• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.84-89
• /
• 2007

In this paper, we introduce a new technique for automatic construction of steel frames in high-rise buildings. Basically, we combine advanced robotic technologies to building construction techniques. Four main topics will be developed such as: 1) Planning and synthesis of automatic construction system, 2) Development of construction factory system with climbing oil-pressured robot, 3) Core techniques for automatic assembly for steel frames, and 4) Intelligent resource management system. We expect that this new technique will increase the construction efficiency and will alleviate the manpower shortage problem in the aging society.

• Proceedings of the KAIS Fall Conference
• /
• 2004.11a
• /
• pp.157-159
• /
• 2004

오늘날 자동화 산업 부분에서 원격 제어 및 모니터링은 유지 보수가 쉽고 시간적 공간적으로 많은 효율성을 기대할 수 있기 때문에 중요한 부분을 차지하고 있다. 그러나 네트워크 환경이 미처 구비되지 못한 산업 현장에서 전용 장비나 전용 라인을 사용하여 네트워크 환경을 추가로 구축하려 한다면 큰 경제적 부담이 될 수 있다. 하지만 나날이 성능이 향상되고 있는 일반 PC를 사용한다면 상대적인 비용의 절감 효과를 기대 할 수 있다. 본 논문에서는 3축의 Motion Control System을 구성하여 현재 산업 현장에서 주로 쓰이는 Manipulator의 기본적인 환경을 구현하고 LabVIEW를 이용하여 별도의 네트워크 전용 장비 없이 일반 PC에서 무선 인터넷을 통하여 실시간으로 모니터링 및 제어를 할 수 있게 하였고, 나아가 인터넷상에서 원격제어의 가능성을 활용하여 산업체에서의 활용범위를 넓히고, 가상 교육환경의 가능성을 열었다.

• Journal of Biosystems Engineering
• /
• v.33 no.3
• /
• pp.186-195
• /
• 2008

In this paper, a prototype tele-operative system with a mobile base was developed in order to automate cultivation of house melon. A man-machine interactive hybrid decision-making system via tele-operative task interface was proposed to overcome limitations of computer image recognition. Identifying house melon including position data from the field image was critical to automate cultivation. And it was not simple especially when melon is covered partly by leaves and stems. The developed system was composed of 5 major modules: (a) main remote monitoring and task control module, (b) wireless remote image acquisition and data transmission module, (c) three-wheel mobile base mounted with a 4 dof articulated type robot manipulator (d) exchangeable modular type end tools, and (e) melon storage module. The system was operated through the graphic user interface using touch screen monitor and wireless data communication among operator, computer, and machine. Once task was selected from the task control and monitoring module, the analog signal of the color image of the field was captured and transmitted to the host computer using R.F. module by wireless. A sequence of algorithms to identify location and size of a melon was performed based on the local image processing. Laboratory experiment showed the developed prototype system showed the practical feasibility of automating various cultivating tasks of house melon.

• The Journal of Korea Robotics Society
• /
• v.6 no.2
• /
• pp.130-140
• /
• 2011

This paper proposes an optimal posture for the task-oriented movement of dual arm manipulator. A stability criterion function which consists of three kinds of feature-representative parameters has been utilized to define the optimal posture. The first parameter is the force which is applied to the object. The torque of each joint and position of arm are attained from the current sensor and encoder, respectively. From these two data, the applied force to an object is estimated using sum of vectors of the joint torques estimated from the measured current. In order to investigate the robustness of each posture, the variation of the end-effector from the encoder information has been utilized as the second parameter. And for the last parameter for the optimality, the total energy consumption has been used. The total consuming energy of each posture can be computed from the current information and the battery voltage. The proposed robot structure consists of a mobile inverted pendulum and dual manipulators. In order to define the optimal posture for the each object, external disturbances are applied to the mobile inverted pendulum robot and the first and second parameters are investigated to find the optimal posture among the pre-selected most representative postures. Finally, the proposed optimal posture has been verified by the proposed stability criterion function which consists of total force to the object, the fluctuation of the end-effector position, and total energy consumption. The effectiveness of the proposed algorithms has been verified and demonstrated through the practical simulations and real experiments.

• Proceedings of the KIEE Conference
• /
• 2011.07a
• /
• pp.131-132
• /
• 2011

현 시대는 로봇의 시대라 할 만큼 다채로운 로봇들이 개발되고 있으며, 인간의 기능들을 본 떠 만든 로봇 암(Robot arm: manipulator)과 워킹로봇(Walking robot: biped robot, quadruped robot, popping robot, etc.)물체인식 및 물체 추적 로봇(Tracking robot with image processing -. Domo robot, MIT.)이나 곤충과 동물 등의 생체 로봇에 대한 개발 또한 진행하고 있다. 지능형 이동로봇에서 가장중요하고 기본이 되는 기술인 무선통신망을 이용한 통신 기술과 지표면을 걷는 워킹로봇이 아닌 개활지나 밀폐된 공간에서 주행이 자유롭고 속도 및 주변 반응에 대해서 즉시 반응할 수 있는 장점을 가져 개발이용이한 바퀴를 이용한 2축 이동로봇에 관하여 연구하였다. 본 연구는 무선통신망을 이용하여 인터넷이 되는 곧 이면 어디서든 원격제어를 통하여 이동로봇을 전진, 후진, 좌회전. 우회전 및 속도제어 위치제어를 할 수 있고 GPS로 로봇의 위치와, 카메라를 이용하여 영상자료를 수집하고 센서를 이용하여 장애물 감지 및 자율주행 하는 등 여러 분야에 응용 할 수 있는 로봇을 연구하였다.

• The Journal of Korea Robotics Society
• /
• v.15 no.4
• /
• pp.375-384
• /
• 2020

Today's robots consist of many hardware and software subsystems, depending on the functions needed for specific tasks. Integration of subsystems can require a great deal of effort, as both the communication method and protocol of the subsystem can vary. This paper proposes an expandable robotic system in which all subsystems are integrated under Robot Operation System (ROS) framework. To achieve this, the paper presents a software library, ROS_M, developed to implement the TCP/IP-based ROS communication protocol in different control environments such as MCU and RT kernel based embedded system. Then, all the subsystem including hardware can use ROS protocol consistently for communication, which makes adding new software or hardware subsystems to the robotic system easier. A latency measurement experiment reveals that the system built for loop control can be used in a soft real-time environment. Finally, an expandable mobile manipulator robot is introduced as an application of the proposed system. This robot consists of four subsystems that operate in different control environments.

• The Journal of Korea Robotics Society
• /
• v.15 no.1
• /
• pp.48-54
• /
• 2020

Home robot arms require a payload of 2 kg to perform various household tasks; at the same time, they should be operated by low-capacity motors and low-cost speed reducers to ensure reasonable product cost. Furthermore, as robot arms on mobile platforms are battery-driven, their energy efficiency should be very high. To satisfy these requirements, we designed a lightweight counterbalance mechanism (CBM) based on a spring and a wire and developed a home robot arm with five degrees of freedom (DOF) based on this CBM. The CBM compensates for gravitational torques applied to the two pitch joints that are most affected by the robot's weight. The developed counterbalance robot adopts a belt-pulley based parallelogram mechanism for 2-DOF gravity compensation. Experiments using this robot demonstrate that the CBM allows the robot to meet the above-mentioned requirements, even with low-capacity motors and speed reducers.

• Journal of Mechanical Science and Technology
• /
• v.19 no.10
• /
• pp.1864-1874
• /
• 2005

This paper describes a wearable multi-modal user interface design and its implementation for a teleoperated field robot system. Recently some teleoperated field robots are employed for hazard environment applications (e.g. rescue, explosive ordnance disposal, security). To complete these missions in outdoor environment, the robot system must have appropriate functions, accuracy and reliability. However, the more functions it has, the more difficulties occur in operation of the functions. To cope up with this problem, an effective user interface should be developed. Furthermore, the user interface is needed to be wearable for portability and prompt action. This research starts at the question: how to teleoperate the complicated slave robot easily. The main challenge is to make a simple and intuitive user interface with a wearable shape and size. This research provides multi-modalities such as visual, auditory and haptic sense. It enables an operator to control every functions of a field robot more intuitively. As a result, an EOD (explosive ordnance disposal) demonstration is conducted to verify the validity of the proposed wearable multi-modal user interface.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.6
• /
• pp.853-860
• /
• 2014

This paper introduces a Korean rescue robot and presents a whole body kinematic control strategy. The mission of the rescue robot is to move and lift patients or soldiers with impaired mobility in the battlefields, hospitals and hazardous environments. In order for a robot to rescue and assist humans, reliable mobility in various environments, large load carrying capacity, and dextrous manipulability are required. For these objects the robot has variable configuration mobile platform with tracks, dual arm manipulator, and two types of grippers. The electric actuators provide the strength to lift a wounded soldier up to 120 kg using whole body joints. To control the robot with multi degree of freedom, we need to synthesize complex whole-body behaviors, and to manage multiple task primitives systematically. We are to present a whole body kinematic control methodology, and demonstrate its effectiveness through numerical simulations.

• Journal of the Korea Society for Simulation
• /
• v.26 no.4
• /
• pp.35-41
• /
• 2017

With the advances in Internet over Things, the demand in diverse electronic devices such as mobile phones and sensors has been rapidly increasing and boosting up the researches on those products. Semiconductor materials, devices, and fabrication processes are becoming more diverse and complicated, which accompanies finding parameters for an optimal fabrication process. In order to find the parameters, a process simulation before fabrication or a real-time process control system during fabrication can be used, but they lack incorporating the feedback from post-fabrication data and compatibility with older equipment. In this research, we have developed an artificial intelligence based simulator, which finds parameters for an optimal process and controls process equipment. In order to apply the control concept to all the equipment in a fabrication sequence, we have developed a prototype for a manipulator which can be installed over an existing buttons and knobs in the equipment and controls the equipment communicating with the AI over the Internet. The AI is based on the deep learning to find process parameters that will produce a device having target electrical characteristics. The proposed simulator can control existing equipment via the Internet to fabricate devices with desired performance and, therefore, it will help engineers to develop new devices efficiently and effectively.