• Nuclear Engineering and Technology
• /
• 제52권8호
• /
• pp.1732-1741
• /
• 2020

The structural integrity of welded joints in the reactor pressure vessel (RPV) is directly related to the safety of nuclear power plants. The RPV is made from SA508-III steel in a pressurized water reactor. In this study, we investigated the effects of temperature on the tensile and fracture toughness properties of Chinese SA508-III welded joint in different sampling areas in order to provide reference data for structural integrity assessments of RPVs. The specimens used in tensile and fracture toughness tests were fabricated from the base metal (BM), weld metal (WM), and the heat-affected zone (HAZ) in the welded joint. The representative testing temperatures included the ambient temperature (20 ℃), upper shelf temperature (100 ℃), and service temperature (320 ℃). The results showed that temperature greatly affected the fracture toughness (JIC) values for the SA508-III welded joint. The JIC values for BM and HAZ both decreased remarkably from 20 ℃ to 320 ℃. The fracture morphologies showed that the BM and HAZ in the welded joint exhibited fully ductile fracture at 20 ℃, whereas partial cleavage fracture was mixed in ductile fracture mode at 100 ℃ and 320 ℃. The WM exhibited the ductile and cleavage fracture mixed mode at various temperatures, and the JIC values showed slight changes.

• 대한전자공학회논문지SD
• /
• 제47권4호
• /
• pp.75-87
• /
• 2010

표준 CMOS 공정에서 제작 가능한 보호용 싸이리스터 소자와 다이오드 소자를 사용하는 RF IC용 두 가지 입력 ESD 보호회로 방식을 대상으로, 2차원 소자 시뮬레이터를 이용하는 DC 해석, 혼합모드 과도해석 및 AC 해석을 통해 보호용 소자내 격자온도 상승 및 입력버퍼단의 게이트 산화막 인가전압 측면에서의 HBM ESD 보호강도에 대한 심도있는 비교 분석을 시도한다. 이를 위해, 입력 ESD 보호회로가 장착된 CMOS 칩의 입력 HBM 테스트 상황에 대한 등가회로를 구성하고, 5가지 HBM 테스트 모드에 대해 최대 6개의 보호용 소자를 포함하는 혼합모드 과도 시뮬레이션을 시행하고 그 결과를 분석함으로써 실제 테스트에서 발생할 수 있는 문제점들에 대한 상세한 분석을 시도한다. 이 과정에서 보호용 소자 내 바이폴라 트랜지스터의 트리거를 수월케 하는 방안을 제안하며, 두 가지 보호회로 방식에서 내부회로의 게이트 산화막 파괴는 보호용 소자 내에 존재하는 NMOS 구조의 접합 항복전압에 의해 결정됨을 규명한다. RF IC용 입력 보호회로로서의 두 가지 보호방식의 특성 차이에 대해 설명하는 한편, 각 보호용 소자와 회로의 설계와 관련되는 유용한 기준을 제시한다.

• 패션비즈니스
• /
• 제11권5호
• /
• pp.110-123
• /
• 2007

This study aims at analyzing the characteristics and the mode of deconstructionism expressed in fashion design centering on review of literatures and precedent researches. Through the review of previous studies and various articles, three major features with regard to deconstructionism were found: indeterminacy of meaning, decentralization, and inter -textuality. In fashion, the feature of indeterminacy of meaning expressed by non formula way such as unfinished, layering, obi or straight line cutting and it was divided into unstructured and unorganized factors. The feature of decentralization expressed by disorganization of sex, race, culture and humanism such as trans-gender, third world costume, sub-culture, posthumanism. Last, the feature of inter-textuality expressed by employing the fashion texts more than two simultaneously such as mixture of unmatched or unusual various clothing items, fabrics, patterns and styles. Non formality features in fahsion which divided into unstructured and unconstructed factors. The decentering of meaning means that disorganized the existing concepts of sex, race, culture and humanism features in fashion which divided into cross-gender, subculture, and post-humanism. Lastly, the feature of inter-textuality means that employed the fashion text more than two which is classified into factors of mixing mode and mixed styles. Unstructured factors were expressed by destroying the design principles such as balance, harmony and unit in fashion. Unconstructed factors were expressed by ignoring the basic costume structures and components in fashion. Cross-gender was expressed by manish and duality style in fashion and 3rd world costume was expressed by folk costume style. Anti fashion was expressed by anti aesthetics in fashion such as kitch, punk, and hippie styles. Post-human was expressed by futurism and the 4th Sex style in fashion. Mixing mode were expressed by mixture of item, and unmatched materials and pattern in fashion. Mixture of style were expressed by mixture of pastiche expression of various styles.

• 천문학회지
• /
• 제29권spc1호
• /
• pp.389-390
• /
• 1996

The CCDs are widely used in astronomical observations either in direct imaging use or spectroscopic mode. However, the areas of available sensors are too small for large imaging format. One possibility to obtain large detection area is to assemble mosaics of CCD, and drive them simultaneously. Parallel driving of many CCDs together rules out the possibility of individual tuning; however, such optimisation is very important, when the ultimate low light level performance is required, particularly for new, or mixed devices. In this work, a new concept is explored for an entirely novel approach, where the drive waveforms are multiplexed and interleaved. This simultaneously reduces the number of leadout connections and permits individual optimisation efficiently. The digital controller can be designed within a single EPLD (Erasable Programmable Logic Device) chip produced by a CAD software package, where most of the digital controller circuits are integrated. This method can minimise the component. count., and improve the system efficiency greatly, based on earlier works by Han et a1. (1996, 1994). The system software has an open architecture to permit convenient modification by the user, to fit their specific purposes. Some variable system control parameters can be selected by a user with a wider range of choice. The digital controller design concept allows great flexibility of system parameters by the software, specifically for the compatibility to deal with any number of mixed CCDs, and in any format, within the practical limit.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
• /
• pp.268-269
• /
• 2001

반사형 액정표시장치는 저전력 휴대용 표시장치 시장이 급격하게 성장함에 따라 큰 주목을 받고 있다. 현재 반사형 액정표시장치는 밝기면에서 우수한 특성을 갖는 mixed mode TN(MTN)과 reflective TR(RTN)과 같은 단일편광자를 이용한 액정모드를 기본적으로 사용하고 있다. 그러나, 이러한 액정모드는 이중편광자를 이용한 액정모드와 비교해서 dark 상태에서 누설광이 많이 발생하여 대비비가 저하되는 단점이 있다. (중략)

• 센서학회지
• /
• 제18권6호
• /
• pp.461-466
• /
• 2009

This paper represents a piezoelectric ultrasonic linear actuator with flexural vibration mode. The actuator is composed of two piezo ceramics, the elastic body, and the connecting tip. It is driven by the frictional force between the connecting tip and the linear motion guide. Unimorph actuators have flexural vibration. Its middle point is fixed so that suitable to the flexural vibration of $3/2\lambda$. These vibrations contribute to elliptical motion by mixed mode between longitudinal and transverse mode. It was generated when the ultrasonic electrical signals with 90 degree phase difference are applied to two ceramics. A linear movement can be easily obtained using the elliptical motion. The ATILA, FEM simulator has been used to design actuator and verify the kinetic and dynamic analysis. We used the ceramics of $20\times10\times1$ mm size and confirmed the flexural vibration of the $3/2\lambda$ at the 79 kHz through the scanning of 3D-vibrometer. The maximum velocity of actuator was 221 mm/sec and the thrust force of actuator was 2.7 N in 200Vp-p of additional voltage.

• 패션비즈니스
• /
• 제12권6호
• /
• pp.93-106
• /
• 2008

The purpose of this study is to analyze design characteristics of Chanel bags by its type and shape, material, color, pattern, decorations in order to give information about foundation of the development of Korean fashion brand handbags and help suggest predict future handbag trends. The methods of this study are documentary research and demonstrative research. For the documentary research, mainly previous researches and fashion related data were used. For the demonstrative research, the total of 288 design photos of Chanel bag were selected from 2001 S/S season to 2008 F/W season fashion collections of firstview.com., style.com., and mode et mode. The results of this study are as follows; First, type and shape of bags are clutch(30%), flap(25%), shoulder(25%), others(10%), tote(5%), hobo(5%). Second, the material data shows that leather(46%), mixed(18%), fabric(17%), synthetics (10%), patent(3%), others(3%), and suede(2%). Third, the patterns are geometrical(27%), solid(25%), combination(24%), symbolic(11%), abstract(11%), nature(2%). Fourth, the colors are largely monochrome(73%) and multicolor(27%). In case of monochrome, achromatic color(50%) is more than chromatic color(23%). The chromatic color is consisted of YR(9%), Y(9%), R(5%), RP(4%), PB(2%), P(1%), GY(0.5%), BG(0.5%). The multicolor is consisted of similar coloration(12%), contrast coloration(10%), and accent coloration(5%). Fifth, the decoration data shows that metallic(53%), plain(23%), combination(22%), and handcrafted(1%).

• Advances in aircraft and spacecraft science
• /
• 제3권3호
• /
• pp.351-366
• /
• 2016

Macroperforations improve the sound absorption performance of porous materials in acoustic cavities and in waveguides. In an acoustic cavity, enhanced noise reduction is achieved using porous materials having macroperforations. Double porosity materials are obtained by filling these macroperforations with different poroelastic materials having distinct physical properties. The locations of macroperforations in porous layers can be chosen based on cavity mode shapes. In this paper, the effect of variation of macroporosity and double porosity in porous materials on noise reduction in an acoustic cavity is presented. This analysis is done keeping each perforation size constant. Macroporosity of a porous material is the fraction of area covered by macro holes over the entire porous layer. The number of macroperforations decides macroporosity value. The system under investigation is an acoustic cavity having a layer of poroelastic material rigidly attached on one side and excited by an internal point source. The overall sound pressure level (SPL) inside the cavity coupled with porous layer is calculated using mixed displacement-pressure finite element formulation based on Biot-Allard theory. A 32 node, cubic polynomial brick element is used for discretization of both the cavity and the porous layer. The overall SPL in the cavity lined with porous layer is calculated for various macroporosities ranging from 0.05 to 0.4. The results show that variation in macroporosity of the porous layer affects the overall SPL inside the cavity. This variation in macroporosity is based on the cavity mode shapes. The optimum range of macroporosities in poroelastic layer is determined from this analysis. Next, SPL is calculated considering periodic and nodal line based optimum macroporosity. The corresponding results show that locations of macroperforations based on mode shapes of the acoustic cavity yield better noise reduction compared to those based on nodal lines or periodic macroperforations in poroelastic material layer. Finally, the effectiveness of double porosity materials in terms of overall sound pressure level, compared to equivolume double layer poroelastic materials is investigated; for this the double porosity material is obtained by filling the macroperforations based on mode shapes of the acoustic cavity.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.57.1-57
• /
• 2001

The objectives of congestion control in ATM (Asynchronous Transfer Mode) networks are maximum utilization of network resources, acceptable level of low cell loss and fairness among all VCs (Virtual Connections). In this paper, we present a congestion control algorithm which is based on state space model, The proposed controller uses optimal control algorithms (LQR, Mixed-LQR), where control parameters can be designed to ensure the stability of the control loop in a control theoretic sense, over the propagation delay. We show how the control mechanism can be used to design a controller to support ABR service based on feedback of explicit rates. Simulation results are presented to substantiate our claim.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 C
• /
• pp.1120-1122
• /
• 1995

This paper presents a 2-stage, simple, power-efficient 3V CMOS operational amplifier and its equation based design optimization. Because of its simple structure, it is very suitable as a VLSI library cell in analog/digital mixed-mode systems. The op-amp, which contains a constant-$g_m$ rail-to-rail input stage and a simple feedforward class-AB rail-to-rail output stage, is analyzed and the results are presented in the form of design equations and procedures, which provide an insight into the trade-offs among performance requirements. The results of SPICE simulations are shown to agree very welt with the use of design equations.