• Journal of Soil and Groundwater Environment
• /
• v.18 no.7
• /
• pp.63-72
• /
• 2013

This study estimated stabilization efficiency of As and heavy metal contaminated agricultural soil in abandoned mine through pot experiment. Also contaminants uptake of plant (lettuce) was compared as function of amendment (limestone, steelmaking slag and the mixture of these) addition. In soil solution analysis, concentration of contaminants in soil solutions which added limestone or steelmaking slag were lower than that of the mixture. Especially in As analysis, concentration with 5% (wt) addition of steelmaking slag showed the lowest value among those with other amendments. This seems that As stabilization happens through Fe adsorption during precipitation of Fe by pH increasing. Leachability of As in stabilized soil by TCLP was represented similar result with soil solution analysis. However leachability of heavy metals in stabilized soil was similar with that of non-stabilized soil due to dissolution of alkali precipitant by weak acid. Contaminants uptake rate by plant was also lower when limestone or steelmaking slag was used. However this study revealed that concentration of contaminants in soil solution didn't affect to the uptake rate of plant directly. Because lower $R^2$ (coefficient of determination) was represented in linear regression analysis between soil solution and plant.

• Journal of Environmental Science International
• /
• v.28 no.8
• /
• pp.655-667
• /
• 2019

This research aims to identify the possibility of developing A horizon resources that can be used for construction and civil engineering work. As such, the utility of A horizon resources was examined by establishing planting ground through a mixture of soil layers and by analyzing the growth and development of Pinus densiflora. The physicochemical and physical properties of the soil were as follows: the A horizon was sandy clay loam, B horizon was sandy loam, and the mixture of two layers appeared as sandy loam, which was identical to the B horizon. The experimental groups did not show any significant difference in their physical properties of porosity and degree of water-stable aggregates. With regards to chemical properties, the A horizon as well as the mixture of A and B horizon showed acidity while the B horizon showed alkalinity. The figures of organic matter, total nitrogen, available phosphate, and replaceable potassium were greater as the A horizon content increased, whereas the figures of replaceable calcium, replaceable magnesium, and conductivity increased as the A horizon content decreased. As a result of the growth and development of Pinus densiflora in each planting ground, the final survival rates were all above 100%. However, the tree height and the rate of growth for the diameter of root were higher in the order of A horizon > A horizon + B horizon > B horizon,indicating that the increased A horizon content is related to the growth and development of Pinus densiflora. The treatment of soil with improvement agents, used to recover the functions of in-situ soil showing poor growth and development, did not have a clear impact on the soil texture and porosity. However, the degree of water-stable aggregates increased significantly when using O horizon as the soil improvement agent among the types of in-situ soil. In contrast, all items related to the chemical properties showed significant differences following the treatment by soil improvement agents. The survival rate according to the treatment of soil improvement agents for the growth and development of Pinus densiflora was higher in the order of organic horizon = no treatment > compound fertilizer > organic fertilizer + compound fertilizer > organic fertilizer; this result was statistically significant with a marginal significance value of the log-rank test(p < 0.05).

• Korean Journal of Soil Science and Fertilizer
• /
• v.44 no.4
• /
• pp.581-590
• /
• 2011

Organic farming is rapidly expanding worldwide. Crop growth in organic systems greatly depends on the functions performed by soil microbes, and nutrient supply weed suppression by green manure crops input. Four red-pepper production systems were compared: 1) bare ground (conventional system); 2) hairy vetch monoculture; 3) rye monoculture; and 4) hairy vetch-rye mixture. Soil inorganic N reached the peak at 30 DAI and hairy vetch monoculture was the highest ($192mg\;kg^{-1}$) and soil total carbon was fluctuated sporadically during the experiment. Carbohydrate and phenolic compounds in soil kept significantly higher in green manure crops systems from 10 DBI to 30 DAI, however the level was the maximum at 10 DBI (carbohydrate) and 30 DAI (phenolic comounds). Incorporation of green manure crops residue enhanced soil microbial biomass C and N throughout the growing season except that MBN in rye was reduced after incorporation. Green manure crops systems suppressed weed occurrence and, in particular, it was prominent in rye monoculture. Mineral elements composition and production in red-pepper fruits were markedly decreased in green manure crops systems although hairy vetch monoculture has come close to bare ground (NPK-applied). Therefore, it was suggested that higher biomass production should be performed not only to improve soil quality and suppress weeds but to yield suitable red-pepper fruits in green manure crops-based organic farming.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.419-422
• /
• 2004

This paper was carried out desertification area change detection from 1980s to 2000s per unit decade using by multitemporal satellite images (Landsat MSS, TM, ETM+). This study aims to use Spectral Mixture Analysis (SMA) to identify and classify study area. Endmembers is selected bare soil, green vegetation (GV), water body using by Minimum Noise Fraction (MNF). Endmembers used to generate increase and decrease images respective from 1980s to 1990s and from 1990s to 2000s. From the analysis of multitemporal change detection for three periods, it was apparent that the area of bare soil increased significantly, with simultaneous decrease of GV and water body. The multitemporal fraction images can be effectively used for change detection. Though there is no field survey dataset, SMA is reliable result of change detection in desertification in China.

• Geomechanics and Engineering
• /
• v.14 no.6
• /
• pp.533-544
• /
• 2018

The importance of using materials cost effectively to enhance the strength and reduce the cost, and weight of earth fill materials in geotechnical engineering led researchers to seek for modifying the soil properties by adding proper additives. Lightweight fill materials made of soil, binder, water, and Expanded polystyrene (EPS) beads are increasingly being used in geotechnical practices. This paper primarily investigates the behavior of sandy soil, modified by EPS particles. Besides, the mechanical properties of blending sand, EPS and the binder material such as fly ash and cement were examined in different mixing ratios using a number of various laboratory studies including the Modified Standard Proctor (MSP) test, the Unconfined Compressive Strength (UCS) test, the California Bearing Ratio (CBR) test and the Direct Shear test (DST). According to the results, an increase of 0.1% of EPS results in a reduction of the density of the mixture for 10%, as well as making the mixture more ductile rather than brittle. Moreover, the compressive strength, CBR value and shear strength parameters of the mixture decreases by an increase of the EPS beads, a trend on the contrary to the increase of cement and fly ash content.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.1018-1031
• /
• 2010

In order to investigate the applicability and suitability of the industrial by-products to landfill final cover, field pilot-scale lysimeter experiments were carried out. The mixture of loamy soil, bottom ash, and construction waste was placed as a cover material in lysimeter($2m{\times}6m{\times}1.2m$) which were constructed with cement brick, and then, volumetric water contents, pF value, and the quantity of runoff and seepage of treatment boxes filled with the mixture of loamy soil and the industrial by-products were monitored from July, 2007 to February, 2008. Among the cases tested, consequently, the case containing the mixture of bottom ash and loamy soil was most effective in engineering and hydrological properties and water retention ability.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.10a
• /
• pp.1655-1665
• /
• 2008

In order to investigate the applicability and suitability of the industrial by-products to landfill final cover, field pilot-scale lysimeter experiments were carried out. The mixture of loamy soil, bottom ash, and construction waste was placed as a cover material in lysimeter($2m{\times}6m{\times}1.2m$) which were constructed with cement brick, and then, volumetric water contents, pF value, and the quantity of runoff and seepage of treatment boxes filled with the mixture of loamy soil and the industrial by-products were monitored from July, 2007 to February, 2008. As a result, the case containing the mixture of bottom ash and loamy soil was most effective in engineering and hydrological properties and water retention ability.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.20 no.1
• /
• pp.4575-4591
• /
• 1978

In order to investigate the effects of grain size distribution, cement content, and molding pressure on the strength and durability of soil-cement mixtures, a laboratory test of soil cement mixtures was performed at four levels of cement content, five levels of molding pressure, and four levels of normal curing periods. The results are summarized as follows: 1. Optimum moisture contents in loam soil and maximum dry density in sand soil increased with the increase of cement content, but in others, both optimum moisture contents and maximum dry density were changed ununiformly. 2. When the specimens were molded with molding pressure, 50kg/$\textrm{cm}^2$, strength of soil cement mixture with cement content, 2 and 4 per cent, was lower than the strength of soil cement mixture without cement content by more than 40 to 50 per cent. 3. The strength of soil-cement molded with molding pressure, 100kg/$\textrm{cm}^2$, was higher than the strength of soil-cement molded with M.D.D. obtained from standard compaction test more than 40 per cent in sand loam cement and 50 per cent in loamy cement. 4. There was highly significant positive correlation among molding pressure, cement content and unconfined compressive strentgh and so the following multiple regression equations were obtained. Loam: fc=1.9693C+0.197P-0.84 Sandy loam: fc=2.9065C+0.235P-0.77 5. When the specimens were molded with molding pressure, 20 to 100kg/$\textrm{cm}^2$, the regression equation between the 28-day and 7-day strenght was obtained as follows. Loam : q28=1.1050q7+7.59(r=0.9147) Sandy loam : q28=1.3905q7+3.17 (r=0.9801) 6. At the cement contents of above 50 per cent, the weight losses by freeeze-thaw test were negligible. At the cement content of below 8 per cent the weight losses were singnificantly high under low molding pressure and remarkably decreased with the increase of molding pressure up to 80kg/$\textrm{cm}^2$. 7. Resistance to damage from water and to absorption of water were not improved by molding pressure alone, but when the soil was mixtured with cement above 6 per cent, damage seldoms occurred and absorbed less than 5 per cent of water. 8. There was highly significant inverse-corelationship between the compressive strength of soil cement mixtures and their freeze-thaw loss as well as water absorption. By the regression equation methods, the relationships between them were expessed as followed fc=-7.3206Wa+115.6(r=0.9871) log fc=-0.0174L+1.59(r=0.7709) where fc=unconfined compressive stregth after 28-days curing. kg/$\textrm{cm}^2$ Wa=water absorption, % L : freeze-thaw loss rate, %

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.09a
• /
• pp.1190-1200
• /
• 2010

A method was developed to determine resilient modulus for crushed rock-soil mixtures whose usage has been increased recently without engineering specifications. The method is based on the subtle different modulus called nonlinear dynamic modulus and was lately implemented in residual soils and engineered crushed-stones. Hereby. the same method was expanded to crushed rock-soil mixtures containing as large grain diameter as 300mm. The method utilize field direct-arival tests for the determination of maximum Young's modulus, and a large scale free-free resonant column test, which is recently developed to is capable to test as large grain diameter as 25mm, for modulus reduction curves. The prediction model of resilient modulus was evaluated for crushed rock-soil mixtures of a highway construction site at Gimcheon, Korea.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.971-980
• /
• 2010

Evaluation of permeability and coefficient of consolidation of clayey sand is critical to analyze ground stability or environmental problems such as diffusion and dispersion in groundwater flow. Permeability tests using a flexible wall permeameter were performed to derive the coefficient of consolidation and permeability of reconstituted soil samples with various mixing ratios of kaolin clays and two different types of sands, Jumunjin sand and Ottawa sand. The test results indicated that coefficient of consolidation and permeability in log scale have linear relationships with clay contents in low clay mixing ratio. It is also recognized that coefficient of consolidation and permeability of sand and clay mixture are also dependent on the soil structure.