• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.16 no.2
• /
• pp.125-132
• /
• 1983

Dielectric properties of sardine-starch paste with moisture content of 4 to $13\%$ were investigated as functions of moisture and frequency. And the effects of the levels of fat and starch of the mixtures upon dielectric permittivity, critical moisture, were also mentioned. In addition, a theoretical prediction of frequency dependence of dielectric constant which was computed by the lumped circuit of two layer condenser model was evaluated. For the preparation of sardine-starch paste, comminuted sardine meat was washed thoroughly several times in chilled water by soaking and decanting, and finally centrifuged. This procedure was extended longer to provide a low fat sample. The centrifuged meat was mixed with adequate amounts of starch and salt, and ground for 25 minutes in a stone mortar, moulded in the form of disk with 7cm diameter and 1.2cm thickness and then freeze dried. Dried meat disks were cut off for the size of 5.5cm diameter and 1.0cm thickness and their moisture contents were controlled in humidified desiccators with saturated solutions. Dielectric constants of sardine-starch paste tended to decrease frequency was increased showing a critical charge at the moisture called critical moisture content. In case of the sample with $20\%$ starch and $2\%$ salt an average complex permittivity($\epsilon^{\ast}$) at 7 to $8\%$ morsture as the critical moisture content was presented; $\epsilon^{\ast}$=3.37+j 0.39 at 0.1 MHz, $\epsilon^{\ast}$=2.54+j 0.19 at 15 MHz, and $\epsilon^{\ast}$=2.15+j 0.08 at 1.8 GHz, respectively. The theoretically obtained complex permittivity values from the two layer condoner model were in close agreement with these actual measurements under the same conditions, that appeared as $\epsilon^{\ast}$=2.53+i 0.09 at 0.1 MHz and $\epsilon^{\ast}$=2.28+j 0.06 at 15 MHz, respectively. The fast level of the mixture also revealed an influence on dielectric property that defatted neat with $1.0\%$ fat showed a higher hc and $\epsilon^{\ast}$ value than the meat with $4.8\%$ fat. Complex permittivity being related to the moisture level remained nearly unchanged or slightly changed at the moisture range of 4 to $8\%$ but was dispersed widely at higher moisture contents.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.9
• /
• pp.1041-1050
• /
• 2011

An elasto-plastic finite element method using the theory of strain gradient plasticity is proposed to evaluate the size dependency of structural plasticity that occurs when the configuration size decreases to micron scale. For this method, we suggest a low-order plane and three-dimensional displacement-based elements, eliminating the need for a high order, many degrees of freedom, a mixed element, or super elements, which have been considered necessary in previous researches. The proposed method can be performed in the framework of nonlinear incremental analysis in which plastic strains are calculated and averaged at nodes. These strains are then interpolated and differentiated for gradient calculation. We adopted a strain-gradient-hardening constitutive equation from the Taylor dislocation model, which requires the plastic strain gradient. The developed finite elements are tested numerically on the basis of typical size-effect problems such as micro-bending, micro-torsion, and micro-voids. With respect to the strain gradient plasticity, i.e., the size effects, the results obtained by using the proposed method, which are simple in their calculation, are in good agreement with the experimental results cited in previously published papers.

• Journal of Korean language education
• /
• v.29 no.1
• /
• pp.1-23
• /
• 2018

This paper investigates how adult Mandarin- and English- speaking learners of Korean perceive Korean vowels, with focus on the effect of the first language (L1) and the second language (L2) acoustic relationship, as well as the influence of Korean language experience. For this study, native Mandarin and Canadian English speakers who have learned Korean as a foreign language, as well as a control group of native Korean speakers, participated in two experiments. Experiment 1 was designed to examine acoustic similarities between Korean and English vowels, as well as Korean and Mandarin vowels to predict which Korean vowels are relatively easy, or difficult for L2 learners to perceive. The linear discriminant analysis (Klecka, 1980) based on their L1-L2 acoustic similarity predicted that L2 Mandarin learners would have perceptual difficulty rankings for Korean vowels as follows: (the easiest) /i, a, e/ >> /ɨ, ʌ, o, u/ (most difficult), whereas L2 English learners would have perceptual difficulty rankings for Korean vowels as follows: (the easiest) /i, a, e, ɨ, ʌ/ >> /o, u/ (most difficult). The goal of Experiment 2 was to test how accurately L2 Mandarin and English learners perceive Korean vowels /ɨ, ʌ, o, u/ which are considered to be difficult for L2 learners. The results of a mixed-effects logistic model revealed that English listeners showed higher identification accuracy for Korean vowels than Mandarin listeners, indicating that having a larger L1 vowel inventory than the L2 facilitates L2 vowel perception. However, both groups have the same ranking of Korean vowel perceptual difficulty: ɨ > ʌ > u > o. This finding indicates that adult learners of Korean can perceive the new vowel /ɨ/, which does not exist in their L1, more accurately than the vowel /o/, which is acoustically similar to vowels in their L1, suggesting that L2 learners are more likely to establish additional phonetic categories for new vowels. In terms of the influence of experience with L2, it was found that identification accuracy increases as Korean language experience rises. In other words, the more experienced English and Mandarin learners of Korean are, the more likely they are to have better identification accuracy in Korean vowels than less experienced learners of Korean. Moreover, there is no interaction between L1 background and L2 experience, showing that identification accuracy of Korean vowels is higher as Korean language experience increases regardless of their L1 background. Overall, these findings of the two experiments demonstrated that acoustic similarity between L1 and L2 sounds using the LDA model can partially predict perceptual difficulty in L2 acquisition, indicating that other factors such as perceptual similarity between L1 and L2, the merge of Korean /o/ and /u/ may also influence their Korean vowel perception.

• The Journal of the Korea Contents Association
• /
• v.19 no.10
• /
• pp.179-189
• /
• 2019

Korea's transportation paradigm is shifting from a vehicle-centered to a pedestrian-oriented society. Therefore, the interest in pedestrian safety and the improvement of pedestrian environment is also increasing. However, the level of traffic safety in Korea is still severe. It is needed to improve pedestrian safety and pedestrian environment. This study studied pedestrian-vehicle accident data provided by the Traffic Accident Analysis System(TAAS) for 2013-2015 to build a safe walking environment around school zones, and the relation between the school zones and pedestrian-vehicle traffic accidents were identified through the geographic information system(GIS) and spatial regression model. The main results are as follows. First, both road and public transportation factors are likely to increase pedestrian traffic accidents in school zones. Second, regarding land-use factors, residential, commercial, and industrial areas are found to increase pedestrian traffic crashes. On the other hand, mixed use is likely to play a role on the reduction of pedestrian traffic accidents. Finally, it has been shown that high development density also has a positive effect on pedestrian traffic accidents in school zones.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.553-581
• /
• 2022

Shortly after tunnel boring machine (TBM) was introduced in the tunneling industry, the use of TBM has surprisingly increased worldwide due to its performance together with the benefit of being safely and environmentally friendly. One of the main cost items in the TBM tunneling in rock and soil is changing damaged or worn cutters. It is because that the cutter change is a time-consuming and costly activity that can significantly reduce the TBM utilization and advance rate and has a major effect on the total time and cost of TBM tunneling projects. Therefore, the importance of accurately evaluating the cutter life can never be overemphasized. However, the prediction of cutter wear in soil, rock including mixed face is very complex and not yet fully clarified, subsequently keeping engineers busy around the world. Various prediction models for cutter wear have been developed and introduced, but these models almost usually produce highly variable results due to inherent uncertainties in the models. In this study, a case study of design and construction of disc cutter change is introduced and analyzed, rather than proposing a prediction model of cutter wear. As the disc cutter is strongly affected by the geological condition, TBM machine characteristic and operation, authors believe it is very hard to suggest a generalized prediction model given the uncertainties and limitations therefore it would be more practical to analyze a real case and provide a detailed discussion of the difference between prediction and result for the cutter change. By doing so, up-to-date idea about planning and execution of cutter change in practice can be promoted.

• Animal Bioscience
• /
• v.34 no.3_spc
• /
• pp.434-442
• /
• 2021

Objective: This study aims to evaluate the influence of dietary flavonoids on the growth performance, blood and intestinal profiles, and carcass characteristics of broilers by employing a meta-analysis method. Methods: A database was built from published studies which have reported on the addition of various levels of flavonoids from herbs into broiler diets and then monitored growth performance, blood constituents, carcass proportion and small intestinal morphology. A total of 42 articles were integrated into the database. Several forms of flavonoids in herbs were applied in the form of unextracted and crude extracts. The database compiled was statistically analyzed using mixed model methodology. Different studies were considered as random effects, and the doses of flavonoids were treated as fixed effects. The model statistics used were the p-values and the Akaike information criterion. The significance of an effect was stated when its p-value was <0.05. Results: Dietary flavonoids increased (quadratic pattern; p<0.05) the average daily gain of broilers in the finisher phase. There was a reduction (p<0.01) in the feed conversion ratio of the broilers both in the starter (linear pattern) and finisher phases (quadratic pattern). The mortality rate tended to decrease linearly (p<0.1) with the addition of flavonoids, while the carcass parameter was generally not influenced. A reduction (p<0.001) in cholesterol and malondialdehyde concentrations (both linearly) was observed, while super oxide dismutase activity increased linearly (p<0.001). Increasing the dose of flavonoids increased (p<0.01) the villus height (VH) and villus height and crypt depth (VH:CD) ratio (p<0.05) in the duodenum. Similarly, the VH:CD ratio was elevated (p<0.001) in the jejunum following flavonoid supplementation. Conclusion: Increasing levels of flavonoids in broilers diet leads to an improvement in growth performance, blood constituents, carcass composition and small intestinal morphology.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.2
• /
• pp.63-81
• /
• 2021

In this study, we investigated the tide-induced flow patterns near the ocean outfall of the Jeju and Bomok Wastewater Treatment Plants (WTP) in Jeju Island by using measurements of Acoustic Doppler Current Meter (ADCP) and a numerical experiment with inserting passive tracer into a regional ocean model. In late spring of 2018, the ADCP measurements showed that tidal currents dominate the flow patterns as compared to the non-tidal components in the outfall regions. According to harmonic analysis, the dominant type of tides is mixed of diurnal and semi-diurnal but predominantly semidiurnal, showing stronger oscillations in the Jeju WTP than those in the Bomok WTP. The tidal currents oscillate parallel to the isobath in both regions, but the rotating direction is different each other: an anti-clockwise direction in the Jeju WTP and a clockwise in the Bomok WTP. Of particular interest is the finding that the residual current mainly flows toward the coastline across the isobath, especially at the outfall of the Bomok WTP. Our model successfully captures the features of tidal currents observed near the outfall in both regions and indicates possibly high persistent pollutant accumulation along the coasts of Bomok.

• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.347-358
• /
• 2019

Lambertian cloud model (Lambertian Cloud Model) is the simplified cloud model which is used to effectively retrieve the vertical ozone distribution of the atmosphere where the clouds exist. By using the Lambertian cloud model, the optical characteristics of clouds required for radiative transfer simulation are parametrized by Optical Centroid Cloud Pressure (OCCP) and Effective Cloud Fraction (ECF), and the accuracy of each parameter greatly affects the radiation simulation accuracy. However, it is very difficult to generalize the vertical ozone error due to the OCCP error because it varies depending on the radiation environment and algorithm setting. In addition, it is also difficult to analyze the effect of OCCP error because it is mixed with other errors that occur in the vertical ozone calculation process. This study analyzed the ozone retrieval error due to OCCP error using two methods. First, we simulated the impact of OCCP error on ozone retrieval based on Optimal Estimation. Using LIDORT radiation model, the radiation error due to the OCCP error is calculated. In order to convert the radiation error to the ozone calculation error, the radiation error is assigned to the conversion equation of the optimal estimation method. The results show that when the OCCP error occurs by 100 hPa, the total ozone is overestimated by 2.7%. Second, a case analysis is carried out to find the ozone retrieval error due to OCCP error. For the case analysis, the ozone retrieval error is simulated assuming OCCP error and compared with the ozone error in the case of PROFOZ 2005-2006, an OMI ozone profile product. In order to define the ozone error in the case, we assumed an ideal assumption. Considering albedo, and the horizontal change of ozone for satisfying the assumption, the 49 cases are selected. As a result, 27 out of 49 cases(about 55%)showed a correlation of 0.5 or more. This result show that the error of OCCP has a significant influence on the accuracy of ozone profile calculation.

• Asian-Australasian Journal of Animal Sciences
• /
• v.18 no.2
• /
• pp.151-157
• /
• 2005

Sheep production is affected by genetic and non-genetic factors. A knowledge of these factors is essential for efficient management and for the accurate estimation of breeding values. The objective of this study was to establish the non-genetic factors which affect birth weight and weaning weight in Dorper, Mutton Merino and indigenous Sabi sheep breeds. A total of 2,625 birth and weaning weight records from Grasslands Research Station collected from 1991 through 1993, were used. The records were collected from indigenous Sabi (939), Dorper (807) and Mutton Merino (898) sheep. A mixed classification model containing the fixed effects of year, birth status and sex was used for identification of non-genetic factors. Sire within breed was included as a random effect. Two factor interactions and three factor interactions were important in indigenous Sabi, Mutton Merino and Dorper sheep. The mean birth weights were 4.37${\pm}$0.04 kg, 4.62${\pm}$0.04 kg and 3.29${\pm}$0.04 kg for Mutton Merino, Dorper and Sabi sheep, respectively. Sire had significant effects (p<0.05) on birth weight in Mutton Merino and indigenous Sabi sheep. Year of lambing had significant effects (p<0.05) on birth weight in indigenous Sabi, Mutton Merino and Dorper sheep. The effect of birth status was non significant in Dorper and Mutton Merino sheep while effect of birth status was significant on birth weight in indigenous Sabi sheep. In Indigenous Sabi sheep lambs born as singles (3.30${\pm}$0.05 kg) were 0.23 kg heavier than twins (3.07${\pm}$0.05 kg), in Mutton Merino lambs born as singles (3.99${\pm}$0.08 kg) were 0.07 kg heavier than twins (3.92${\pm}$0.08 kg) and in Dorper lambs born as singles (4.41${\pm}$0.04 kg) were 0.02 kg heavier than twins (4.39${\pm}$0.04 kg). On average males were heavier than females (p<0.05) weighing (3.32${\pm}$0.04 kg vs. 3.05${\pm}$0.07 kg) in indigenous Sabi, 4.73${\pm}$0.03 kg vs. 4.08${\pm}$0.05 in Dorper and 4.26${\pm}$0.07 kg vs. 3.66${\pm}$0.09 kg in Mutton Merino sheep. Two way factor interactions of sire*year, year*sex and sex*birth status had significant effects (p<0.05) on birth weight in indigenous Sabi, Mutton Merino and Dorper sheep while the effect of year*birth status was non significant on birth weight in Indigenous Sabi sheep. The three way factor interaction of year*sex*birth status had a significant effect (p<0.01) on birth weight in indigenous Sabi and Mutton Merino. Tupping weight fitted as a covariate had significant effects (p<0.001) on birth weight in indigenous Sabi, Mutton Merino and Dorper sheep. The mean weaning weights were 17.94${\pm}$0.31 kg, 18.19${\pm}$0.28 kg and 14.39${\pm}$0.28 kg for Mutton Merino, Dorper and Indigenous Sabi sheep, respectively. Effects of sire and sire*year were non significant on weaning weight in Dorper and Mutton Merino while year, sex and sex*year interaction had significant effects (p<0.001) on weaning weight. On average males were heavier than females (p<0.001) at weaning. The respective weaning weights were 18.05${\pm}$0.46 kg, 18.68${\pm}$0.19 kg, 14.14${\pm}$0.15 kg for males and 16.64${\pm}$0.60 kg, 16.41${\pm}$0.31 kg, 12.64${\pm}$0.32 kg for females in Mutton Merino, Dorper and Indigenous Sabi sheep. Lambs born as singles were significantly heavier at weaning than twins, 0.05 kg, 0.06 kg and 0.78 kg for Mutton Merino, Dorper and Indigenous Sabi sheep, respectively. Effect of tupping weight was highly significant on weaning weight. The three way factor interaction year*sex*birth status had a significant effect (p<0.01) on weaning weight. Correction for environmental effects is necessary to increase accuracy of direct selection for birth weight and weaning weight.

• Information Systems Review
• /
• v.16 no.2
• /
• pp.77-95
• /
• 2014

From the success of TDX and CDMA to today's social media boom, Korea's ICT has achieved an amazing growth for the last couple of decades. However, in spite of ICT's role as an engine of growth in Korea, there have been concerns that ICT growth would negatively affect national employment due to the labor substitution effect. While some scholars insist that ICT would positively affect employment because it will enlarge the size of industry itself, many people blame ICT as a main culprit of rising unemployment rates. In this study, we try to empirically find the true effect of ICT growth on employment in Korea. We use the data of ICT productions, ICT investments, and various industries employments from 1995 to 2011. The methodologies we adopted for this study is Granger causality tests and impulse response functions based on vector autoregression (VAR) model. We find that ICT has negative impact on service industries, while it has positive impact on manufacturing industries. Meanwhile, ICT has no statistically significant impact on ICT industry itself. Since the impacts of ICT on employment are mixed, we can argue that ICT should not be blamed for the main cause of low employment. We suggest a direction of future policies to utilize ICT for vitalizing employments in Korea.