• 제목/요약/키워드: Mn-doping

검색결과 169건 처리시간 0.019초

$BaTiO_3$ 세라믹의 유전손실에 미치는 Mn 첨가의 영향 (Effect of Mn Addition on the Dielectric Loss characteristics of $BaTiO_3$ Ceramics)

  • 김태중;한주환;이재열;이희영
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2000년도 하계학술대회 논문집
    • /
    • pp.436-439
    • /
    • 2000
  • Change of dielectric loss of use in high relative permitivity capacitor BaTiO$_3$ ceramic depends on Mn doping have been investigated. The powders used in this study were commercial BaTiO$_3$, TiO$_2$and, MnCO$_3$. Sample was fabricated by conventional ceramic process. The quantity of Mn was changed gradually from 0.lmol% to 10mo1%. The sintering densities were reduced with increasing amount of MnCO$_3$. This result is because of increase of low density second phase BaMnO$_3$. When the samples were doped by over 0.2mol% of MnCO$_3$, average grain sizes were enlarge to several tens ${\mu}{\textrm}{m}$. The dielectric losses were reduced by Mn doping to lmol% but, increased from lmol% to 10mo1% gradually.

  • PDF

Investigation of Photoelectrochemical Water Splitting for Mn-Doped In2O3 Film

  • Sun, Xianke;Fu, Xinhe;You, Tingting;Zhang, Qiannan;Xu, Liuyang;Zhou, Xiaodong;Yuan, Honglei;Liu, Kuili
    • Electronic Materials Letters
    • /
    • 제14권6호
    • /
    • pp.733-738
    • /
    • 2018
  • Undoped and Mn-doped $In_2O_3$ films were prepared by radiofrequency magnetron sputtering technique. The effects of Mn doping on the structural and optical properties of as-prepared films were investigated using X-ray diffraction, X-ray photoelectron spectroscopy and ultraviolet-visible spectroscopy. Mn doping can enhance the intensity of (222) peak in Mn-doped $In_2O_3$ thin film, indicating Mn dopant promotes preferred orientation of crystal growth along (222) plane. XPS analyses revealed that the doped Mn ions exist at + 2 oxidation states, substituting for the $In^{3+}$ sites in the $In_2O_3$ lattice. UV-Vis measurements show that the optical band gap $E_g$ decreases from 3.33 to 2.87 eV with Mn doping in $In_2O_3$, implying an increasing sp-d exchange interaction in the film. Our work demonstrates a practical means to manipulate the band gap energy of $In_2O_3$ thin film via Mn impurity doping, and significantly improves the photoelectrochemical activity.

Mn 도핑한 $ZnGa_2O_4$ 형광체의 제조 및 빛발광 특성 (Preparation and Photoluminescence of Mn-Doped $ZnGa_2O_4$ Phosphors)

  • 류호진;박희동
    • 한국세라믹학회지
    • /
    • 제33권5호
    • /
    • pp.531-535
    • /
    • 1996
  • ZnGa2O4 and Mn-doped ZnGa2O4 were synthesized using the state reaction method to investigate their photoluminescence characteristics depending on Mn concentration. Under 254nm excitation, ZnGa2O4 exhibited a broad-band emission extending from 330 nm to 610 nm peaking at 450nm. On the other hand Mn-doped ZnGa2O4 showed a new strong narrow-band emission peaking at 504 nm and maximum intensity at the doping concentration of 0.006 mole Mn.

  • PDF

Effects of Mn Doping on Structural and Magnetic Properties of Multiferroic BiFeO3 Nanograins Made by Sol-gel Method

  • Raghavender, A.T.;Hong, Nguyen Hoa
    • Journal of Magnetics
    • /
    • 제16권1호
    • /
    • pp.19-22
    • /
    • 2011
  • [ $BiFeO_3$ ]is a multiferroic material that attracts attentions of many research groups due to its potential as being ferroelectric and ferromagnetic above room temperature. We have prepared both undoped- and Mn-doped $BiFeO_3$ by sol-gel auto-ignition method. Doping of Mn has resulted in decreasing grain size from 60 to 32 nm. X-ray diffraction data show that the samples are pure and single-phase. Infrared measurements on $BiFeO_3$ and Mn-doped $BiFeO_3$ revealed intrinsic stretching vibrations of tetrahedral sites of $Fe^{3+}$-O and of octahedral $Bi^{3+}$-O as well. On the other hand, as the Mn concentration increases, the magnetic moment of $BiFeO_3$ increases. It gives some suggestions in manipulating structural and magnetic properties of $BiFeO_3$ by doping Mn.

Synthesis and Characterization of Mn3O4-Graphene Nanocomposite thin Film by an ex situ Approach

  • Kang, Myunggoo;Kim, Jung Hun;Yang, Woochul;Jung, Hyun
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권4호
    • /
    • pp.1067-1072
    • /
    • 2014
  • In this study, we report a new approach for $Mn_3O_4$-graphene nanocomposite by ex situ method. This nanocomposite shows two-dimensional aggregation of nanoparticle, and doping effect by decorated manganese oxide ($Mn_3O_4$), as well. The graphene film was made through micromechanical cleavage of graphite on the $SiO_2/Si$ wafer. Manganese oxide ($Mn_3O_4$) nanoparticle with uniform cubic shape and size (about $5.47{\pm}0.61$ nm sized) was synthesized through the thermal decomposition of manganese(II) acetate, in the presence of oleic acid and oleylamine. The nanocomposite was obtained by self-assembly of nanoparticles on graphene film, using hydrophobic interaction. After heat treatment, the decorated nanoparticles have island structure, with one-layer thickness by two-dimensional aggregations of particles, to minimize the surface potential of each particle. The doping effect of $Mn_3O_4$ nanoparticle was investigated with Raman spectra. Given the upshift in positions of G and 2D in raman peaks, we suggest that $Mn_3O_4$ nanoparticles induce p-doping of graphene film.

Li[Ni0.2Li0.2Mn0.6]O2 양극물질의 Ag 도핑(Doping) 효과 (Ag Doping Effect on Li[Ni0.2Li0.2Mn0.6]O2 Cathode Material)

  • 유제혁;김석범;박용준
    • 한국전기전자재료학회논문지
    • /
    • 제21권3호
    • /
    • pp.249-254
    • /
    • 2008
  • Ag doping effect on $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ cathode material was studied. Specially, we focused on rate performance of Ag doped samples. The $Li[Ni_{0.2}Li_{0.2}Mn_{0.6}]O_2$ powder was prepared by simple combustion method and the Ag was doped using $AgNO_3$ during gelation process. Based on X-ray diffraction analysis, there was no structural change by Ag doping, but the 'metallic' form of Ag was included in the doped powder. Both bare and Ag 1 wt.% doped sample showed similar discharge capacity of 242 mAh/g at 0.2C rate. However, as the increase of charge-discharge rate to 3C, Ag 1 wt.% doped sample showed higher discharge capacity (172 mAh/g) and better cyclic performance than those of bare sample. The discharge capacity of Ag 5 wt.% doped sample was relatively low at all rate condition. However it displayed better rate performance than other samples.

Mn 도핑이 Fe2O3 쿨 안료의 흑색도 및 NIR 반사율에 미치는 영향 (Mn-doping Effect on the Blackness and NIR Reflectance of Fe2O3 Cool Pigments)

  • 황진수;정경열
    • 한국분말재료학회지
    • /
    • 제28권1호
    • /
    • pp.38-43
    • /
    • 2021
  • A high NIR-reflective black pigment is developed by Mn doping of Fe2O3. The pigment powders are prepared by spray pyrolysis, and the effect of the Mn concentration on the blackness and optical properties is investigated. Mn doping into the crystal lattice of α-Fe2O3 is found to effectively change the powder color from red to black, lowering the NIR reflectance compared to that of pure Fe2O3. The pigment doped with 10% Mn, i.e., Fe1.8Mn0.2O3, exhibits a black color with an optical bandgap of 1.3 eV and a Chroma value of 1.14. The NIR reflectance of the prepared Fe1.8Mn0.2O3 black pigment is 2.2 times higher than that of commercially available carbon black, and this material is proven to effectively work as a cool pigment in a temperature rise experiment under near-infrared illumination.

Hot Wall 법의 반복 증착에 의해 제작한 ZnS:Mn 박막 엘렉트로루미네센스의 특성 (Characteristics of Zns:Mn Thin Film Electroluminescences Prepared by a Repeated Deposition of Hot Wall Method)

  • 이상태
    • 한국항해학회지
    • /
    • 제25권4호
    • /
    • pp.435-442
    • /
    • 2001
  • A new technique to grow a manganese-doped zinc-sulfide(ZnS:Mn) has been proposed using the repeated deposition of the Hot Wall method. The optical characteristics and crystallinity for the ZnS and ZnS:Mn thin films deposited on a quartz glass substrate by the method were investigated. Also, The ZnS:Mn thin film elcetroluminescent devices were fabricated by the method to study luminescence characteristics. All films showed (111)-oriented cubic structure. By the repeated deposition, the deposition rates were decreased, and the optical characteristics and crystalline properties were improved, which clarifies that the method is effective to deposit the thin films with good crystallinity Futhermore, the crystallinity was more improved by the doping of Mn. Only one peak emission at around 585nm originating from Mn luminescent center is observed In the photoluminescent and electroluminescent spectra of ZnS:Mn films and the luminance of the ZnS:Mn-based thin film electroluminescent devices was obtained below 60cd/$m^2$ . The optical and crystalline properties, luminescence characteristics are discussed in terms of the effects of the repeated deposition and Mn-doping.

  • PDF

Effect of chemical doping on heterostructured Fe-based superconductor Sr2VO3FeAs

  • Ok, Jong Mok;Na, Se Woong;Kim, Jun Sung
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제20권1호
    • /
    • pp.28-31
    • /
    • 2018
  • Phase diagrams of electron- and hole-doped $Sr_2VO_3FeAs$ are investigated using Co and Mn substitution at Fe site. Metallic nature survives only for Co (electron) doping, not for Mn (hole) doping. The conductivity of $Sr_2VO_3(Fe,M)As$ (M=Mn,Co) is sensitive to the structural modification of FeAs microstructure rather than carrier doping. This finding implies that the FeAs layer plays a dominant role on the charge conduction, thus the $SrVO_3$ layers should be considered as an insulating block. Also, we found that the superconductivity is rapidly suppressed by both dopants. This result is different from the conventional behavior that superconductivity is induced by doping in the most of Fe pnictides. Our finding strongly supports the uniqueness of $Sr_2VO_3FeAs$ among the Fe pnictide superconductors.

고주파 유전체 $(Pb_{0.62}Ca_{0.38})ZrO_{3}$의 Mn 첨가에 따른 유전특성 변화 (Effect of Mn doping on the dielectric properties of $(Pb_{0.62}Ca_{0.38})ZrO_{3}$ at microwave frequency)

  • 권부연;김우경;여철현;최승철
    • 한국재료학회지
    • /
    • 제5권1호
    • /
    • pp.36-41
    • /
    • 1995
  • $(Pb_{0.62}Ca_{0.38})ZrO_{3}$계에서의 조성 x=0.38의 $(Pb_{0.62}Ca_{0.38})ZrO_{3}$에 Mn 성분을 첨가하여 $1300^{\circ}C$에서 2시간 소결한 세라믹스의 소결성 및 고주파 유전특성을 연구하였다. Mn의 첨가로 소결온도가 낮아지며 치밀한 소결체를 얻을 수 있었다. 하소온도가 높아짐에 따라 하소과정에서 합성반응이 충분히 이루어져 소결체의 최종 소결과정에 영향을 미처 유전체의 유전상수와 품질계수 Q값이 증가하였다. Mn의 첨가량에 따른 물성변화는 Mn의 첨가량이 0.15wt%까지의 첨가범위에서는 $Mn^{4+}$$Mn^{3+}$ 또는 $Mn^{2+}$로 환원됨에 따라 산소공공이 생성되며, 억셉터로 작용하여 품질계수 Q값이 1300정도까지 증가하였고, 유전율은 90-100 정도로 변화가 없었다. 그러나 Mn 첨가량이 0.5 wt%이상일때 유전손실이 매우 증가되며 동시에 품질계수 Q값이 점차 감소하였다.

  • PDF