• Korean Journal of Remote Sensing
• /
• v.35 no.3
• /
• pp.347-358
• /
• 2019

Lambertian cloud model (Lambertian Cloud Model) is the simplified cloud model which is used to effectively retrieve the vertical ozone distribution of the atmosphere where the clouds exist. By using the Lambertian cloud model, the optical characteristics of clouds required for radiative transfer simulation are parametrized by Optical Centroid Cloud Pressure (OCCP) and Effective Cloud Fraction (ECF), and the accuracy of each parameter greatly affects the radiation simulation accuracy. However, it is very difficult to generalize the vertical ozone error due to the OCCP error because it varies depending on the radiation environment and algorithm setting. In addition, it is also difficult to analyze the effect of OCCP error because it is mixed with other errors that occur in the vertical ozone calculation process. This study analyzed the ozone retrieval error due to OCCP error using two methods. First, we simulated the impact of OCCP error on ozone retrieval based on Optimal Estimation. Using LIDORT radiation model, the radiation error due to the OCCP error is calculated. In order to convert the radiation error to the ozone calculation error, the radiation error is assigned to the conversion equation of the optimal estimation method. The results show that when the OCCP error occurs by 100 hPa, the total ozone is overestimated by 2.7%. Second, a case analysis is carried out to find the ozone retrieval error due to OCCP error. For the case analysis, the ozone retrieval error is simulated assuming OCCP error and compared with the ozone error in the case of PROFOZ 2005-2006, an OMI ozone profile product. In order to define the ozone error in the case, we assumed an ideal assumption. Considering albedo, and the horizontal change of ozone for satisfying the assumption, the 49 cases are selected. As a result, 27 out of 49 cases(about 55%)showed a correlation of 0.5 or more. This result show that the error of OCCP has a significant influence on the accuracy of ozone profile calculation.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.2
• /
• pp.95-101
• /
• 2019

Purpose: The aim of this study is to evaluate the effects of various primers on the microtensile bond strength (${\mu}TBS$) of resin cements to cobalt-chromium (Co-Cr) dental casting alloy. Materials and methods: Four adhesive primers (Universal primer, Metal primer II, Alloy primer, and Metal/Zirconia primer) and two resin cements (Panavia F2.0, G-CEM LinkAce) were tested. One hundred fifty Co-Cr beams were prepared from Co-Cr ingots via casting ($6mm\;ength{\times}1mm\;width{\times}1mm\;thick$). The metal beams were randomly divided into ten groups according to the adhesive primers and resin cements used; the no-primer groups served as the control (n = 15). After sandblasting with aluminum oxide ($125{\mu}m$ grain), the metal and resin cements were bonded together using a silicone mold. Prior to testing, all metal-resin beams were examined under stereomicroscope, and subjected to the ${\mu}TBS$ test. The mean value of each group was analyzed via one-way ANOVA with Tukey's test as post hoc (${\alpha}=.05$) using SPSS software. Results: The mean ${\mu}TBS$ of all groups was ranged from 20 to 28 MPa. There is no statistically significant difference between groups (P > .05). Mixed failure, which is the combination of adhesive and cohesive failures, is the most prevalent failure mode in both the Panavia F2.0 and G-Cem LinkAce groups. Conclusion: The ${\mu}TBS$ of all tested groups are relatively high; however, the primers used in this study result in no favorable effect in the ${\mu}TBS$ of Panavia F2.0 and G-Cem LinkAce resin cement to Co-Cr alloy.

• Korean Journal of Psychosomatic Medicine
• /
• v.28 no.2
• /
• pp.116-125
• /
• 2020

Objectives : Self-poisoning is the leading cause of visits to the emergency departments after a suicide attempts. This study is aimed to compare the patient characteristics according to the category of drugs ingested by the patients who attempted suicide. Methods : All medical charts were retrospectively reviewed from patients who visited the emergency center, at Seoul Medical Center, due to intentional self-poisoning from April of 2011 to July of 2019. We investigated the information regarding the subtype and quantity of the intoxication drug, how it was obtained, suicidal history, and psychiatric history, as well as, sociodemographic information. Variables were compared between prescription drug (PD) and non-prescription drug (NPD) poisoning groups. Results : The mean age of the NPD poisoning group was significantly lower than that of the PD poisoning group. The patient ratio of those enrolled in national health insurance and living with spouses were significantly higher in the NPD poisoning group. Compared to the NPD poisoning group, the PD poisoning group had a higher incidence of mental illnesses, underlying diseases and ratio of involuntary visit to the emergency department. Among the prescription drugs, the benzodiazepine poisoning group had a higher rate of self-prescription than the non-poisoning group, while the zolpidem poisoning group had a higher rate of the using someone else's prescription than other drugs. Each single drug poisoning group (benzodiazepine, zolpidem, and antidepressant single-agent) had a higher rate of no mental illness than each of the mixed-poisoning group. Conclusions : Guidelines for regulating non-prescription drugs are needed as a matter of suicide prevention. Also, this study suggests that clinicians need to be careful when issuing prescriptions and should suicidal risk according to patients' characteristics, duration of follow-up and type of drug packaging.

• Korean Journal of Mineralogy and Petrology
• /
• v.35 no.2
• /
• pp.111-123
• /
• 2022

Carbonate green rust (CGR) and sulfate green rust (SGR) commonly occur in nature. In this study, CGR and SGR were synthesized through co-precipitation, and their formation mechanisms and physicochemical properties were investigated. X-ray diffraction (XRD) and Rietveld refinement showed both CGR and SGR with layered double hydroxide structure were successfully synthesized without any secondary phases under each synthetic condition. Refined structural parameters (unit cell) for two green rusts were a (=b) = 3.17 Å and c = 22.52 Å for CGR and a (=b) = 5.50 Å and c = 10.97 Å for SGR with the crystallite size 57.8 nm in diameter from (003) reflection and 40.1 nm from (001) reflections, respectively. Scanning electron microscopy/energy dispersive X-ray spectroscopy (SEM/EDS) results showed that both CGR and SGR had typical hexagonal plate-like crystal morphologies but their chemical composition is different in the content of C and S. In addition, Fourier transform infrared (FT-IR) spectroscopy analysis revealed that carbonate (CO₃^2-) and sulfate (SO₄^2-) molecules were occupied as interlayer anions of CGR and SGR, respectively. These SEM/EDS and FT-IR results were in good agreement with XRD results. Changes in the solution chemistry (i.e., pH, Eh and residual iron concentrations (Fe(II):Fe(III)) of the mixed solution) were observed as a function of the injection time of hydroxyl ion (OH^-) into the iron solution. Three different stages were observed in the formation of both CGR and SGR; precursor, intermediator, and green rust in the formation of both CGR and SGR. This study provides co-precipitation methods for CGR and SGR in a way of the stable synthesis. In addition, our findings for the formation mechanisms of the two green rusts and their physicochemical properties will provide crucial information with researches and industrials in utilizing green rust.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.41 no.4
• /
• pp.250-258
• /
• 2021

This study was conducted to investigate the effect of feeding systems on feed intake, weight gain, and fawn performance (Cervus canadensis) and estimation of grazing intensity in Elk doe at pasture. A sixteen Elk doe about 236.2 kg were randomly assigned to two feeding treatments. The treatment consisted of a barn feeding system (BF) and grazing at pasture (GR), and pasture was mainly composed of tall fescue, orchard grass, and Kentucky bluegrass. The moisture content of pasture was 19.51~22.61%, which was similar during experimental periods. The crude protein content was significantly higher from June to July (p<0.05). The contents of neutral detergent fiber and acid detergent fiber ranged 53.65~60.18%, and 26.08~29.10%, respectively. There were no significant differences between feeding systems on supplementary feed intake, but the roughage and total dry matter intake showed significant differences between treatment groups (p<0.05), except for May. In August, roughage intake was dramatically decreased in the GR group due to summer environmental changes. On the other hand, the higher intake of roughage in September might be related to nutrient intake for mammals. There was no difference in body weight between treatment groups, but the fawn performance was significantly higher in the GR group (p<0.05). These results might be suggested that grazing elk doe might positively affect fawn growth. However, it is considered that BF might increase the deer weaning rate during the parturition period, since the lower weaning rate in the GR group compared to the BF group. The grazing intensity of Elk doe was increased from May to July and decreased in August, which was influenced by pasture productivity. The average grazing intensity of Elk doe was found to be 15 heads/ha, which might be controlled by supplementary feeding. Further studies needed that mixed sowing methods and fertilization management in old grazing pastures for improved pasture productivity.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.7
• /
• pp.49-62
• /
• 2022

The hollow modular concrete block reinforced foundation method is one of the ground reinforcement foundation methods that uses hexagonal honeycomb-shaped concrete blocks with mixed crushed rock to reinforce soft grounds. It then forms an artificial layered ground that increases bearing capacity and reduces settlement. The hollow modular honeycomb-shaped concrete block is a geometrically economical, stable structure that distributes forces in a balanced way. However, the behavioral characteristics of hollow modular concrete block reinforced foundations are not yet fully understood. In this study, a bearing capacity test is performed to analyze the reinforcement effectiveness of the hollow modular concrete block through the laboratory model tests. From the load-settlement curve, punching shear failure occurs under the unfilled sand condition (A-1-N). However, the filled sand condition (A-1-F) shows a linear curve without yielding, confirming the reinforcement effect is three times higher than that of unreinforced ground. The bearing capacity equation is proposed for the parts that have contact pressure under concrete, vertical stress of hollow blocks, and the inner skin friction force from horizontal stress by confining effect based on the schematic diagram of confining effect inside a hollow modular concrete block. As a result of calculating the bearing capacity, the percentage of load distribution for contact force on the area of concrete is about 65%, vertical force on the area of hollow is 16.5% and inner skin friction force of area of the inner wall is about 18.5%. When the surcharge load is applied to the concrete part, the vertical stress occurs on the area of the hollow part by confining effect first. Then, in the filled sand in the hollow where the horizontal direction is constrained, the inner skin friction force occurs by the horizontal stress on the inner wall of the hollow modular concrete block. The inner skin friction force suppresses the punching of the concrete part and reduces contact pressure.

• Korean Journal of Organic Agriculture
• /
• v.29 no.4
• /
• pp.601-612
• /
• 2021

This study was conducted to evaluate the appropriate sowing method and mixture seeding rate on germination of Kentucky bluegrass (Poa pratensis L.) and white clover (Trifolium repens L.). The experimental design includes two sowing methods and six mixed seeding per each method: BT₁:BP₀ (broadcast seeding; B, Trifolium repens; T, Poa pratensis; P), BT₁:BP₂, BT₁:BP₃, BT₃:BT₁, BT₂:BP₁, BT₀:BP₁ and ST₁:SP₀ (spot seeding; S), ST₁:SP₂, ST₁:SP₃, ST₃:ST₁, ST₂:SP₁, ST₀:SP₁. The germination was the highest for both species when the seeding rate was higher than other species. In overall, the germination of white clover was higher and faster than Kentucky bluegrass. Two plots, BT₂:BP₁, ST₁:ST₂, were retained the balanced proportion of the germination rate. Therefore, It was suggested, for maintaining the balanced field, it is better to seed white clover twice Kentucky bluegrass on broadcast seeding and Kentucky bluegrass twice white clover on spot seeding. In regard of sowing method, broadcast seeding is better than spot seeding in terms of increasing the germination. It is necessary to supplement the result for real application by long-term monitoring.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.50 no.5
• /
• pp.30-39
• /
• 2022

This study aimed to evaluate the awareness of conservation areas and green resources and analyze their characteristics by utilizing accumulated blog data created for specific places and objects. Among all the conservation areas and resources located in the Seoul metropolitan area, places that can be evaluated were classified, and sites were evaluated by dividing them into ten categories based on the number of blog posts written. As a result of the study, the users' awareness of forests was the highest, and the awareness of conservation areas and green resources was higher in urban areas than suburban areas. The result shows that the conservation areas and green resources located around the metropolitan area serve as natural tourist destinations while being the object of conservation for users. In addition, these results are in the same vein as the research results in domestic and foreign studies on the importance of ecosystem services in urban areas. Unlike existing research methods, this study is meaningful in that it identified the level of user awareness through social media analysis and applied it to evaluating conservation areas and green resources. It can be used as basic data to prepare a management plan considering public interest and awareness or to establish a development plan to increase awareness. In addition, the cumulative amount of blog content used in the study is meaningful in that it can identify and monitor users' interest in the space. However, it was not possible to examine the contents of each blog in detail because it was evaluated based on the amount of social media content. In addition, in the case of conservation areas and green resources, it is necessary to review and supplement the evaluation contents by adding keyword analysis and content analysis for the site to be evaluated as content other than the pure viewpoint of users may be mixed with development issues.

• Journal of Nutrition and Health
• /
• v.56 no.4
• /
• pp.439-453
• /
• 2023

Purpose: Concerns about accelerated aging are regularly being discussed. This study analyzed the dietary status and nutritional intake of college students who are about to enter their 30s and 40s. We further suggest ways to eat healthily. Methods: Totally, 67 students attending Daegu Catholic University were provided with a three-day meal record and analyzed. Results: The average demographics of the subjects were as follows: age 23.2 ± 2.0 years, height 165.1 ± 9.0 cm, weight 65.4 ± 13.6 kg, and BMI 23.5 ± 3.9 kg/m². Overall, 76.3% of the subjects skipped breakfast. The food intake evaluation according to the food group intake pattern and the recommended number of servings determined that 38.3% of the subjects did not consume fruits and dairy products (GMVFDS = 111001), and both men and women lacked all food groups. Analysis of the nutrient intake state revealed lesser nutrient intake than the estimated energy need. Evaluation of the %RDA found that consumption of phosphorus was above the recommended amount, whereas all other nutrients were below the recommended amount. Men had a higher intake rate of phosphorus (p < 0.01), iron (p < 0.001), and sodium (p < 0.05) than women, whereas the intake rate of dietary fiber was higher in women (p < 0.05). Evaluation of the food intake by 22 food categories revealed that intake of regular grains was more in men than in women (p < 0.05) whereas women consumed significantly more mixed grains (p< 0.01). In protein foods, men consumed more meat (p < 0.01), while women consumed more eggs (p < 0.05) and beans (p < 0.05). Evaluating the fruit intake, juices were more frequently consumed by men than by women (p < 0.05). No differences were obtained in food intake and nutrient intake status according to obesity. Conclusion: Based on these results, there is an urgent requirement for attention and support for university cafeterias in order to induce changes in the eating habits of college students. Among other initiatives, this can be achieved by providing diet improvement programs and menus that consider food preferences.

• Journal of Food Hygiene and Safety
• /
• v.38 no.4
• /
• pp.211-216
• /
• 2023

A total of 100 commercially available olive oil products were analyzed for 179 pesticide residues using gas chromatography-tandem mass spectrometry (GC/MS/MS). The olive oil samples were mixed with organic solvents, centrifuged and frozen to remove fat, and pesticide residues were analyzed using the "quick, easy, cheap, effective, rugged, and safe" (QuEChERS) method. The determination coefficient (R²) of the analysis method used in this study was ≥0.998. The detection limit of the method ranged 0.004-0.006 mg/kg and its quantitative limit ranged 0.012-0.017 mg/kg. The recovery rate (n=5) measured at the level ranging 0.01-0.02, 0.1, and 0.5 mg/kg ranged 66.8-119.5%. The relative standard deviation (RSD) was determined to be ≤5.7%, confirming that this method was suitable for the "Guidelines for Standard Procedures for Preparing Food Test Methods". The results showed that a total of 151 pesticides (including difenoconazole, deltamethrin, oxyfluorfen, kresoxim-methyl, phosmet, pyrimethanil, tebuconazole, and trifloxystrobin) were detected in 64 of the 100 olive oil products. The detection range of these pesticide residues was 0.01-0.30 mg/kg. The percentage acceptable daily intake (%ADI) of the pesticides calculated using ADI and estimated daily intake (EDI) was 0.0001-0.1346, indicating that the detected pesticides were present at safe levels. This study provides basic data for securing the safety of olive oil products by monitoring pesticide residues in commercially available oilve oil products. Collectively, the analysis method used in this study can be used as a method to analyze residual pesticides in edible oils.