improved body weight, average daily gain (ADG) and feed conversion ratio (FCR) compared with chicks fed diets not supplemented with Mn. Manganese in liver, breast muscle, and tibia were greatest at 50, 75, and 100 mg supplemental Mn/kg diet, respectively. Higher activities of glutathione peroxidase and superoxide dismutase (total-SOD) were found in both liver and breast muscle of chicks fed diets supplemented with inorganic minerals. In chicks fed MnSO₄·H₂O, ADG, FCR, Mn balance, and concentration in liver were optimized at 59.8, 74.3, 20.6, and 43.1 mg supplemental Mn/kg diet, respectively. In MnPro fed chicks, ADG, FCR, Mn balance, and concentration in liver and breast were optimized at 20.6, 38.0, 16.6, 33.5, and 62.3 mg supplemental Mn/kg, respectively. Conclusion: Lower levels of organic Mn were required by growing chicks for performance optimization compared to inorganic Mn. Based on the FCR, the ideal supplemental levels of organic and inorganic Mn in chick feeds were 38.0 and 74.3 mg Mn/kg diet, respectively.

• Journal of The Korean Association For Science Education
• /
• v.40 no.6
• /
• pp.611-620
• /
• 2020

The purpose of the study is to find creativity factors of students in the process of small group modeling and relate them to the types of interactions among students. In order to capture students' detailed interactions, this study was conducted as an 'essential case study' through qualitative analysis. We have developed the modules of nine lessons about terraforming, and they were used in an actual classroom. In order to understand the creativity of the students in the process of modeling, students' discourses and interview data were analyzed using 19 creative factors or abilities. The findings are as follows. Frequently found creativity factors are Elaboration, Evaluation, Visualization, Resist premature closer, Originality, Analysis and Concentration. And students' interactions that affect students' creativity in the process of modeling can be classified into four categories: Suggestion, Agreement, Questioning, Refutation, and Conversion. Through each interaction, students demonstrated the process of expressing and modifying their own thoughts and ideas in the modeling process. The findings of the study suggest that it is important to the teachers to understand types of interactions among students and the relationship between the types of interaction and creativity factors for students' creative modeling in modeling-based learning.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.279-290
• /
• 2021

This study evaluated the economic feasibility of facility farms according to the introduction of the ultra-high density pot cultivation (UHDPC) for mango. The basic model was selected as a representative farmhouse case in the Jeonnam region, and seven scenarios for conventional crops were tested. The economic feasibility of crop switching was analyzed through partial budget analysis (PBA). The PBA analysis results were supplemented by adding a sensitivity analysis and a break-even point (BEP) analysis. As a result of the analyses, it was found that crop conversion was economical because the increase in the profit coefficient was greater than the increase in the loss coefficient due to the introduction of mango for all conventional crops. The economics of introducing mango was more sensitive to changes in gross income than to changes in cost items. The results show the detailed conditions of crop selection according to the conditions and preferences of individual farms by presenting the direction of increase and decrease by budget item and information on the amount of increase or decrease. In particular, the BEP analysis result, which is about half of the farms case, is significant in that it presents the minimum target value according to production and market risks.

• Applied Chemistry for Engineering
• /
• v.32 no.1
• /
• pp.20-27
• /
• 2021

Effects of the etching treatment of SAPO-34 catalyst were investigated to improve the catalytic lifetime in DTO reaction. The aqueous NH3 solution was a more appropriate treatment agent which could control the degree of etching progress, compared to that of using a strong acid (HCl) or alkali (NaOH) solution. Therefore, the effect on characteristics and lifetime of SAPO-34 catalyst was observed using the treatment concentration and time of aqueous NH3 solution as variables. As the treatment concentration or time of aqueous NH3 solution increased, the growth of erosion was proceeded from the center of SAPO-34 crystal plane, and the acid site concentration and strength gradually decreased. Meanwhile, it was found that external surface area and mesopore volume of SAPO-34 catalyst increased at appropriate treatment conditions. When the treatment concentration and time were 0.05 M and 3 h, respectively, the lifetime of the treated SAPO-34 catalyst was the longest, and was significantly enhanced by ca. 36% (based on DME conversion of > 90%) compared to that of using the untreated catalyst. The model for the etching progress of SAPO-34 catalyst in a mild treatment process using aqueous NH3 solution was also proposed.

• The Journal of the Korea Contents Association
• /
• v.21 no.4
• /
• pp.347-358
• /
• 2021

The purpose of this study was to investigate the stage of concern and use level of early childhood teachers' STEAM, and to find out whether there is a difference in the stage of concern according to individual teachers' variables. The subjects were 242 teachers in charge of 3-5 years old kindergarten and daycare center in G city. The research tool was the stages of concern questionnaire (SoCQ). The collected data were converted to relative intensity by applying percentile conversion chart in the guidelines, and this was expressed as a concern profile graph, and t-test and ANOVA were performed to find out the difference in concern according to teacher's background variables. The research results are as follows. First, the stage of concern in early childhood teachers' STEAM was identified as a critical non-user profile. Second, the stage of concern in the teacher's STEAM was judged as a person who did not use, or was implemented for less than 2 years, and was a non-user or a novice. In addition, it was found that most of the teachers did not receive formal education for STEAM. third. There were differences in the educational background, career, current execution status of teachers, whether or not to take related courses in pre-service teacher education, and whether to plan for future implementation. And there were no differences in the majors and institution types of teachers. Based on these results, a support plan for changing the stage of concern of teachers about STEAM and improving the level of use was suggested.