• 대한금속재료학회지
• /
• 제46권7호
• /
• pp.458-463
• /
• 2008

High purity Fe thin films were prepared by the ion beam deposition method with $^{56}Fe^{+}$ions on the Si substrate at the room temperature. The Fe thin films were deposited at the ion energy of 50 eV and 100 eV. Microstructural properties were investigated on the atomic scale using high-resolution transmission electron microscopy (HRTEM). It was found that the Fe thin film obtained with the energy of 50 eV having an excellent corrosion resistance consists of the amorphous layer of ~15 nm in thickness and the bcc crystalline layer of about 30 nm in grain size, while the thin film obtained with the energy of 100 eV having a poor corrosion resistance consists of little amorphous layer and the defective crystalline layer. Furthermore the crystal structures and arrangements of the oxide layers formed on the Fe thin films were analyzed by processing of the HRTEM images. It was concluded that the corrosion behavior of Fe thin films relates to the surface morphology and the crystalline structure as well as the degree of purification.

• Journal of Forest and Environmental Science
• /
• 제37권3호
• /
• pp.226-234
• /
• 2021

Two species, P. pyrifolia and P. ussuriensis, of the genus Pyrus native to Korea, are valuable genetic resources that can be used for food, dietary supplement, pharmaceutical, and cosmetics. Bioactive compounds of the plant leaves are the main components that are used for the products. Farmers had cultivated a few individuals from the wild to produce fruits or leaves for traditional remedy or tea; however, bioactive components of their leaves are not tested. We selected some trees from the natural stand that have distinct traits for the improvement program. We investigated the bioassay on the extracts' bioactive compounds and antioxidant capacity from the selected accessions and other accessions, including newly developed cultivars. The contents of the phenolic compounds and flavonoids from the leaf extracts of the selected accessions were higher than the commonly cultivated trees in both species but lower than 'Sanhyang' in P. ussuriensis. The antioxidant capacity was measured using two assay methods, DPPH and ABST. The selected cultivars also had higher inhibitory activity than common trees. The selected accession 'Cultivar 3' in P. pyrifolia had the highest radical scavenging activity than others. Although leaves of the accessions were used only in this study, all three selected individuals have the potential for cultivar in containing high bioactive compounds and antioxidant capacity.

• 한국육종학회지
• /
• 제41권4호
• /
• pp.510-514
• /
• 2009

난 시장이 확대되고 있지만 일반대중이 선호하고 있는 동양계 심비디움 난은 대부분 수입 또는 산채에 의존하여 고가로 판매되고 있고, 서양계 심비디움은 외국 품종에 대한 로열티 지불 등의 문제가 대두되고 있다. 본 연구에서는 관상가치가 있고 대량증식이 가능하여 외국산 품종을 대체할 수 있는 소형 심비디움 난을 육성하고자 하였다. 동양계 및 서양계 심 비디움의 교배종인 "동양"의 바이러스 무병주를 생장점배양에 의해 기내에서 대량증식을 하던 중, 잎무늬 돌연변이 식물체를 선발하여 고정계통을 "대국"이라 명명하였다. "대국"은 잎의 가장자리에 백색이나 노란색 줄무늬가 있는 복륜 무늬종으로 광택이 있다. "대국"의 잎 길이는 약 40 cm, 엽폭은 1.6 cm, 엽수는 4~5장으로 동양에 비교하여 잎 및 초세가 작고 단아하다. 꽃에도 복륜무늬가 있으며 개화시기는 3~5월과 9~10월 연 2회이다. 신품종 "대국"은 잎무늬 줄무늬와 초세가 단정하여 분화용 엽예품으로 관상가치가 뛰어나며, 기존 동양계 심비디움 품종에 비교하여 조직배양 및 순화가 잘되고 생육이 왕성하여 값싸게 공급 가능한 품종이다.(품종특허 등록번호: 특허 제 0478734).

• Nuclear Engineering and Technology
• /
• 제51권4호
• /
• pp.1109-1116
• /
• 2019

It is essential to predict the radioactivity distribution around the reactor cooling system (RCS) during obligatory cyclic operation of AP-1000. A home-developed program CPA-AP1000 is upgraded to predict the response of activated corrosion products (ACPs) in the RCS. The program is written in MATLAB and it uses state of the art MCNP as a subroutine for flux calculations. A pair of cyclic power profiles were superimposed after initial full power operation. The effect of cyclic operation is noticed to be more prominent for in-core surfaces, followed by the primary coolant and out-of-core structures. The results have shown that specific activity trends of $^{56}Mn$ and $^{24}Na$ promptly follow the power variations, whereas, $^{59}Fe$, $^{58}Co$, $^{99}Mo$ and $^{60}Co$ exhibit a sluggish power-following response. The investigations pointed out that promptly power-following response of ACPs in the coolant is vital as an instant radioactivity source during leakage incidents. However, the ACPs with delayed power-following response in the out-of-core components are perceived to cause a long-term activity. The present results are found in good agreement with those for a reference PWR. The results are useful for source term monitoring and optimization of work procedures for an innovative reactor design.

• 한국광학회지
• /
• 제30권2호
• /
• pp.59-66
• /
• 2019

$2^{\circ}$ 기울어진 산화막 코팅 실리콘 기판의 바이오칩과 프리즘으로 제작한 바이오센서와 검광자 회전 타원편광계를 이용하여 심근경색 생체표지자인 미오글로빈과 cTnI의 진단 농도를 수백 초 내에 실시간 초고감도로 측정하는데 성공하였다. 러닝 버퍼로는 순수한 phosphate buffered saline (PBS) 또는 PBS에 10% 인간 혈청을 섞은 러닝 버퍼를 사용하였다. PBS 조건에서는 미오글로빈과 cTnI가 각각 1 ng/mL와 5 pg/mL로 측정되었으며, PBS에 인간 혈청을 10% 섞은 조건에서는 미오글로빈과 cTnI는 각각 1 ng/mL과 1 pg/mL로 측정되었다. 이러한 심근경색 생체표지자의 진단 농도는 현재 제시된 세계보건기구의 심근경색 진단 기준 농도보다 미오글로빈은 1/15배 낮고, cTnI는 1/80배 낮다.

• Bulletin of the Korean Chemical Society
• /
• 제10권2호
• /
• pp.191-196
• /
• 1989

We obtained the new complexes, $Fe{\eta}^4-R,R'-TPSCp](CO)_3$(R,R'-TPSCp = 1,1-disubstituted 2,3,4,5-Tetraphenyl-1-Silacyclopenta-2,4-diene; R = Ph, R' = Cl, R = R' = Cl) from the reaction of the corresponding R,R'-TPSCp with ironpentacarbonyl under reflux in toluene. Also, the analogous complexes with R = R' = Me and R = Me, R' = Cl were obtained in an identical manner. We have determined the crystal structure of $Fe[Ph(Cl)-TPSCp](CO_)3$ by using Mo ka, ${\lambda}$ = 0.71069${\AA}$, where the unit cell was found to be monoclinic with a = 9.042 (6)${\AA}$, b = 19.870 (9)${\AA}$, c = 17.426 (9)${\AA}$ and ${\beta}$ = 96.28(4)$^{\circ}$. The butadiene moiety of TPSCp ring is planar and the dihedral angle of the butadiene plane and C4-Si-C25 plane was opened up to 41.8$^{\circ}$. The C-C distances in the butadiene moiety were found to be 1.4346, 1.462, and 1.440 ${\AA}$, respectively. It may be said that the four ${\pi}$-electrons are delocalized over the four carbons in five membered ring through coordination with ironcarbonyl. In this complex Fe is either in distorted tetrahedron environment with the centroid of the four C-atom butadiene moiety and three carbons of the three carbonyls or in distorted square-pyramidal environment with two midpoints of double bonds of the butadiene moiety and two carbons of carbonyl defining the base of the pyramid and the carbon of remaining carbonyl the apex.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.17-17
• /
• 2023

국내의 부지특성 및 감시 관련 규정은 원자력 안전위원회 고시 제2021-16호 제4조(세부지침)와 원자력 안전위원회 고시 제2021-17호 제16조에 의거하고, 국외는 국제원자력기구(IAEA: International Atomic Energy Agency)에서 안전기준을 제시하고 있다(IAEA, 2011). 따라서 국내 중·저준위 방사성폐기물 처분시설은 2006년부터 광역 지질을 포함한 부지 지질/지형, 기상, 수문, 수리지질, 인문사회 등을 망라한 조사를 시행하여 부지 현황에 대한 분석 및 안정성 평가를 수행한다. 부지감시의 수문·지구화학 분야에서는 현장 수질 측정 6항목과 실내 분석 26항목을 감시하고 있으나, 본 연구는 이 중 9개 항목(EC, Na, K, Ca, Mg, SiO₂, Cl, SO₄, HCO₃)을 선정하여 분석하였다. 연구 목적은 물시료 분석자료의 주성분-다중선형회귀-군집 분석과 Piper Diagram 분석결과로부터 해수와 담수(지하수)와의 특성분석 및 해수 영향을 분석하는 것이다. 현장 부지내 지하수 7개 관정(GM-1, 2, 4, 5, 6, 7, 8)과 해수 2개 지점(Sea-1, 2)을 대상으로 통계학적 주성분 분석결과, 대부분의 지하수는2개~4개의 요인으로 구분되고, 해수와의 유사성을 해석하기 위해 확인한 관정은 GM-5, GM-6, GM-1 지점으로 분류되었다. 상기와 같이 해수의 영향을 확인하기 위해 해수 2개 지점과 동일한 군집으로 분류되는 지하수는 GM-5 관정으로 확인되었고, 해안선에서 가까운 GM-5 관정과 같이 유사한 거리에 분포한 지하수 GM-1, 2, 4 관정은 2개 혹은 3개의 최적 군집으로 분류하였을 때도 GM-5와는 다른 특성을 보여주었다. 이는 해안과 인접하더라도 수질은 다른 지질학적 특성(지형, 기상, 단열대 등)에 따라 영향받았음을 지시한다.

• 한국전기전자재료학회논문지
• /
• 제36권3호
• /
• pp.298-302
• /
• 2023

In this paper, we discussed the effect of field plate dielectric materials such as silicon dioxide (SiO₂), aluminum oxide (Al₂O₃), and hafnium oxide (HfO₂) on the breakdown characteristics of β-Ga₂O₃ Schottky barrier diodes (SBDs). The breakdown voltage (BV) of the SBDs with a field plate was higher than that of SBDs without a field plate. The higher dielectric constant of HfO₂ contributed to the superior reduction in electric field concentration at the Schottky junction edge from 5.4 to 2.4 MV/cm. The SBDs with HfO₂ field plate showed the highest BV of 720 V, and constant specific on-resistance (R_on,sp) of 5.6 mΩ·cm², resulting in the highest Baliga's figure-of-merit (BFOM) of 92.0 MW/cm². We also investigated the effect of dielectric thickness and field plate length on BV.

• 한국지진공학회논문집
• /
• 제28권1호
• /
• pp.47-57
• /
• 2024

Recently, in newly constructed apartment buildings, the exterior wall structures have been characterized by thinness, having various openings, and a significantly low reinforcement ratio. In this study, a nonlinear finite element analysis was performed to investigate the crack damage characteristics of the exterior wall structure. The limited analysis models for a 10-story exterior wall were constructed based on the prototype apartment building, and nonlinear static analysis (push-over analysis) was performed. Based on the finite element (FE) analysis model, the parametric study was conducted to investigate the effects of various design parameters on the strength and crack width of the exterior walls. As the parameters, the vertical reinforcement ratio and horizontal reinforcement ratio of the wall, as well as the uniformly distributed longitudinal reinforcement ratio and shear reinforcement ratio of the connection beam, were addressed. The analysis results showed that the strength and deformation capacity of the prototype exterior walls were limited by the failure of the connection beam prior to the flexural yielding of the walls. Thus, the increase of wall reinforcement limitedly affected the failure modes, peak strengths, and crack damages. On the other hand, when the reinforcement ratio of the connection beams was increased, the peak strength was increased due to the increase in the load-carrying capacity of the connection beams. Further, the crack damage index decreased as the reinforcement ratio of the connection beam increased. In particular, it was more effective to increase the uniformly distributed longitudinal reinforcement ratio in the connection beams to decrease the crack damage of the coupling beams, regardless of the type of the prototype exterior walls.

• 한국산업보건학회지
• /
• 제9권1호
• /
• pp.56-72
• /
• 1999

Airborne concentrations of welding fumes in which 13 different metals such as Al, Cd, Cr, Cu, Fe, Mn, Mo, Ni, Pb, Si, Sn, Ti, and Zn were analyzed were measured at 18 factories including automobile assembly and manufactures, steel heavy industries and shipyards. Air samples were collected by personal sampler at each worker's worksite(n=339). Blood levels of Cd, Cu, Fe, Mn, Pb and Zn were also measured from samples taken from 447 welders by atomic absorption spectrometry and compared with control values obtained from 127 non-exposed workers. The results were as follows ; 1. Among various welding types, $CO_2$ welding 70.2 % were widely used, shielded metal arc welding(SMAW) 22.1 % came next, and rest of them were metal inert gas(MIG) welding, submerged arc welding(SAW), spot welding(SPOT) and tungsten inert gas(TIG) welding. 2. Welding fume concentration was $0.92mg/m^3$($0.02{\sim}15.33mg/m^3$) at automobile assembly and manufactures, $4.10mg/m^3$($0.02{\sim}70.75mg/m^3$) at steel heavy industries and $5.59mg/m^3$($0.30{\sim}91.16mg/m^3$) at shipyards, respectively, showing significant difference among industry types. Workers exposed to high concentration of welding fumes above Korean Permissible Exposure Limit(KPEL) amounted to 7.9 % and 12.5 %, in $CO_2$ welding and in SMAW at automobile assembly and manufactures and 62.7 % in $CO_2$ welding, and 12.5 % in SMAW at shipyards, and 66.2 % in $CO_2$ welding and 70.6 % in SMAW at steel heavy industries. 3. Geometric mean of airborne concentration of each metal released from welding fumes was below one 10th of KPEL in all welding types. Percentage of workers, however, exposed to airborne concentration of metals above KPEL amounted to 16.8 % in Mn and 7.6 % in Fe in $CO_2$ welding; 37.5 % in Cu in SAW, 30 % in Cu in TIG; and 25 % in Pb in SPOT welding. As a whole, 76 Workers(22.4%) were exposed to high concentration of any of the metals above KPEL. 4. There were differences in airborne concentration of metals such as Al, Cd, Cr, Cu. Fe. Mn, Mo, Ni, Pb, Si, Sn, Ti and Zn by industry types. These concentrations were higher in shipyards and steel heavy industries than in automobile assembly and manufactures. Workers exposed to higher concentration of Pb above KPEI amounted to 7.4 % of workers(7/94) in automobile assembly and manufactures. In shipyards, 19.2 % of workers(19/99) were over-exposed to Mn and 7.1 % (7/99) to Fe above KPEL. In steel heavy industries, 14.4 %(21/146), 7.5 %(11/146) and 13 %(19/146) were over-exposed to Mn, Fe and Cu, respectively. As a whole, 76 out of 339 workers(22.4%) were exposed to any of the metals above KPEL. 5. Blood levels of Cd, Cu, Fe, Mn, Pb, and Zn in welders were $0.11{\mu}g/100m{\ell}$, $0.84{\mu}g/m{\ell}$, $424.4{\mu}g/m{\ell}$, $1.26{\mu}g/100m{\ell}$, $5.01{\mu}g/100m{\ell}$ and $5.68{\mu}g/m{\ell}$, respectively, in contrast to $0.09{\mu}g/100m{\ell}$, $0.70{\mu}g/m{\ell}$, $477.2{\mu}g/m{\ell}$, $0.73{\mu}g/100m{\ell}$, $3.14{\mu}g/100m{\ell}$ and $6.15{\mu}g/m{\ell}$ in non-exposed control groups, showing significantly higher values in welders but Fe and Zn.