• Transactions of Materials Processing
• /
• v.20 no.3
• /
• pp.193-205
• /
• 2011

Because of its rustproof property, stainless steel is widely used in kitchen appliances, building materials, electronics, chemical plants and automobile exhausts. In addition, the utilization of stainless steel for fuel cell application is growing. As the demand for this material increases, it is necessary to study the basic properties of stainless steel such as corrosion resistance, heat transfer, formability, cutting or shearing ability and weldability. In this article, the mechanical properties, formability and press forming performance of stainless steel are reviewed. Since temperature and strain rate affect the press forming performance of STS304(austenitic) stainless steel, the influence of these parameters on the plastic behavior should be investigated. Moreover, measures for the prevention of ridging of STS430(ferritic) and delayed fracture of STS430, which respectively appear during and after press forming, should be considered. Recently, stainless steel sheets with a thickness lower than 0.2 mm have been widely used in applications for mobile phone, digital camera and fuel cell separator. Therefore, there is a growing interest of studying the grain size effect and plasticity at the crystal scale in order to understand the anisotropic behavior and micro forming ability of thin sheets. This review paper was written with the objective of helping engineers and researchers to understand the forming characteristics of stainless steel and to establish standards in plastic forming techniques.

• Journal of IKEEE
• /
• v.22 no.2
• /
• pp.350-355
• /
• 2018

In this paper, a system that can classify the objects in the image according to their sizes using the reference points is proposed. The object is studied with samples. The proposed system recognizes and classifies objects by the size in images acquired using a mobile phone camera. Conventional object recognition systems classify objects using only object size. As the size of the object varies depending on the distance, such systems have the disadvantage that an error may occurs if the image is not acquired with a certain distance. In order to overcome the limitation of the conventional object recognition system, the object recognition system proposed in this paper can classify the object regardless of the distance with comparing the size of the reference point by placing it at the upper left corner of the image.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.5
• /
• pp.73-79
• /
• 2011

With increasing use of smartphone, users require a new message service to prevent security attack and provide integrated messages. Since smartphone uses data services such as 3G cell network and WiFi, it can provide reliable message transfer through various security policies. In addition, it can transfer various data collected using built-in camera and GPS. This paper proposes a smart message service platform which can provide security services such as authentication, confidentiality and integrity as well as transfer the integrated message including location, picture and text. To verity the functionality of the platform, this paper implements an iPhone app and message transfer server, and then shows the implementation results.

• Journal of Korea Multimedia Society
• /
• v.15 no.8
• /
• pp.986-995
• /
• 2012

In this paper we propose a real-time moving object tracking method on a smart phone camera. By considering the limit of non-learning approach on low-performance platforms, we use the sliding-window detection technique based on histogram features. We solve the problem of the time-consuming histogram computation on each sub-window by adapting the integral histogram. For additional speed and tracking performance, we propose a new adaptive bin method. From the experiments on our dataset, we achieved high speed performance demonstrating 34~63 frames per second.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.3_1spc
• /
• pp.607-614
• /
• 2013

This paper proposes a robot driving system and sensor implementation for use with an education robot. This robot has multiple functions and was designed so that children could use it with interest and ease. The robot recognizes the location of a user and follows that user at a specific distance when the robot and user communicate with each other. In this work, the robot was designed and manufactured to evaluate its performance. In addition, an embedded board was installed with the purpose of communicating with a smart phone, and a camera mounted on the robot allowed it to monitor the environment. To allow the robot to follow a moving user, a set of sensors combined with an RF module and ultrasonic sensors were adopted to measure the distance between the user and the robot. With the help of this ultrasonic sensors arrangement, the location of the user couldbe identified in all directions, which allowed the robot to follow the moving user at the desired distance. Experiments were carried out to see how well the user's location could be recognized and to investigate how accurately the robot trackedthe user, which eventually yielded a satisfactory performance.

• Journal of Digital Convergence
• /
• v.10 no.11
• /
• pp.331-335
• /
• 2012

Many researches have been performed the analysis and experiments on auto-focus lens due to the development of camera module which is used in mobile-phone recently. Various types of voice coil motor are used mostly in the view point of actuators. Various type of magnetic flux flow is made by the combination of magnet, coil and yoke, etc. And the function of auto-focus is made by the proper combination of the lens components. In this research, some of the simple and economic structure is chosen to investigate the characteristics analytically among various types of lens which are used in industries. Desired level of lens module design was achieved by electromagnetic analysis using ANSYS$^{TM}$ finite element analysis program.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.1048-1050
• /
• 2013

Mobile devices or smartphones are rapidly becoming the central computer and communication network device. Recently, smartphones are programmable and come with a growing set of cheap powerful embedded sensors, such as an accelerometer, digital compass, gyroscope, GPS, microphone, and camera. In this paper, we discuss the wireless gas sensing service architectural and develope the gas sensor monitoring services using smartphone and web server.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.7
• /
• pp.1421-1426
• /
• 2003

In this paper, we implement a picture surveillance system using IBM-compatible PC with web camera. The reflex RGB data captured from WebCam is stored to HDD through USB port at every 5 seconds intervals. Also, if strangers are detected through Motion Detection routine, warning voice message is broadcasted and invasion message is transmitted by e-mail and transmit the e-mail title to mobile phone through WAP(Wireless Application Protocol) push. The detected image is stored to hard-disk in ‘month-day-hour-minute-second. jpg’ data type. And the image data is transmitted to web server through FTP(File Transfer Protocol) because invader can deletes or destroys the image data on hard-disk We implement a surveillance system which is able to utilize through internet regardless of time and space.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.1853-1855
• /
• 2005

본 논문에서는 카메라폰용 광학줌(Optical zooming)과 자동초점조절장치(Auto Focusing, AF)에 쓰일 초음파모터를 제작하였다. 초음파모터의 제작 및 시뮬레이션은 유한요소해석 프로그램인 ATILA 5.2.1(Magsoft)를 사용하여 디자인설계에 따른 구동특성을 고찰하였고 세자된 초음파모터는 한쪽 면이 없는 사자형의 탄성체를 제작하였으며 탄성체의 양쪽 다리에 각각 압전체를 부착하였다. 또한 압전세라믹의 조성은 $0.9Pb(Zr_{0.51}Ti_{0.49})O_3$-$0.1Pb(Mn_{1/3}Nb_{1/3}Sb_{1/3})O_3$의 조성으로 설계하였고 시편의 제조는 7-layer로 적층하였다. 제작된 압전세라믹의 치수는 $6*2*0.35mm^3$ (길이*폭*두께)로 제작하였다. 또한 탄성체의 외형치수는 $10*10*2mm^3$ 제작하였으며 두께를 각각 0.3[mm], 0.5[mm], 0.8[mm]으로 변화시키며 제작하였다. 두께가 0.8[mm]인 경우 공진주파수 60.5[kHz]를 나타내었으며 초음파모터의 압전세라믹에 인가전압이 증가함에 따라 회전속도와 모터에 흐르는 전류는 증가하였다. 인가전압이 40[Vpp], 공진주파수는 60.5[kHz]일때 무게추를 달고 그때의 토크 및 효율을 측정하였다. 회전 속도는 토크가 증가함에 따라 거의 선형적으로 감소하였으며 효율은 토크에 따라 증가하다가 토크가 약 20(mNmm)일 때 약 28[%]로 최대치를 나타내었다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.643-646
• /
• 2009

The reality is that forms and roles of media is changing as our society goes forward fast. There aren't any other noticeable media forms than one man media UCC(User Created Contents). Not only almost all of the house hold a camera at least one, but people can take a picture by using their mobile phone. Furthermore, people can produce a movie through taken pictures in this time. That is the beginning of UCC. It is possible to make use of private life, company, society, advertisement, shopping mall, and so on.