• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.45 no.2
• /
• pp.146-153
• /
• 2012

This study examined the effect of formulated diets (composed of condensed freshwater $Chlorella$ or $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil sources derived from baker's yeast) on the population growth and fatty acid composition of the brackish water flea ($Diaphanosoma$ $celebensis$) to determine diet effectiveness for mass production. Results indicated that the highest maximum density, fecundity, and population specific growth rate (SGR) of the flea were observed using a diet of $Tetraselmis$ $suecica$ (control). However, results using condensed freshwater $Chlorella$ and the mixed treatment of $Schizochytrium$ sp.+$Crypthecodinium$ sp.+EPA oil did not significantly differ from the control treatment ($P$>0.05). Thus, $T.$ $suecica$ could be replaced with a combination diet of $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil in condensed freshwater $Chlorella$ without growth interruption of $D.$ $celebensis$. As the percentage of combination diet (mix of $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil) in condensed freshwater $Chlorella$ increased, the level of ARA, EPA, DHA, and n-3 HUFA in $D.$ $celebensis$ also increased. However, the population density of $D.$ $celebensis$ sharply decreased with the use of treated supplements C5M5 (CHL [50%] and $Crypthecodinium$ sp.+ $Schizochytrium$ sp. + EPA oil [MIX 50%]). The optimum proportions of CHL and MIX for $D.$ $celebensis$ within the mixture were 70% and 30%, respectively. Based on the results, the combination of $Schizochytrium$ sp., $Crypthecodinium$ sp., and EPA oil in condensed freshwater $Chlorella$ appears to be a stable and effective food source for mass production of $D.$ $celebensis$.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.16-21
• /
• 2017

The aim of this study was to utilize ferronickel slag produced in the manufacture of stainless steel as a flowable backfill material for underground use using crushed fine powder. Experimental combinations were made using two components: Case A (sand) and Case B (soil). The optimal mixing ratio of Case A was sand (58.4%), ferronickel slag fine powder (21.6%), cement (1.8%), and water (18.2%). In the case of B, the optimal mixing ratio was determined to be soil (53.0%), ferronickel slag fine powder (20.0%), cement (1.7%), and water (25.3%). The uniaxial compressive strength of case A, which is a mixture of ordinary sand and ferronickel slag powder, was relatively larger than that of case B using soil. In addition, the strength of the specimen increased with increasing curing time. The uniaxial compressive strength tended to increase with increasing curing time. In addition, the unconfined compression strength of the fluid backfill material using common sand as the main material was relatively larger than that of the mixed material using soil as the main material. In case A, the uniaxial compressive strength ranged from 0.17-0.33 MPa, 0.21-0.39 MPa, and 0.19-0.40 MPa, respectively, at curing times of 7, 14, and 28 days. From the experimental results, it was concluded that the ratio of FNS powder and cement mixture was the most appropriate for Case A3. Case B, which used soil as the main material, showed a similar tendency to Case A. As a result of the dissolution test for evaluating the environmental harm of the FNS fine powder, there was no dissolution of substances harmful to the environment.

• Journal of Labour Economics
• /
• v.29 no.3
• /
• pp.1-23
• /
• 2006

This study investigates the effects of inward foreign direct investment on local workers' wages by focusing on U.S. manufacturing industries for the period from 1987 to 1992. Contrary to public perception that foreign ownership is positively associated with higher wages, previous studies show mixed results. Since most of the previous studies used industry or firm level average wages, they can not control for the impact of individual characteristics on wages. I use two different approaches to control individual characteristics and to implement estimation in this study: (1) One-step estimation with industry-state level of inward foreign direct investments by using individual level data, and (2) Two-step industry characteristic regression approach. The higher presence of foreign firms is associated with higher local wages after workers' observable characteristics are controlled for in the first approach. This effect, however, disappears once workers' industry affiliations and regions are controlled for in cross-section analysis. In a panel data analysis, I did not find any statistically significant positive association between inward FDI activities and industry wage premiums within industry. Further, inward FDI activities appeared to be negatively associated with worker's industry wage premium for workers with more than high school education.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.7
• /
• pp.297-306
• /
• 2017

Citizens want more accurate forecast information using Bus Information System. However, most bus information systems that use an average based short-term prediction algorithm include many errors because they do not consider the effects of the traffic flow, signal period, and halting time. In this paper, we try to improve the precision of forecast information by analyzing the influencing factors of the error, thereby making the convenience of the citizens. We analyzed the influence factors of the error using BIS data. It is shown in the analyzed data that the effects of the time characteristics and geographical conditions are mixed, and that effects on halting time and passes speed is different. Therefore, the halt time is constructed using Generalized Additive Model with explanatory variable such as hour, GPS coordinate and number of routes, and we used Hidden Markov Model to construct a pattern considering the influence of traffic flow on the unit section. As a result of the pattern construction, accurate real-time forecasting and long-term prediction of route travel time were possible. Finally, it is shown that this model is suitable for travel time prediction through statistical test between observed data and predicted data. As a result of this paper, we can provide more precise forecast information to the citizens, and we think that long-term forecasting can play an important role in decision making such as route scheduling.

• Journal of Acupuncture Research
• /
• v.21 no.1
• /
• pp.1-20
• /
• 2004

Pulse-feeling took its origin from making a diagnosis along meridians in the course of discovering and forming meridians and for a long time its meaning was mixed with meridians in the course of recognizing "The Pulse" then was separated from meridians in the early days of Western Han Dynasty. Ancient pulse-feeling methods are pulse-feeling method by the twelve regular meridians, pulse-feeling method by three regions and nine modes, pulse-feeling method by Inyeong(人迎) and Chon-gu(寸口), etc. Pulse-feeling was changed in proportion to diagnostic purpose and method of treating and if method and region of pulse-feeling is arranged, we will infer correlation between meridians and pulse-feeling and will infer transitional system of past pulse-feeling and will forecast transition of future pulse-feeling. As the result that I study the transition of the above three pulse-feeling methods of meridians diagnosis: 1. Three pulse-feeling methods of meridians diagnosis flowed into diagnostic method by taking pulse of setting six region for Chon(寸), Gwan(關) and Cheok(尺), i.e. the Chon[寸] spot pulse of $\ll$Nan-gyeong$\gg$ and were changed into diagnostic method being fit for use of five Su points, The Front-Mo points and Back-Su points that grasp the pathology of mutual internal organs and treat the disease. 2. Today it is suggesting the transition of another pulse-feeling method that do not apply diagnostic method by taking pulse of setting six region for Chon(寸), Gwan(關) and Cheok(尺), i.e. the Chon[寸] spot pulse of $\ll$Nan-gyeong$\gg$ to 19C Sasang(四象) Constitutional Medicine or 20C Eight Constitutional Medicine.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.29 no.2
• /
• pp.123-127
• /
• 2003

Chemical burns onto oral mucosa which are infrequent, may result from contact with a wide variety of chemical agents. The degree of injury depends on the chemical, its concentration, duration of contact, and the natural penetrability and resistance of the tissues involved. Chemicals do not usually "burn" in that they do not cause destruction by hyperthermic activity. Rather, they damage tissue by causing coagulation of protein by one of several processes, reduction, oxidation, desiccation, corrosion, or vesication. Paraquat(Gramoxon) is the most frequently agricultural chemicals that induce the severe toxic reactions onto the organs of human body in Korea. The toxic reaction are composed of pulmonary edema and fibrosis, formation of hyaline membrane, inflammatory reaction and bleeding tendency, owing to the cell damage by the production of superoxide radicals. The contents of essential treatment in paraquat intoxication are commonly airway and breathing maintenance, gastric lavage, much hydration and diuresis, hemoperfusion and medications for the removal of the chemicals and the prevention of various complications. The sedative oral dressings, such as, orabase ointment application, warm saline gargling, lidocaine viscous gargling and oral gargling by the mixed solutions(tetracycline, prednisolone and 10% dextrose water) are important for the improvement of chemical oral mucositis and the comfortable feeding of diet. The authors managed properly two cases of oral chemical mucositis that were occurred by the incorrect use of agricultural chemicals(paraquat) and report the cases with the review of literatures about care of the chemical intoxication and oral mucositis.

• Journal of the Korean Arthroscopy Society
• /
• v.17 no.1
• /
• pp.38-43
• /
• 2013

Purpose: To evaluate the efficiency of arthroscopic treatment for infected total knee arthroplasty (TKA), and to investigate the factors affecting the outcomes. Materials and Methods: We analyzed 17 cases which underwent arthroscopic treatment to treat infection after TKA. After confirming infection by hematologic examination and analysis of joint fluid, we performed arthroscopic debridement, synovectomy and irrigation with normal saline mixed with antibiotics. Through routine examination after operation, we checked failure of treatment or recurrence of infection. If there is no recurrence until 2 years after the operation, we considered it as a success of treatment. Results: Of the 17 cases taken arthroscopic treatment, 13 cases were treated successfully with primary arthroscopic treatment only, but 4 cases had to undergo re-operation because of persistence or recurrence of infection. Analyzing the factors affecting the results, we found that symptom duration of the re-operation group is longer than the treated group after arthroscopy (p<0.05). Conclusion: Arthroscopic treatment can be effective when we performed appropriate selection of patients, careful and extensive arthroscopic irrigation and debridement, and suitable use of antibiotics. However, we have to do early arthroscopic surgery as soon as possible when infection after TKA is suspected.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.2 no.3
• /
• pp.1-15
• /
• 1999

This study was carried out to find out the way to build a comprehensive wetland ecosystem database using the technique of remote sensing and geographic information system. A Landsat TM image taken in May 17, 1997 was used for the primary source for the image analysis. Field surveys were conducted March to September of 1998 to help image analysis and examine the results. An actual wetland vegetation map was created based on the field survey. A Landsat TM image was analyzed by unsupervised and supervised classification methods and finally categorized into such 5 classes as Phragmites australis community, mixed community, sand beach, Scirpus trigueter community and non-vegetation intertidal area. Wetland basemap was developed for the overall accuracy assesment in wetland mapping. Vegetation index map of wetland vegetation was developed using NDVI(normalized difference vegetation index). The map of wetland productivity was developed based on the productivity of Phragmites australis and the relationship to the proximity of adjacent water bodies. The map of potential vegetation succession map was also developed based on the experience and knowledge of the field biologists. Considering these results, it is possible to use the remote sensing and GIS techniques for producing wetland ecosystem database. This study indicated that these techniques are very effective for the development of the national wetland inventory in Korea.

• Journal of Environmental Science International
• /
• v.18 no.12
• /
• pp.1437-1442
• /
• 2009

Recent studies have shown that alum addition to litter results in many environmental and economic advantages, such as reductions in metal runoff, lower ammonia emission and improved poultry performance. However, no research has been conducted to evaluate the effects of different types of alum on soluble metals in poultry litter. The objective of this study was conducted to investigate changes in soluble metal from poultry litter with different types of aluminum sulfate (alum) under laboratory condition. The treatments used in this study, which were mixed in the upper 1 cm of litter or sprayed onto the litter surface, were 4 g alum, 8 g alum, 8.66 g liquid alum, 17.3 g liquid alum, 11.2 g A7 (high acid alum), and 22.4 g A7 (high acid alum)/100 g litter. Applying different types of alum to poultry litter reduced (P<0.05) concentrations of soluble Fe (9 to 54%), Cu (9 to 49%) and Zn (11 to 40%), relative to untreated litter, whereas it increased Ca and Mg (P<0.05). Mean soluble Fe and Cu levels in poultry litter from different types of alum decreased in the order: 22.4 g A7 (54% and 49%) > 17.3 g liquid alum (48% and 42%) > 8 g alum (48% and 31%) > 4 g alum (28% and 10%) > 8.6 g liquid alum (10% and 9%) > 11.2 g A7 (8.6% and 9%). Additionally, the high reduction in soluble Zn concentration was 4 g alum (40%), followed by 8 g alum (26%), 22.4 g A7 (25%), 17.3 g liquid alum (23%), 8.66 g liquid alum (18%), and 11.2 g A7 (11%), respectively. In conclusion, the current studies suggest that treating poultry litter with different types of alum can be applied to reduce soluble metal (Fe, Cu, and Zn) and to develop a production to merchandise for poultry litter that would result in reduction in pollutants from these materials. Furthermore, in order to improve environmental management in the poultry industry, the use of alum, liquid alum and high acid alum all should be provided a valid means of reducing negative environmental impact.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.4
• /
• pp.546-554
• /
• 2007

Statement of problem: Die materials require abrasion resistance, dimensional stability with time, and high surface wettability for adequate material properties. Wear of gypsum materials is a significant problem in the fabrication of accurately fitting cast prosthetic devices. So It has been recommended that the use of die hardener before carving or burnishing of the wax pattern. Purpose: The purpose of this study was to compare the abrasion resistance and surface microhardness(Knoop) with 3 commonly used gypsum die materials(MG Crystal Rock, Super plumstone, GC $FUJIROCK^{(R)}$ EP) with and without the application of 2 die hardeners. Material and methods: Three die materials were evaluated for abrasion resistance and surface microhardness after application of 2 die hardeners(Die hardener and Stone die & plaster hardener). Thirty specimens of each gypsum material were fabricated using an impression of resin die(Pattern resin; GC Corporation, Japan) with 1-mm high ridges, sloped 90 degrees. Gypsum materials were mixed according to manufacturer's recommendations and allowed to set 24 hours before coating. Specimens were arbitrary assigned to 1 of 3 treatment subgroups (n=10/subgroup): no treatment(control), coated with Die hardener, and coated with Stone die & plaster hardener. Abrasion resistance(measured by weight loss) was evaluated using device in 50g mass perpendicular to the ridges. Knoop hardness was determined by loading each specimen face 5 times for 15 seconds with a force of 50g. A scanning electron microscope was used to evaluate the surface of specimens in each treatment subgroup. Conclusions: The obtained results were as follows: 1. 3 types of die stone evaluated in this study did not show significant differences in surface hardness and abrasive resistance(P<.05). 2. In the abrasive resistance test, there were no significant differences between GC $FUJIROCK^{(R)}$ EP and MG Crystal Rock with or without 2 die hardener(P<.05). 3. Super plumstone treated with Stone die & plaster hardener showed increased wear loss(P<.05) 4. Die hardener coatings used in this study decreased the surface hardness of the gypsum material(P<.05).