• Journal of the Korean Society of Safety
• /
• v.21 no.4 s.76
• /
• pp.33-41
• /
• 2006

Material degradation should be considered to assess integrity and residual life of high temperature equipments. However, the property data reflecting degradation are not sufficient for practical use. In this study measuring properties for 1Cr-1Mo-0.25V forging steel generally used for turbine rotor was carried out. Degradation was simulated by isothermal ageing. heat treatment and variation of microstructure was observed. Mechanical properties such as tensile strength, impact energy, hardness and fracture toughness were measured. Assuming a semi-elliptical surface crack at the bore hole in a turbine rotor, material risk was estimated by using the aged material property data obtained in this study. Safety margin was decreased and life of the rotor was exhausted. This procedure can be used in assessing the residual life of a turbine rotor due to material degradation.

• Journal of Powder Materials
• /
• v.28 no.5
• /
• pp.375-380
• /
• 2021

In this study, we investigate the effect of the duration of mechanical alloying on the microstructures and mechanical properties of ODS ferritic/martensitic steel. The Fe(bal.)-10Cr-1Mo pre-alloyed powder and Y₂O₃ powder are mechanically alloyed for the different mechanical alloying duration (0 to 40 h) and then constantly fabricated using a uniaxial hot pressing process. Upon increasing the mechanical alloying time, the average powder diameter and crystallite size increased dramatically. In the initial stages within 5 h of mechanical alloying, inhomogeneous grain morphology is observed along with coarsened carbide and oxide distributions; thus, precipitate phases are temporarily observed between the two powders because of insufficient collision energy to get fragmented. After 40 h of the MA process, however, fine martensitic grains and uniformly distributed oxide particles are observed. This led to a favorable tensile strength and elongation at room temperature and 650℃.

• Journal of Oriental Neuropsychiatry
• /
• v.34 no.1
• /
• pp.23-31
• /
• 2023

Objectives: The purpose of this study was to identify the characteristics of mind-body medicine revealed in the Sa-sang constitutional medicin. Methods: This study examined the psychosomatic aspects of "DongUiSuSeBoWon" that Lee Je-ma wrote about the Sa-sang constitutional medicine, comparing them to Neo-Confucianism and Oriental medicine. Results: Sa-sang constitutions contain much content that can be applied to mind-body medicine. Conclusions: First, the principle of disease caused by mental and physical connections was clearly suggested, as it was considered that when emotions of joy, sorrow, and pleasure reach their peak, they cause fatal damage to the body. Second, it was encouraged to prevent diseases by giving specific examples to prevent the prejudice of the methodology of looking back when it hasn't happened yet and the feeling of anger and joy before the emotions of joy and sorrow are revealed. Third, it suggested the treatment of mental and physical diseases using drugs for diseases that have already occurred and psychiatric methods.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.54 no.2
• /
• pp.198-202
• /
• 2009

The starch properties of two chinese yams were evaluated in this study. Amylose content ranged 13.5% to 19.3%. The swelling power of starches varied 10.98% to 11.43%. Water binding capacity in chinese yam starches ranged 93.46% to 107.21%, high WBC was observed in Ma 1. The onset temperature (To) of two chinese yam starches ranged 62.9 to $75.0^{\circ}C$, peak temperature (Tp) ranged 76.2 to $84.7^{\circ}C$. The PHI(peak height index) was about 4-fold higher in Anwon cultivar than in Ma 1 cultivar. SEM revealed that starches has a presence of large oval or spherical to small irregular-shape granules. Starch granule size ranged 15.23 to 15.52 ${\mu}m$, showing a typical C-type X-ray pattern.

• Economic and Environmental Geology
• /
• v.52 no.5
• /
• pp.323-336
• /
• 2019

The Mesozoic activity on the Korean Peninsula is mainly represented by the Triassic post-collisional, Jurassic orogenic, and Cretaceous post-orogenic igneous activities. The diversity of mineralization by each geological period came from various geothermal systems derived from the geochemical characteristics of magma with different emplacement depth. The Cretaceous metallic mineralization has been carried out over a wide range of time periods from ca. 115 to 45 Ma (main stage; ca. 100 to 60 Ma) related to post-orogenic igneous activity, and spatial distribution patterns of most metal deposits are concentrated along small granitic stocks. The late Cretaceous metal deposits in the Gyeonggi and Yeongnam massifs are generally distributed along the boundary among the Gongju-Eumseong fault system and the Yeongdong-Gwangju fault system and the Gyeongsang Basin, most of them are in the form of a distal epithermal~mesothermal Au-Ag vein or a transitional mesothermal Zn-Pb-Cu vein. On the other hand, diverse metal commodities in the Taebaeg Basin, the Okcheon metamorphic belt and the Gyeongsang Basin are produced from various deposit types such as skarn, carbonate-replacement, vein, porphyry, breccia pipe, and Carlin type. In the late Cretaceous metallic mineralization, various mineral deposits and commodities were induced not only by the pathway of the hydrothermal solution, but also by the diversity of precipitation environment in the proximity difference of the granitic rocks. The diversity of these types of Cretaceous deposits is fundamentally dependent on the geochemical characteristics such as degree of differentiation and oxidation state of related igneous rocks, and ore-forming fluids generally exhibit the evolutionary characteristics of intermediate- to low-sulfur hydrothermal fluids.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.05b
• /
• pp.521-526
• /
• 1998

군분리공정의 관심대상 핵종인 잔존 U, MA인 Am, Np 및 백금족원소의 장수명핵종인 Tc을 방사성모의용액으로부터 효과적으로 분리할 수 있었다. 각 단위공정에 주입되는 용액의 농도를 기준으로 하여 볼 때 잔존 U 제거 공정에서 U, Np, 및 Tc의 회수율은 각각 99.1%. 31.9%, 및 99.5%였다. 개미산 탈질 공정에서는 탈질 용액의 총 산도를 0.4M 이하까지 감소시켰으며, 부수적으로 후속용매추출 공정 전반에 걸쳐 문제 핵종으로 작용하는 Zr, Mo, Fe 등을 각각 99.8%, 94.2%, 22.4% 침전 제거시킬 수 있었다. 마지막으로 DEHPA에 의한 AM/RE 상호분리 공정에서는 연속적인 선택적역추출에 의해 Am 및 Np 의 회수율은 각각 99.8% 및 98.2％ 정도였고, Am의 경우 7.6%읜 Fe및 81.6% 의 Mo가, Np의 경우 5.8%의 Fe이 불순물로서 여전히 존재하고 있다. 한편 RE 생성물에서는 97～99.9%의 RE가 회수 제거되었다.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1002-1004
• /
• 2001

In conventional zero-current-switching(ZCS) PWM converters, the switching loss, stress and noise can't be minimized because they adopt auxiliary switches operated in hard-switching. In this paper, new ZCS-PWM converters of which auxiliary switches always operate with soft-switching are proposed. Therefore, the proposed ZCS-PWM converters are most suitable for systems requiring high-power density. The characteristics of these converters are verified by experimental results.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.1193-1195
• /
• 2000

In conventional zero-current-switching(ZCS) PWM converters, the switching loss, stress and noise can't be minimized because they adopt auxiliary switches operated in hard-switching. In this paper, new ZCS-PWM converters of which auxiliary switches always operate with soft-switching are proposed. Therefore, the proposed ZCS-PWM converters are most suitable for systems requiring high-power density. The characteristics of these converters are verified by results of simulation.

• Journal of the Mineralogical Society of Korea
• /
• v.26 no.3
• /
• pp.161-174
• /
• 2013

The geology of the weondong deposit area consists mainly of Cambro-Ordovician and Carboniferous-Triassic formations, and intruded quartz porphyry and dyke. The skarn mineralized zone in the weondong deposit is the most prospective region for the useful W-mineral deposits. To determine the skarn-mineralization age, U-Pb SHRIMP and K-Ar age dating methods were employed. The U-Pb zircon ages of quartz porphyry intrusion (WD-A) and feldspar porphyry dyke (WD-B) are 79.37 Ma and 50.64 Ma. The K-Ar ages of coarse-grained crystalline phlogopite (WD-1), massive phlogopite (WDR-1), phlogopite coexisted with skarn minerals (WD-M), and vein type illite (WD-2) were determined as $49.1{\pm}1.1$ Ma, $49.2{\pm}1.2$ Ma, $49.9{\pm}3.6$ Ma, and $48.3{\pm}1.1$ Ma, respectively. And the ages of the high uranium zircon of hydrothermally altered quartz porphyry (WD-C) range from 59.7 to 38.7 Ma, which dependson zircon's textures affected by hydrothermal fluids. It is regarded as the effect of some hydrothermal events, which may precipitate and overgrow the high-U zircons, and happen the zircon's metamictization and dissolution-reprecipitation reactions. Based on the K-Ar age datings for the skarn minerals and field evidences, we suggest that the timing of W-skarn mineralization in weondong deposit may be about 50 Ma. However, for the accurate timing of skarn mineralization in this area, the additional researches about the sequence of superposition at the skarn minerals and geological relationship between skarn deposits and dyke should be needed in the future.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.3
• /
• pp.105-109
• /
• 2022

For the realization of higher reliable transition metal dichalcogenide layer, molybdenum disulfide was formed on sapphire substrate by direct current sputtering and subsequent rapid thermal annealing process. Unlike RF sputtered MoS₂ thin films, DC sputtered showed no irregular holes and protrusions after annealing process from scanning electron microscope images. From atomic force microscope results, it was possible to investigate that surface roughness of MoS₂ thin films were more dependent on DC sputtering power then annealing temperature. On the other hand, the Raman scattering spectra showed the dependency of significant E¹_2g and A¹_g peaks on annealing temperatures.