• Journal of the Korean Ceramic Society
• /
• v.35 no.10
• /
• pp.1055-1060
• /
• 1998

The effects of particle size distribution have been investigated on the high frequency low loss Mn-Zn fer-rites. The particle size distribution was controlled by milling time. Zirconia ball and engineering plastic jar were employed to avoid iron contamination from the milling media. As increasing the milling time BET value was increased from 0.55 to 3.21m2/g and mean particle size was decreased from 2.1 $\mu\textrm{m}$ to 1.0$\mu\textrm{m}$ The large specific surface area of initial powder resulted in the high density of sintered core. However starting powders with high BET lead to inhomogeneous grain growth as well as poor electromagnetic pro-perties at sintering temperature above 1300$^{\circ}C$.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.158-158
• /
• 2005

• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.149-153
• /
• 1999

Frequency and temperature dependence of magnetic loss has been investigated in Mn-Zn ferrites containing the sesistive temary compounds of $SiO_2-CaO-V_2O_5$. The Mn-Zn ferrite with the composition of $MnO:ZnO:Fe_2O_3=36:11:53$(by mol %) are prepared by self-propagating high-temperature synthesis. From the results of frequency dependence of core loss, it has been found that the hysteresis loss is dominant at low frequency and the eddy current loss becomes more dominant as the frequency increases. With the addition of resistive compound, the frequency dependence of core loss, it has been found that the hysteresis loss is dominant at low frequency and the eddy current loss becomes more dominant as the frequency increases. With the addition of resistive compound, the frequency region where the hysteresis loss is dominant becomes wide. The core-loss minimum occurs at about 4$0^{\circ}C$ in the specimens with the additive because of the reduction in eddy current loss.

• Proceedings of the KIEE Conference
• /
• 2001.07e
• /
• pp.86-89
• /
• 2001

In this paper, the composite damping sheet with electromagnetic wave absorption was developed and studied. The damping sheets with Ni-Zn ferrite, Mn-Zn ferrite and PZT were prepared by mixing, molding and drying. From the characterizing results, the optimal portion of the composite is 1:1:0.1 of Mn-Zn ferrite:Rubber:PZT. The maximum absorption was -30 dB at 860 MHz in the single structure and over -15 dB at 180 MHz and 860 MHz in the two or three layers.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.29-34
• /
• 2004

Generally, a silicone rubber and a chloride polyethylene(CPE) have been used for the development of high-performance composite EM(ElectroMagnetic) wave absorbers. In this study, the EM wave absorption abilities for natural lacquer which is newly suggested in this study as a binder for composite EM wave absorbers were investigated to develop an improved EM wave absorbers. In addition, MnZn ferrite composite EM wave absorbers mixed with the natural lacquer were prepared and their absorption ability was also investigated. MnZn ferrite composite EM wave absorbers which employs the natural lacquer as a binder showed an improved EM wave absorption characteristics in comparison with the conventional binder such as a silicone rubber and a chloride polyethylene(CPE). The matching frequency and the absorption ability of EM wave absorbers mixed with natural lacquer can be controled the change of the thickness of them.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.11a
• /
• pp.516-519
• /
• 1999

스위칭 전원에 사용되는 Mn-Zn 페라이트에 대항하는 고성능화의 요구에 부응하기 위해 그 중요한 요인이 되는 기수가 다른 Mn 산화물에 착목하여 그것들을 이용 제작한 Mn-Zn 페라이트의 자기특성 및 결정구조를 정밀하게 조사함과 동시에 그것들의 상관성을 검토하였다. Mn-Zn 페라이트의 소성 분위기의 변경방식은 소성개시에서 종료시까지 질소 분위기, 냉각시부터 질소분위기로 변경, 소성 개시에서 종료시까지 대기중 소성 세가지를 실험하였고, 소성 온도는 115$0^{\circ}C$, 120$0^{\circ}C$, 125$0^{\circ}C$ 130$0^{\circ}C$ 135$0^{\circ}C$ 및 140$0^{\circ}C$의 6종류의 시료를 제작하였다. 이 결과는 Mn-Zn 페라이트의 소성 분위기 및 온도 최적화는 승온 및 온도 유지 단계에서는 대기중으로, 냉각단계에서는 질소가스 분위기로 치환한 것과 소성 온도는 120$0^{\circ}C$ 이다. 이 분위기에서 Mn-Zn 페라이트를 가수를 다르게 하여 시료의 투자율 및 주파수 특성, 코아로스 주파수 의존성, 코아로스 주파수로 나눈값의 주파수 의존성, 스피넬 구조(311)의 면에서의 회절픽, 자화의 온도 의존성을 분석하였다. 이 결과는 Mn$_3$O$_4$를 출발원료로 사용한 Mn-Zn 페라이트가 투자율 및 한계 주파수 모두 뛰어난 특성을 나타내었다.

• Journal of the Korean Ceramic Society
• /
• v.34 no.4
• /
• pp.351-356
• /
• 1997

The origin of the variation of initial permeability in manganese-zinc ferrite polycrystals with a content of hematite was investigated. Initial permeability showed maximum with hematite content while there was no significant change in microstructure. Saturation magnetization increased with hematite content. So the variation of initial permeability was not explained on the basis of microstructural change or saturation magnetization. Temperature dependence of initial permeability revealed magnetocrystalline anisotropy was the origin of the variation of initial permeability. The change in magnetocrystalline anisotropy was ascribed to the variation in ferrous ion concentration. Therefore the variation of initial permeability in manganese-zinc ferrite polycrystals with a content of hematite was due to ferrous ion concentration via magnetocrystalline anisotropy.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.6
• /
• pp.490-495
• /
• 2003

The electromagnetic properties and thermal behavior of Mn-Zn ferrite cores for the blocking filter of Power Line Communication(PLC) application were investigated as a function of additives. The highest density and permeability were 4.98 g/$\textrm{cm}^2$ and 8,221, respectively and were obtained to the specimen with composition of MnO 24 mol%, ZnO 25 mol% and Fe$_2$O$_3$ mol%, added MoO$_3$ of 400 ppm, SiO$_2$ of 100 ppm, and CaO of 200 ppm. The uniform grains were organized, and the microstructures were densified due to reduction of pores in the specimen. The permeability was increased up to 13,904 as the temperature of specimen increased to 110$^{\circ}C$. However, it was decreased precipitously under 100 over 110$^{\circ}C$. The exothermic behavior was observed in the frequency range from 1 kHz to 1 MHz, and the maximum temperature of specimen was 102$^{\circ}C$ at 1 MHz. In the consequence, the Mn-Zn ferrite core developed in this research will maintain the stable electromagnetic properties since the temperature of ferrite core rose to 93$^{\circ}C$ in the range of 100 kHz to 450 kHz bandwidth qualified for PLC. The blocking filters were designed for single phase and three phases using the in-line and non-contact core. The best attenuation ratios of -46.46 dB and -73.9 dB were measured in the range of 100 kHz to 450 kHz bandwidth, respectively.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.95-98
• /
• 2002

전력선 통신 blocking filter용 자심 재료를 개발하기 위해서 MnO 24 mol%, ZnO 25 mol% and $Fe_{2}O_{3}$ 51 mol% 의 기본조성에 $MoO_{3}$, $SiO_{2}$, CaO를 첨가하여 $1350^{\circ}C$에서 대기압 상수 A를 7.8롤 고정하고 소결하여 미세구조를 제어하였으며 기본 조성에 $MoO_{3}$ 400 ppm, $SiO_{2}$ 100 ppm and CaO 200 ppm을 첨가한 경우 평균 입경 $25{\mu}m$ 의 균일한 결정립으로 구성된 미세구조를 얻었고 기공의 감소에 의한 치밀화로 $4.98g/cm^{2}$의 고밀도화가 이루어 졌다. 또한 소결체의 균일한 미세구조와 고밀도화로 인해서 8221(${25^{\circ}C}$, 1 KHz) 의 가장 높은 투자율 특성을 나타냈다. 시편의 온도가 증가함에 따라 투자율이 증가되어 ${110^{\circ}C}$에서 13904의 거대 투자융이 측정되었고, 코일의 인가주파수가 1 KHz에서 1 MHz까지 증가됨에 따라 최고 ${102^{\circ}C}$까지 시편 온도가 상승하였다. 가장 높은 투자율 특성을 나타낸 ferrite 코어를 사용하여 단상 및 3상용 블로킹 필터의 감쇄율을 측정한 결과 현재 국내의 전력선 통신용 주파수 대역으로 규정되어 있는 10 KHz ~ 450 KHz 대역에서 각각 -46.46 dB와 -73.9 dB의 최고 값을 얻었다.

• Journal of the Korean Magnetics Society
• /
• v.11 no.1
• /
• pp.26-31
• /
• 2001

The effect of MoO$_3$ addition on the permeability of Mn-Zn ferrites was studied. 600 ppm, 800 ppm and 1,000 ppm of MoO$_3$ were added to the main composition after calcination. Ferrite cores were sintered at 135$0^{\circ}C$ for 3hrs, followed by cooling according to the equilibrium oxygen concentration. The initial permeability was about 8,000 with heating rate 5$^{\circ}C$/min for 3hrs without MoO$_3$ addition. When 600 ppm and 800 ppm of MoO$_3$ were added, the initial permeabilities, 13,200 and 13,550 were obtained, respectively. However, the sample with 1,000 ppm MoO$_3$ showed lower permeabilities because of abnormal grain growth. At the heating rate 1$0^{\circ}C$/min, the ferrite cores with 1,000 ppm MoO$_3$ demonstrated the highest initial permeability greater than 15,000, without exaggerated grain growth.