• 제목/요약/키워드: Mobile Application Mode

검색결과 92건 처리시간 0.021초

모바일용 White-LED Driver IC (A White-LED Driver IC for Mobile Applications)

  • 고영석;박시홍
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 춘계학술대회 논문집
    • /
    • pp.39-40
    • /
    • 2009
  • This paper presents a white-LED driver IC for a mobile application. It uses a high efficiency current mode boost converter method for a low voltage application. For a LED drive, it provides a PWM(Pulse Width Modulation) and analog dimming function. The device was designed and fabricated using 0.35um BCD process. The evaluated waveforms for an implemented IC show promising results.

  • PDF

WSN 기반 국경 감시 및 제어 시스템 설계 (Design of Border Surveillance and Control System Based on Wireless Sensor Network)

  • 황보람;안순신
    • 정보처리학회논문지:컴퓨터 및 통신 시스템
    • /
    • 제4권1호
    • /
    • pp.11-14
    • /
    • 2015
  • 저전력 기술에 기반한 무선 센서 네트워크 (Wireless Sensor Networks, WSN) 기술은 유비쿼터스 사회에서 핵심 기술 중 하나이다. 본 논문에서는 WSN환경에서의 국경 감시 및 제어 시스템을 제안한다. 시스템은 고정 센서노드, 모바일 센서노드, 고정 게이트웨이, 모바일 게이트웨이, 서버, 모바일 애플리케이션으로 구성된다. 이 시스템의 유용성은 모바일 애플리케이션은 사용자모드와 관리자모드로 나뉘어, 일반 사람들도 시간과 공간의 제약 없이 스마트폰을 통해 국경 침범을 감시하고 국경 망 환경에 대한 데이터를 얻을 수 있다. 관리자모드에서는 노드들의 유동적 작동을 위해 관리자가 원격으로 소프트웨어 업데이트를 할 수 있고, 모바일 노드의 위치를 조정할 수 있다. 또한 저전력 센서노드의 확장성을 위해 시스템에 적합한 멀티 홉 라우팅 프로토콜을 적용하여 구현하였으며 제안한 시스템이 한정된 자원과 저사양의 하드웨어로 동작하는 WSN환경에서도 신속하고 정확하게 동작함을 확인하였다.

모바일용 White-LED Driver IC에 관한 연구 (A Study of White-LED Driver IC for Mobile Applications)

  • 고영석;박시홍
    • 한국전기전자재료학회논문지
    • /
    • 제22권7호
    • /
    • pp.572-575
    • /
    • 2009
  • In this study, we proposed WLED(White-Light Emitting Diode) driver IC for mobile applications. This IC drove WLED for mobile applications with low input voltage and high efficiency by using boost converter. The device was designed by using boost converter applied current-mode control algorithm and provided PWM(Pulse Width Modulation) & analog dimming. Designed IC consisted of bias block, drive block, control block, protection block. We confirmed this device worked well through a application PCB (Printed Circuit Board) test.

Application to Stabilizing Control of Nonlinear Mobile Inverted Pendulum Using Sliding Mode Technique

  • ;;;;김상봉
    • 한국해양공학회지
    • /
    • 제23권2호
    • /
    • pp.1-7
    • /
    • 2009
  • This paper presents a sliding mode controller based on Ackermann's formula and applies it to stabilizing a two-wheeled mobile inverted pendulum in equilibrium. The mobile inverted pendulum is a system with an inverted pendulum on a mobile cart. The dynamic modeling of the mobile inverted pendulum was established under the assumptions of a cart with no slip and a pendulum with only planar motion. The proposed sliding mode controller was based upon a class of nonlinear systems whose nonlinear part of the modeling can be linearly parameterized. The sliding surface was obtained in an explicit form using Ackermann's formula, and then a control law was designed from reachability conditions and made the sliding surface attractive to the equilibrium state of the mobile inverted pendulum. The proposed controller was implemented in a Microchip PIC16F877 micro-controller. The developed overall control system is described. The simulation and experimental results are presented to show the effectiveness of the modeling and controller.

The Effects of Multi-Modality on the Use of Smart Phones

  • Lee, Gaeun;Kim, Seongmin;Choe, Jaeho;Jung, Eui Seung
    • 대한인간공학회지
    • /
    • 제33권3호
    • /
    • pp.241-253
    • /
    • 2014
  • Objective: The objective of this study was to examine multi-modal interaction effects of input-mode switching on the use of smart phones. Background: Multi-modal is considered as an efficient alternative for input and output of information in mobile environments. However, there are various limitations in current mobile UI (User Interface) system that overlooks the transition between different modes or the usability of a combination of multi modal uses. Method: A pre-survey determined five representative tasks from smart phone tasks by their functions. The first experiment involved the use of a uni-mode for five single tasks; the second experiment involved the use of a multi-mode for three dual tasks. The dependent variables were user preference and task completion time. The independent variable in the first experiment was the type of modes (i.e., Touch, Pen, or Voice) while the variable in the second experiment was the type of tasks (i.e., internet searching, subway map, memo, gallery, and application store). Results: In the first experiment, there was no difference between the uses of pen and touch devices. However, a specific mode type was preferred depending on the functional characteristics of the tasks. In the second experiment, analysis of results showed that user preference depended on the order and combination of modes. Even with the transition of modes, users preferred the use of multi-modes including voice. Conclusion: The order of combination of modes may affect the usability of multi-modes. Therefore, when designing a multi-modal system, the fact that there are frequent transitions between various mobile contents in different modes should be properly considered. Application: It may be utilized as a user-centered design guideline for mobile multi modal UI system.

면허기반 주파수 공동 사용을 위한 멀티모드 단말기 설계 및 구현 (Design and Implementation of Multi-mode Mobile Device for supporting License Shared Access)

  • 김용;최승원
    • 디지털산업정보학회논문지
    • /
    • 제12권4호
    • /
    • pp.81-87
    • /
    • 2016
  • Recently, as the heterogeneous network (HetNet) has been deployed widely to support various kinds of Radio Access Networks(RANs) with a combination of Macro, Pico, and/or Femto cells, research and standardization efforts have been very active regarding the concept of Licensed Shared Access (LSA) for supporting spectrum sharing. In order for a mobile device to efficiently support the spectrum sharing, the mobile device shall be reconfigurable, meaning that its radio application code has to be adaptively changed in accordance with the hopping of desired spectral band. Especially, Working Group 2 (WG2) of Technical Committee (TC) Reconfigurable Radio System (RRS) of European Telecommunications Standards Institute (ETSI) has been a main driving force for developing standard architecture for Multi-mode Mobile Device (MD) that can be applied to the LSA system. In this paper, we introduce the Multi-mode MD architecture for supporting LSA-based spectrum sharing. An implementation of a test-bed of Multi-mode MD is presented in order to verify the feasibility of the standard MD architecture for the purpose of LSA-based spectrum sharing through various experimental tests.

모바일 뱅킹 정보시스템의 소프트웨어 보안성 개선을 위한 고장 트리 분석과 고장 유형 영향 분석 (Fault Tree Analysis and Failure Mode Effects Analysis for Software Security Improvements in Mobile Banking Information Systems)

  • 김소영;김명희;박만곤
    • 한국멀티미디어학회논문지
    • /
    • 제18권11호
    • /
    • pp.1342-1350
    • /
    • 2015
  • Due to rapid development of mobile device technologies, the mobile banking through Internet has become a major service of banking information systems as a security-critical information systems. Recently, lots of mobile banking information systems which handle personal and transaction information have been exposed to security threats in vulnerable security control and management processes, mainly software systems. Therefore, in this paper, we propose a process model for software security improvements in mobile banking information system by application of fault tree analysis(FTA) and failure modes and effects analysis(FMEA) on the most important activities such as 'user authentication' and 'access control' and 'virus detection and control' processes which security control and management of mobile banking information systems are very weak.

모바일기기의 동작모드와 대기모드를 모두 고려한 저전력 3차원 그래픽 가속기 (A Low Power 3D Graphics Accelerator Considering Both Active and Standby Modes for Mobile Devices)

  • 김영식
    • 한국정보과학회논문지:시스템및이론
    • /
    • 제34권2호
    • /
    • pp.57-64
    • /
    • 2007
  • 본 논문에서는 모바일 3D 그래픽 가속기의 저전력 텍스쳐 캐쉬 구조를 제안하였다. 모바일 3D 그래픽 가속기는 동작모드에서 대규모 메모리 접근이 필요한 텍스쳐 매핑의 메모리 지연시간을 감소하고 대기모드에서 누설 전력소비를 줄이는 것이 매우 중요하다. 제안하는 텍스쳐 캐쉬 구조는 응용 프로그램의 텍스쳐 필터링 알고리즘에 따라서 가변적인 전력 모드 전환 기준으로 동작하여 누설전력을 줄이고 동작시간의 이득을 얻는다. 제안한 구조의 성능 검증을 위하여 트레이스 기반 텍스쳐 캐쉬 시뮬레이션을 수행하여 누설전력과 수행시간을 모두 고려한 성능 척도에서 이전 연구인 MSA 캐쉬보다 최대 7%의 성능 이득을 얻었다.

운전 중 휴대폰 사용 방지 모듈 및 애플리케이션 (Module and Application to Prevent Cell Phone Use While Driving)

  • 강현아;이인정;이윤호;전주현;최원근;주문갑
    • 대한임베디드공학회논문지
    • /
    • 제14권3호
    • /
    • pp.143-150
    • /
    • 2019
  • In this paper, we have developed a module that prevents a driver from using mobile phone while driving. The module is equipped with a vibration sensor to determine if the vehicle is running, a BLE module to transmit the status of the module and a speaker to transmit audible/unaudible sound to the mobile terminal where GUI application is installed. If the vehicle is judged to be moving, the application is activated and the touch function of the mobile phone is blocked. Other data are also transmitted depending on the state of the module, which informs forced module removal, battery failure, or sleep mode of the module.

Dual Mode OLED for mobile application

  • Redecker, M.;Fischer, J.;Kim, S.W.;Chung, H.K.
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2004년도 Asia Display / IMID 04
    • /
    • pp.805-807
    • /
    • 2004
  • Dual Mode technology has been developed as a new technology that allows to use a self-emissive display under full sunlight conditions. The new technology connects a LCD-like remissive operation mode in sunlight to an OLED-like self-emissive operation in the dark In the recent years, the focus of development has shifted towards the possibility of full colour operation.

  • PDF