• Korean Journal of Materials Research
• /
• v.18 no.6
• /
• pp.294-297
• /
• 2008

In this paper, a novel non-vacuum technique is described for the fabrication of a $CuInSe_2$ (CIS) absorber layer for thin film solar cells using a low-cost precursor solution. A solution containing Cu- and Inrelated chemicals was coated onto a Mo/glass substrate using the Doctor blade method and the precursor layer was then selenized in an evaporation chamber. The precursor layer was found to be composed of CuCl crystals and amorphous In compound, which were completely converted to chalcopyrite CIS phase by the selenization process. Morphological, crystallographic and compositional analyses were performed at each step of the fabrication process by SEM, XRD and EDS, respectively.

• Women's Health Nursing
• /
• v.27 no.3
• /
• pp.196-208
• /
• 2021

Purpose: This study aimed to test the efficacy of a nurse-led postpartum self-care (NLPPSC) intervention at reducing postpartum fatigue (PPF) and depressive mood and promoting maternal functioning among first-time mothers in Bangladesh. Methods: A non-synchronized quasi-experimental design was used. First-time mothers were recruited during postpartum and assigned to the experimental or control group (34 each). The experimental group received the NLPPSC in the hospital, a 1-day intervention that focused on increasing self-efficacy. The control group received usual care. Data on PPF, depressive mood, maternal functioning, self-care behaviors, postpartum self-efficacy, and self-care knowledge were collected at postpartum 2 weeks (attrition 23.5%) and 6 weeks (attrition 16.1%). Data were analyzed using descriptive statistics, bivariate statistics, and linear mixed model analysis. Results: One-third (33.3%) of new mothers experienced depressive mood (Edinburgh Postnatal Depression Scale scores of ≥13 points). The NLPPSC intervention was statistically significant in decreasing PPF (β=-6.17, SE=1.81, t=-3.39, p<.01) and increased maternal functioning at postpartum 6 weeks in the experimental group (β=13.72, t=3.73, p<.01) compared to the control. Knowledge was also statistically significant for increased maternal functioning over time (β=.37, SE=.18, t=2.03, p<.05). However, there were no statistically significant differences in depressive mood over time. Conclusion: The NLPPSC intervention was feasible and effective in improving fatigue and maternal functioning in Bangladeshi mothers by postpartum 6 weeks and thus supports implementing the NLPPSC intervention for new mothers after childbirth.

• Journal of the Mineralogical Society of Korea
• /
• v.27 no.1
• /
• pp.31-40
• /
• 2014

In present study, we geochemically investigated the fresh coal ashes and the saline ash pond of an electric power plant in Korea, which burns imported bituminous coals. The goals are to see the chemical changes of the ash pond by reaction with coal ashes and to investigate the relative leachability of elements from the ashes by reaction with saline waters. For this study, one fresh fly ash, one fresh bottom ash, and 7 water samples were collected. All the ash samples and 2 water samples were analyzed for 55 elements. The results indicated that the fly ashes are enriched with chalcophilic elements such as Cu, Zn, Ga, Ge, Se, Cd, Sb, Au, Pb, and B relative to other elements. On the other hand, concentrations of As, Ba, Co, Ga, Li, Mn, Mo, Sb, U, V, W, and Zr are much higher in the ash pond than those dissolved in the seawater. Ag, Bi, Li, Mo, Rb, Sb, Sc, Se, Sn, Sr, and W show high ratios of elemental concentrations in pond water to those in the fly ash. Our results imply that the leaching of trace elements is regulated by geochemical controls such as solubility and adsorption even though the trace elements are relatively enriched on the ash surfaces after the coal combustion due to their volatilities.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.23 no.2
• /
• pp.108-113
• /
• 2013

Chalcopyrite material $CuInSe_2$ (CIS) is known to be a very prominent absorber layer for high efficiency thin film solar cells. Current interest in the photovoltaic industry is to identify and develop more suitable materials and processes for the fabrication of efficient and cost-effective solar cells. Various processes have been being tried for making a low cost CIS absorber layer, this study obtained the CIS nanoparticles using commercial powder of 6 mm pieces for low cost CIS absorber layer by high frequency ball milling and cryogenic milling. And the CIS absorber layer was prepared by paste coating using milled-CIS nanoparticles in glove box under inert atmosphere. The chalcopyrite $CuInSe_2$ thin films were successfully made after selenization at the substrate temperature of $550^{\circ}C$ in 30 min, CIS solar cell of Al/ZnO/CdS/CIS/Mo structure prepared under various deposition process such as evaporation, sputtering and chemical vapor deposition respectively. Finally, we achieved CIS nanoparticles solar cell of electric efficient 1.74 % of Voc 29 mV, Jsc 35 $mA/cm^2$ FF 17.2 %. The CIS nanoparticles-based absorber layers were characterized by using EDS, XRD and HRSEM.

• Journal of the Korean institute of surface engineering
• /
• v.44 no.6
• /
• pp.264-268
• /
• 2011

The Molybedenium thin film is generally used on back contact material of CIGS solar cell due to low electrical resistivity and stable thermal expansion coefficient. The Mo thin films deposited on si wafer by the magnetron sputtering method. The research focused on the variation of electrical resistivity of films which deposited with various working pressure at the target power of 2.0 kW(8.4 W/). The lowest resistivity of Mo thin film showed $9.0{\mu}O$-cm at pressure of 1.5 mTorr. However, working pressure increasing up to 50 mTorr, resistivities were highly increased. The results showed that the conductivity of Mo films depended on growing structures and defects in deposition process. Surface morphology, porosity, grain size, oxidation, and bonding structures were analysed by SEM, AFM, spectroscopic ellipsometry (SE), XRD, and XPS.

• Current Photovoltaic Research
• /
• v.5 no.4
• /
• pp.140-144
• /
• 2017

$CuSbS_2$ (CAS) and $CuSbSe_2$ (CASe) nanocrystals (NCs), which consist of earth-abundant elements, were synthesized by a mechanochemical method. Elemental precursors such as copper, antimony, sulfur, and selenium were used without adding any organic solvents or additives. The NCs were synthesized by milling for a few hours. The sudden phase changes occurred by self-ignition and propagation, as previously observed in other mechanochemical synthetic processes. The XRD, Raman, and TEM analysis were carried out to determine the crystallinity and secondary phase of the as-synthesized CAS and CASe NCs, confirming the phase-pure synthesis of CAS and CASe. Optical properties were investigated by UV-Vis spectroscopy and it was observed that the band gap energies were about 1.1 and 1.5 eV, respectively for CAS and CASe, suggesting the potential for the use as solar cell materials. The NC colloids dispersed in anhydrous ethanol were prepared and coated on Mo substrates by a facile doctor-blade method. The investigation on the solar cell properties of the as-synthesized materials is underway.

• 한국신재생에너지학회:학술대회논문집
• /
• 2007.06a
• /
• pp.313-316
• /
• 2007

본 연구에서는 Cu와 In 성분을 포함하는 메탄올 용액을 닥터 블레이딩 방법으로 코팅한 후 이를 Se Evaporator 열처리하여 CIS 광흡수층을 제조하였다. $Cu(NO_{3})_{2}$, $INCl_{3}$ 를 출발 물질로 선정하고, 이를 메탄올 용매에 녹여 전구체 용액을 만든 후, 여기에 유기물 바인더 물질을 첨가하여 닥터 블레이드 코팅에 적합한 점도를 맞춘 후, 이를 Mo/glass 기판에 코팅하였다. 코팅된 Cu, In 함유 유기물 혼합체를 공기중에서 1차 열처리 한 후 Evaporator 를 이용해 Selenization 하여 태양전지용 CIS 광흡수층을 만들었다. 본 연구에서는 전구체 합성, 유기물 첨가, 공기중 열처리 및 Se 열처리 각 단계에서 광흡수층 막의 형상, 결정구조, 화학조성의 변화과정을 분석하여 CIS 박막의 형성 과정을 고찰하였다. 특히 Se 증발 온도가 CIS막의 특성과 조성에 미치는 영향을 분석하여, 최적의 셀렌화 조건을 도출하고자 하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2006.11a
• /
• pp.570-572
• /
• 2006

본 연구에서는 Cu와 In 성분을 포함하는 메탄을 용액을 닥터 블레이딩 방법으로 코팅한 후 이를 Se 분위기에서 열처리하여 CIS 광흡순층을 제조하였다 $Cu(NO_3)_2,\;InCl_3$를 출발 물질로 선정하고, 이를 메탄을 용매에 녹여 전구체 용액을 만든 후 여기에 유기물 바인더 물질을 첨가하여 닥터 블레이드 코팅에 적합한 점도를 맞춘 후. 이를 Mo/glass 기판에 코팅하였다. 코팅된 Cu, In 함유 유기물 혼합체를 공기중에서 1차 열처리 후 Se 분위기에서 열처리하면 태양전지용 CIS 광흡수층을 얻게 된다 특히 본 연구에서는 전구체 합성, 유기물 첨가, 공기중 열처리 및 Se 열처리 각 단계에서 광흡수층 막의 형상, 결정구조, 화학조성의 변화과정을 분석하여 CIS 박막의 형성 과정을 고찰하였다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2005.06a
• /
• pp.109-112
• /
• 2005

Cu계$I-III-VI_2$화합물은 직접천이형 반도체로 광흡수계수가 매우 높아 박막형 태양전지 제조에 매우 유리하다 또한 화학적으로 안정하며 Ga, A1등을 첨가하면 에너지 금지대폭을 조절할 수 있어 Wide Bandgap 태양전지 및 탠덤구조 태양전지를 제조하기에도 용이하다. $CuInSe_2(CIS)$ 물질에서 In을 $20-30\%$ 정도 치환한 $Cu(In,\;Ga)Se_2(CIGS)$ 태양전지의 경우 $19.5\%$의 세계 최고 효율을 보고하고 있으며 이는 다결정 실리콘 태양전지의 효율과 비슷한 수준이다. 본 연구에서는 동시 진공증발법을 이용하여 증착한 CIGS 박막 및 $CuGaSe_2(CGS)$ 박막을 이용하여 태양전지를 제조하였다. 공정의 재현성 및 결정립계가 큰 광흡수층 제조를 위하여 실시간 기판 온도 모니터링 시스템을 도입하였으며 버퍼층으로는 용액성장한 CdS 박막을 사용하였다. SLG/MO/CIGS(CGS)/CdS/ZnO/Al구조의 태양전지를 제조하여 면적 $0.5cm^2$에서 각각 $15\%$(CIGS)와 $7\%(CGS)$의 효율을 얻었다.

• Journal of Korean Society of Forest Science
• /
• v.88 no.4
• /
• pp.510-522
• /
• 1999

The air pollutants ; $SO_2$, $SO{_4}^{-2}$, $NO{_3}^-$, $Cl^-$ are absorbed into soils through falling with dusts and rain from the atmosphere. The sources of heavy metal contaminants in the environments are agricultural and horticultural materials, sewage sludges, fossil fuel combustion, metallurgical industries, electronics and waste disposal etc.. The soils and hydrosphere can be polluted on the way of the circulation of these heavy metals. Studied pollutant anions are $SO{_4}^{-2}$, $NO{_3}^-$ and $Cl^-$ and heavy metals are Se, Mo, Zn, Cd, Pb, Mn, Cr, Co, V, As, Cu and Ni which are the elements to be concerned with the essentials for plants, with animal and human health. This study is with the aim of selecting the species of roadside trees and green space trees which have excellent absorption of air pollutants and heavy metals from the atmosphere and the soils in the urban area. Two areas are designated to carry out this study : urban area ; Kwangju city and rural area ; the yard of Forest Environment Institute of Chollanam-do, at Sanje-ri, Sampo-myum, Naju city, Chollanam-do (23km away from Kwangju). This study is carried out to understand the movement of anions and heavy metals from the soils to the trees in both areas, the absorption of anions and heavy metals from atmosphere into leaves and the amounts of anions and heavy metals in leaves and fine roots(< 1mm dia.) of roadside trees and green space trees in Kwangju and trees in the yard of Forest Environment Institute of Chollanam-do. The tree species selected for this study in both areas are Ginkgo biloba, Quercus acutissima, Cedrus deodara, Platanus occidentalis, Robinia pseudoacacia, Alnus japonica. Metasequoia glyptostroboides. Zekova serrata. Prunus serrulata var. spontanea, and Pinus densiflora. The results of the study are as follows : 1. $SO{_4}^{-2}$, $NO{_3}^-$ and $Cl^-$ concentrations are higher in the soils of the urban area than in those of the rural area, and $NO{_3}^-$ and $SO{_4}^{-2}$ are higher in the leaves than in the roots due to the absorption of the these pollutants through the stomata. 2. Ginkgo biloba, Robinia pseudoacacia. Zekova serrata, Quercus acutissima, and Platanus occidentalis can be adequated to the roadside trees and the environmental trees due to their good absorption of $NO{_3}^-$ and $SO{_4}^{-2}$. 3. Heavy metals in the soils of both areas are in the order of Mn > Zn > V > Cr > Pb > Ni > Cu > Mo> Cd, and in the leaves and roots of the trees in the both areas are in the order of Mn>Zn>Cr>Cu>V>Ni. Both orders are similar ones except V. There are more in the urban soils than in the rural soils in amount of Mn, Zn, Pb, V, Cu. 4. It is supposed that there is no antagonism between Mn and Zn in this study. 5. Se, Co and As are not detected in the soils, the leaves and the roots in both areas. Sn, Mo, Cd and Pb are also not detected in the leaves and roots in spite of considerable amount in the soils of both areas.