Browse > Article
http://dx.doi.org/10.5762/KAIS.2017.18.5.16

Characterization of Flowable Fill with Ferro-Nickel Slag Dust  

Lee, Kwan-Ho (Dept. of Civil Engineering, Kongju National University)
Publication Information
Journal of the Korea Academia-Industrial cooperation Society / v.18, no.5, 2017 , pp. 16-21 More about this Journal
Abstract
The aim of this study was to utilize ferronickel slag produced in the manufacture of stainless steel as a flowable backfill material for underground use using crushed fine powder. Experimental combinations were made using two components: Case A (sand) and Case B (soil). The optimal mixing ratio of Case A was sand (58.4%), ferronickel slag fine powder (21.6%), cement (1.8%), and water (18.2%). In the case of B, the optimal mixing ratio was determined to be soil (53.0%), ferronickel slag fine powder (20.0%), cement (1.7%), and water (25.3%). The uniaxial compressive strength of case A, which is a mixture of ordinary sand and ferronickel slag powder, was relatively larger than that of case B using soil. In addition, the strength of the specimen increased with increasing curing time. The uniaxial compressive strength tended to increase with increasing curing time. In addition, the unconfined compression strength of the fluid backfill material using common sand as the main material was relatively larger than that of the mixed material using soil as the main material. In case A, the uniaxial compressive strength ranged from 0.17-0.33 MPa, 0.21-0.39 MPa, and 0.19-0.40 MPa, respectively, at curing times of 7, 14, and 28 days. From the experimental results, it was concluded that the ratio of FNS powder and cement mixture was the most appropriate for Case A3. Case B, which used soil as the main material, showed a similar tendency to Case A. As a result of the dissolution test for evaluating the environmental harm of the FNS fine powder, there was no dissolution of substances harmful to the environment.
Keywords
Ferro-Nickel Slag; Flowable Backfill; Optimim Mixing Ratio; Compressive Strength; Flowability;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Cho, B. S., Lee, H. H., Choi, Y. W., Park, D. C., Choi, Y. C., "A Study on Performance of Concrete using FeNi Slag Aggregate", KCI Fall Conference, Korean Concrete Institute, pp. 583-584, 2014.
2 Choi, Y. W., Park, M. S., Lee, K. M., Bae, S. H., Kim, J. S., "Evaluation of Optimum Mixing Rate and Durability of Concrete Using Water Granulated Slag Fine Aggregate", Journal of Korean Recycled Construction Resource Institute, Vol. 3, No. 1, pp. 120-127, 2011.
3 Kim, E. Y., Choi, S. W., Kim, V., Li, Y., Park, J. H., "The Dissolution of Magnesium and Iron from Ferronickel Slag Depending on Aging Condition", Journal of Applied Chemical Engineering, Vol. 24, No. 2, pp. 350-356, 2013.
4 Park, K., Kim, D., Kim, B., Go, Y., "Effect of Ferro-Nickel Slag on Contamination of Soil and Water", Journal of Korean Geosynthetics Society, Vol. 12, No. 4, pp. 21-33, 2013. DOI: https://doi.org/10.12814/jkgss.2013.12.4.021   DOI
5 ASTM, "Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders", ASTM D 4832-16, 2016.
6 Kim, P. S., "The Study on Performance Evaluation of Eco-friendly Concrete using Ferro-Nickel Slag for Fine Aggregate", Master Thesis, Hanyang University, 2013.