• 한국통신학회논문지
• /
• 제31권10A호
• /
• pp.968-975
• /
• 2006

고속 데이터 전송을 위하여, 송수신단에 다중 안테나를 사용함으로써 독립적인 페이딩 채널을 다수개 형성하여 다이버시티 이득과 코딩 이득을 동시에 얻는 MIMO(Multiple-Input Multiple-Output) 방식에 대한 연구가 활발히 진행되고 있다. 하지만 아직 UWB(Ultra Wide Band) 시스템과의 간섭에 대한 분석은 이루어지고 있지 않다. 이에 본 논문에서는 공간 다이버시티 특성을 가진 블록 코드를 OFDM 시스템에 적용하여, MIMO-OFDM 수신기에 인접한 UWB 기기로부터 SFBC(Space Frequency Block Code)-OFDM 시스템과 SFTC(Space Frequency Trellis Code)-OFDM 시스템에 .미치는 간섭 영향을 MIMO 채널 환경에서 성능을 분석하였다. 시뮬레이션 결과 SFTC-OFDM 시스템이 MB(Multi Band)-OFDM UWB 간섭에 대해 SFBC-OFDM 시스템보다 더 강인한 성능을 보여주었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제11권9호
• /
• pp.4220-4241
• /
• 2017

For the downlink energy-harvesting small cell network, this paper proposes an interference management algorithm based on distributed coalitional game. The cooperative interference management problem of the energy-harvesting small cells is modeled as a coalitional game with transfer utility. Based on the energy harvesting strategy of the small cells, the time sharing mode of the small cells in the same coalition is determined, and an optimization model is constructed to maximize the total system rate of the energy-harvesting small cells. Using the distributed algorithm for coalition formation proposed in this paper, the stable coalition structure, optimal time sharing strategy and optimal power distribution are found to maximize the total utility of the small cell system. The performance of the proposed algorithm is discussed and analyzed finally, and it is proved that this algorithm can converge to a stable coalition structure with reasonable complexity. The simulations show that the total system rate of the proposed algorithm is superior to that of the non-cooperative algorithm in the case of dense deployment of small cells, and the proposed algorithm can converge quickly.

• 한국재료학회지
• /
• 제31권7호
• /
• pp.403-408
• /
• 2021

Various surface colors are predicted and implemented using the interference color generated by controlling the thickness of nano-level diamond like carbon (DLC) thin film. Samples having thicknesses of up to 385 nm and various interference colors are prepared using a single crystal silicon (100) substrate with changing processing times at low temperature by plasma-enhanced chemical vapor deposition. The thickness, surface roughness, color, phases, and anti-scratch performance under each condition are analyzed using a scanning electron microscope, colorimeter, micro-Raman device, and scratch tester. Coating with the same uniformity as the surface roughness of the substrate is possible over the entire experimental thickness range, and more than five different colors are implemented at this time. The color matched with the color predicted by the model, assuming only the reflection mode of the thin film. All the DLC thin films show constant D/G peak fraction without significant change, and have anti-scratch values of about 19 N. The results indicate the possibility that nano-level DLC thin films with various interference colors can be applied to exterior materials of actual mobile devices.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2007년도 동계학술발표회 논문집
• /
• pp.100-101
• /
• 2007

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2013년도 임시총회 및 하계학술연구발표회
• /
• pp.97-97
• /
• 2013

• 한국위성정보통신학회논문지
• /
• 제6권2호
• /
• pp.26-34
• /
• 2011

저전력으로 옥내 고품질의 통신환경을 제공하는 펨토셀에는 등록된 유저만 접근이 가능한 Closed Access mode와 모두에게 접근을 허락한 Open Access mode, 이렇게 대표적으로 두 가지의 접근 모드가 있다. 본 논문에서는 두 접근 방식의 펨토셀이 혼재된 LTE 기반의 OFDMA 셀룰라 환경에서 유저 간의 성능 차이를 완화하고, 시스템 전체의 성능을 향상시키는 접근 모드에 따른 자원 분배를 제안한다. 상대적으로 Closed Access mode보다 다른 유저들에게 고품질의 통신 환경을 제공하는 Open Access mode 펨토셀에게 더 많은 무선 자원을 허용한다. 무선 자원을 더 많이 허용하면 Open Acees mode 펨토셀을 사용하는 유저의 성능은 향상하지만 동시에 다른 유저에게 미치는 간섭 또한 증가하기 때문에 이러한 trade-off 관계를 고려한 최적의 자원 할당이 필요하다. 따라서 시스템 레벨 시뮬레이션을 통해서 최적의 자원 할당 값을 구하고 기존 방식과 최적 값을 적용한 제안한 방식을 시뮬레이션 한 결과, 제안한 방식이 기존 방식보다 전체적인 셀 성능을 향상 되는 것을 볼 수 있었다.

• ETRI Journal
• /
• 제37권3호
• /
• pp.460-470
• /
• 2015

Orthogonal frequency-division multiplexing (OFDM) is one of the most widely used technologies in current wireless communication systems and standards. Cognitive radio (CR) provides a robust solution to the problem of spectrum congestion as it offers opportunistic usage of frequency bands that are not occupied by primary users. Due to the underlying sensing, spectrum shaping, scaling, and interoperable capabilities of OFDM, it has been adapted as a best transmission technology for CR wireless systems. However, the performance of an OFDM-based CR wireless system is affected by the existence of narrowband interference (NBI) from other users. Further, due to carrier frequency offset in NBI sources, NBI energy may spread over all subcarriers of an OFDM signal. In this paper, a fixed Amplify-and-Forward (AF) relay that operates at a frequency band that is different from that of direct mode is introduced to suppress the effect of NBI. Analytical expressions are derived for outage probability in direct, AF-relay, and incremental relaying modes. The outage performance of the proposed AF relay-based CR network is proven to be better than that of direct mode.

• 한국통신학회논문지
• /
• 제37A권12호
• /
• pp.1133-1139
• /
• 2012

본 논문에서는 연계 빔형성과 비연계 빔형성 방법이 동시에 가능한 하이브리드 모드 빔형성 (HMB) 방법을 제안한다. HMB는 점근적으로 합 전송 증가율에 있어서 최적의 빔형성 방법임을 증명한다. 다양한 모의 실험을 통해서 HMB는 대칭 간섭 채널 환경에서 연계 빔형성 방법과 거의 동일한 성능을 달성함을 보인다. 또한, 보다 현실적인 비대칭적 간섭 채널 환경에서는 비대칭 채널 환경에서 연계 빔형성의 전력 비효율성으로 인한 성능의 저하를 갖지만, 연계 빔형성 방법보다는 우수한 성능을 갖는다는 것을 보인다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.342-350
• /
• 2010

Randomizing the switching frequency (RSF) to reduce the electromagnetic interference (EMI) of switching power converters is a well-known technique that has been previously discussed. The randomized pulse position (RPP) technique, in which the switching frequency is kept fixed while the pulse position (the delay from the starting of the switching cycle to the turn-on instant within the cycle) is randomized, has been previously addressed in the literature for the same purpose. This paper presents a double-hybrid technique (DHB) for EMI reduction in dc-dc switching regulators. The proposed technique employed both the RSF and the RPP techniques. To effectively spread the conducted-noise frequency spectrum and at the same time attain a satisfactory output voltage quality, two parameters (switching frequency and pulse position) were randomized, and a third parameter (the duty ratio) was controlled by a digital compensator. Implementation was achieved using field programmable gate array (FPGA) technology, which is increasingly being adopted in industrial electronic applications. To evaluate the contribution of the proposed DHB technique, investigations were carried out for each basic PWM, RPP, RSF, and DHB technique. Then a comparison was made of the performances achieved. The experimentally investigated features include the effect of each technique on the common-mode, differential-mode, and total conducted-noise characteristics, and their influence on the converter’s output ripple voltage.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권10호
• /
• pp.3908-3920
• /
• 2015

In this paper, performance analysis of full-duplex (FD) relay selection under decode-and-forward (DF) relaying mode is carried out by taking into account several critical factors, including the distributions of the received signal-to-noise ratio (SNR) and the outage probability of wireless links. The tradeoff between the FD and half-duplex (HD) modes for relay selection techniques is also analyzed, where the former suffers from the impact of residual self-interference, but the latter requires more channel resources than the former (i.e., two orthogonal channels are required). Furthermore, the impact of optimal power allocation (OPA) on the proposed relay-selection scheme is analyzed. Particularly, the exact closed-form expressions for outage probability of the proposed scheme over Rayleigh fading channels are derived, followed by validating the proposed analysis using simulation. Numerical results show that the proposed FD based scheme outperforms the HD based scheme by more than 4 dB in terms of coding gain, provided that the residual self-interference level in the FD mode can be substantially suppressed to the level that is below the noise power.