• Journal of applied mathematics & informatics
• /
• v.42 no.2
• /
• pp.291-303
• /
• 2024

In this paper, we consider a feedforward network of overloaded multiclass processor sharing queues and we give a fluid model solution under the condition that the system is initially empty. The main theorem of the paper provides sufficient conditions for a fluid model solution to be linear with time. The results are illustrated through examples.

• The Journal of Korean Academy of Prosthodontics
• /
• v.19 no.1
• /
• pp.39-45
• /
• 1981

Distal-extension removable partial dentures have long been implicated in the increase in mobility and the destruction of the supporting structures of the primary abutment teeth. Various clasping systems have traditionally been used to retain distal extension removable partial dentures, and other designs have been proposed to minimize torquing forces on the abutment teeth. Most recent studies investigating the effects of removable partial dentures on abutment teeth have been performed in it laboratory setting. Results obtained from in vitro research have given dentists insight into removable partial denture design, but laboratory test model cannot be constructed that simulates actual functional or parafunctiona1 movements and forces. The purpose of this study was to clinically evaluate the degree of tooth mobility produced by two clasping systems (suprabulge type and infrabulge type) used for distal extension removable partial dentures. Akers clasp and R.P.I. system were selected for the evaluation, and four patients required a distal extension removable partial denture on the mandibular arch were selected for participation in the study. Two partial dentures were constructed in the same condition expect the design of clasp. All abutments in the study were mandibular first or second premolars. Measurements of mobility were made with a research tool designed by $M\"{u}hlemann$. This instrument, periodontometer, measures tooth mobility in the mouth by means of a dial gauge accurated to 0.01mm when the tooth is stressed with a force meter. Lingual and buccal deflection of abutment tooth was measured using buccal and lingual pressure. The amount of force applied was 500gm. Tooth mobility tests were made at four key stages; 1. Before insertion of the first removable partial denture, baseline mobility was establsihed. 2. After wearing of the first prosthesis, measurement was made at weekly intervals for 4 weeks. 3. The removable partial denture was then taken from the patient, and tooth mobility was measured again at weekly intervals until the patient's established baseline mobility had returned. 4. The second prosthesis of different clasp design was worn for a month and evaluated in the same manner as the first. The sequence of placement of clasping system was alternated between patients. The following results were obtained from this study; 1. The mobility of abutment tooth increased during the initial stage of wear and returned to baseline mobility after removal of removable partial dentures. 2. The mobility of abutment tooth showed no difference between Akers clasp and I-bar clasp during the 4-week test period. 3. All teeth tested showed greater mobility toward the buccal than the lingual direction.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.23 no.2
• /
• pp.106-118
• /
• 2024

Interest in personal mobility has increased with the growing significance of first-mile and last-mile connectivity in smart mobility services. This study aims to propose a methodology for setting the service area of free-floating personal mobility sharing services and determining the optimal fleet size for the selected shared service area to address first-mile and last-mile challenges. We utilize population data, smart card data, and building data. Additionally, we estimate latent demand by incorporating age-specific and distance-specific utilization rates based on personal mobility device data. Along with the latent demand, we determine the service area based on locations of transit stops and buildings. We apply the proposed methodology to Yeongjong Island, Incheon. As a result, dense residential areas and popular beachside locations are designated as personal mobility sharing service areas. The fleet size for personal mobility in the dense residential service area is determined to be 1,022 units, while the fleet size for the beachside service area is set at 269 units.

• Journal of Preventive Medicine and Public Health
• /
• v.49 no.1
• /
• pp.53-60
• /
• 2016

Objectives: The purpose of this study is to examine the magnitude of and the factors associated with the downward mobility of first-episode psychiatric patients. Methods: This study used the claims data from the Korean Health Insurance Review and Assessment Service. The study population included 19 293 first-episode psychiatric inpatients diagnosed with alcohol use disorder (International Classification of Diseases, 10th revision [ICD-10] code F10), schizophrenia and related disorders (ICD-10 codes F20-F29), and mood disorders (ICD-10 codes F30-F33) in the first half of 2005. This study included only National Health Insurance beneficiaries in 2005. The dependent variable was the occurrence of downward mobility, which was defined as a health insurance status change from National Health Insurance to Medical Aid. Logistic regression analysis was used to assess factors associated with downward drift of first-episode psychiatric patients. Results: About 10% of the study population who were National Health Insurance beneficiaries in 2005 became Medical Aid recipients in 2007. The logistic regression analysis showed that age, gender, primary diagnosis, type of hospital at first admission, regular use of outpatient clinic, and long-term hospitalization are significant predictors in determining downward drift in newly diagnosed psychiatric patients. Conclusions: This research showed that the downward mobility of psychiatric patients is affected by long-term hospitalization and medical care utilization. The findings suggest that early intensive intervention might reduce long-term hospitalization and the downward mobility of psychiatric patients.

• Journal of Communications and Networks
• /
• v.11 no.4
• /
• pp.337-349
• /
• 2009

In this paper, we introduce a novel mobility model for mobile sinks in which the sinks move towards randomly distributed destinations, where each destination is associated with a mission. The novel mobility model is termed the random mobility with destinations. There have been many studies on mobile sinks; however, they merely support two extreme cases of sink mobility. The first case features the most common and general mobility, with the sinks moving randomly, unpredictably, and inartificially. The other case takes into account mobility only along predefined or determined paths such that the sinks can gather data from sensor nodes with minimum overhead. Unfortunately, these studies for the common mobility and predefined path mobility might not suit for supporting the random mobility with destinations. In order to support random mobility with destination, we propose a new protocol, in which the source nodes send their data to the next movement path of a mobile sink. To implement the proposed protocol, we first present a mechanism for predicting the next movement path of a mobile sink based on its previous movement path. With the information about predicted movement path included in a query packet, we further present a mechanism that source nodes send energy-efficiently their data along the next movement path before arriving of the mobile sink. Last, we present mechanisms for compensating the difference between the predicted movement path and the real movement path and for relaying the delayed data after arriving of the mobile sink on the next movement path, respectively. Simulation results show that the proposed protocol achieves better performance than the existing protocols.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.568-580
• /
• 2019

With mobility-as-a-service(MaaS) drawing attention to its influence and ripple effect around the world, the mobility service market is currently growing rapidly mainly focusing on mobility sharing. In order to preemptively dominate the mobility service market following the full-scale spread of MaaS, it is important to first identify the recognition and experience of users in personal mobility sharing services, which are currently in the early stages of diffusion, and through which to understand the characteristics of potential consumers of the extended mobility service market. Therefore, the study aims to classify the user types of mobility service and establish a future user experience-oriented mobility service strategy using a subjectivity study method, Q methodology.

• Journal of Preventive Medicine and Public Health
• /
• v.46 no.sup1
• /
• pp.50-54
• /
• 2013

Out-of-home mobility is necessary for accessing commodities, making use of neighborhood facilities, and participation in meaningful social, cultural, and physical activities. Mobility also promotes healthy aging as it relates to the basic human need of physical movement. Mobility is typically assessed either with standardized performance-based tests or with self-reports of perceived difficulty in carrying out specific mobility tasks. Mobility declines with increasing age, and the most complex and demanding tasks are affected first. Sometimes people cope with declining functional capacity by making changes in their way or frequency of doing these tasks, thus avoiding facing manifest difficulties. From the physiological point of view, walking is an integrated result of the functioning of the musculoskeletal, cardio-respiratory, sensory and neural systems. Studies have shown that interventions aiming to increase muscle strength will also improve mobility. Physical activity counseling, an educational intervention aiming to increase physical activity, may also prevent mobility decline among older people. Sensory deficits, such as poor vision and hearing may increase the risk of mobility decline. Consequently, rehabilitation of sensory functions may prevent falls and decline in mobility. To promote mobility, it is not enough to target only individuals because environmental barriers to mobility may also accelerate mobility decline among older people. Communities need to promote the accessibility of physical environments while also trying to minimize negative or stereotypic attitudes toward the physical activity of older people.

• The Journal of Korean Academic Society of Nursing Education
• /
• v.23 no.3
• /
• pp.353-362
• /
• 2017

Purpose: This study aimed to analyze the mobility of newly graduated nurses from regions where their nursing schools were located to regions where they took up their first jobs, and to identify factors influencing nurses' mobility. Methods: Data from the Graduates Occupational Mobility Survey, collected annually from 2010 to 2014 by the Korea Employment Information Service, were analyzed. The sample consisted of 1,488 graduates and 1,229 nurses who were employed on a full-time basis in hospitals. Multiple logistic regression analysis was conducted to identify factors associated with geographic mobility. Results: Among the nurses working in hospitals, 69.2% had their first jobs in their nursing school regions and 11.3% in their high school regions. Fifty-two percent of the nurses worked in the capital region; 47.2% thereof had moved from a non-capital region. Nurses were more likely to work in their nursing school region when they were female, were older, graduated from a high school located in their nursing school region, graduated from a college (vs. university), had a lower nursing school performance, and expected lower monthly wage, compared with those who left their nursing school region. Conclusion: Education and remuneration policies are required to reduce geographical mobility to the capital region.

• Hip & pelvis
• /
• v.35 no.4
• /
• pp.277-280
• /
• 2023

Dislocation after a total hip arthroplasty occurs in approximately 1% of patients; however, the frequency is much higher after revision surgery. To prevent dislocation, use of a larger femoral head is recommended, and a dual mobility femoral head has been introduced. However, reducing the dual mobility femoral head to the acetabular component is difficult in cases involving contracture in the soft tissue around the joint. A 72-year-old male patient who developed a periprosthetic joint infection underwent two-stage revision surgery using MUTARS^®. Two months after the revision, the hip joint became dislocated and manual reduction was attempted; however, dislocation occurred again. During another revision using a dual mobility bearing, the soft tissue around the hip joint was too tight to reduce. The problem was overcome by first repositioning the dual mobility head into the acetabular socket, followed by assembly of the diaphyseal portion of the implant.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.6
• /
• pp.2180-2200
• /
• 2015

This paper considers mobility control to improve packet delivery in delay-tolerant networks (DTNs) under group mobility. Based on the group structure in group mobility, we propose two mobility control techniques; group formation enforcement and group purposeful movement. Both techniques can be used to increase the contact opportunities between groups by extending the group's reachability. In addition, they can be easily integrated into some existing DTN routing schemes under group mobility to effectively expedite the packet delivery. This paper is divided into 2 parts. First, we study how our proposed mobility control schemes reduce the packet delivery delay in DTNs by integrating them into one simple routing scheme called group-epidemic routing (G-ER). For each scheme, we analytically derive the cumulative density function of the packet delivery delay to show how it can effectively reduce the packet delivery delay. Then, based on our second proposed technique, the group purposeful movement, we design a new DTN routing scheme, called purposeful movement assisted routing (PMAR), to further reduce the packet delay. Extensive simulations in NS2 have been conducted to show the significant improvement of PMAR over G-ER under different practical network conditions.