• Journal of the Korea Safety Management & Science
• /
• v.9 no.4
• /
• pp.129-136
• /
• 2007

This paper considers the sequencing of products in mixed model assembly lines under Just-In-Time (JIT) systems. Under JIT systems, the most important goal for the sequencing problem is to keep a constant rate of usage every part used by the systems. The sequencing problem is solved using Genetic Algorithm Genetic Algorithm is a heuristic method which can provide a near optimal solution in real time. The performance of proposed technique is compared with existing heuristic methods in terms of solution quality. Various examples are presented and experimental results are reported to demonstrate the efficiency of the technique.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2011.05a
• /
• pp.115-116
• /
• 2011

This study aimed at establishing the fundamental data needed to evaluate the applicability and practicability in using a bamboo activated carbon as a construction material. The experiment on the flow of mortars mixed with a bamboo activated carbon before the hardening was carried out for the evaluation of basic properties. The compressive and bending strength of mortar mixed with bamboo activated carbon after the hardening was measured. the thermal conduction rate and density were also measured. An comparative analysis on mortars mixed with pine charcoals was conducted to compare it with exiting materials.

• Journal of Environmental Science International
• /
• v.23 no.12
• /
• pp.1971-1976
• /
• 2014

In this study, the photocatalytic decomposition characteristics of single toluene, toluene mixed with benzene, toluene mixed with acetone, and toluene mixed methyl mercaptan (MM) by UV reactor installed with $TiO_2$-coated perforated plate were studied. The photocatalytic decomposition rate of single toluene, toluene mixed with benzene, toluene mixed with acetone, and toluene mixed with MM fitted well on Langmuir-Hinshelwood (L-H) kinetics equation. The maximum elimination capacity was obtained to be $628g/m^3{\cdot}d$ for single toluene, $499g/m^3{\cdot}d$ for toluene mixed with benzene, $318g/m^3{\cdot}d$ for toluene mixed with acetone, and $513g/m^3{\cdot}d$ for toluene mixed with MM, respectively. The negative effect in photocatalytic decomposition of toluene are found to be in the order of acetone>benzene>MM.

• Journal of applied mathematics & informatics
• /
• v.29 no.5_6
• /
• pp.1067-1074
• /
• 2011

In this paper, a preconditioned mixed-type splitting iterative method for solving the linear systems Ax = b is presented, where A is a Z-matrix. Then we also obtain some results to show that the rate of convergence of our method is faster than that of the preconditioned AOR (PAOR) iterative method and preconditioned SOR (PSOR) iterative method. Finally, we give one numerical example to illustrate our results.

• Korean Journal of Mathematics
• /
• v.26 no.3
• /
• pp.467-481
• /
• 2018

In this paper we present a postprocessing scheme for the Raviart-Thomas mixed finite element approximation of the second order elliptic eigenvalue problem. This scheme is carried out by solving a primal source problem on a higher order space, and thereby can improve the convergence rate of the eigenfunction and eigenvalue approximations. It is also used to compute a posteriori error estimates which are asymptotically exact for the $L^2$ errors of the eigenfunctions. Some numerical results are provided to confirm the theoretical results.

• Journal of applied mathematics & informatics
• /
• v.15 no.1_2
• /
• pp.251-264
• /
• 2004

We introduce a semidiscrete mixed finite element approximation for the single-phase linear Stefan problem and show the unique existence of the approximation. And the optimal rate of convergence in $L^2$ and $H^1$ norms are derived.

• Textile Coloration and Finishing
• /
• v.2 no.1
• /
• pp.21-30
• /
• 1990

In order to obtain high dye uptake initially, polyethylene terephthalate (PET) filaments were dyed with C.I.Disperse Orange 3 and Red 1 in mixed solvents of tetrachloroethylene acidic solvent, ethyl alcohol and tetrachloroethylene basic solvent, DMF. The dyeing behavior in the mixed solvent of tetrachloroethylene and basic solvent, DMF, the initial uptake of disperse dyes increased rapidly. The shrinkage of PET increased when the solubility parameter values of PET fiber and mixed solvent approached graduately.

• Journal of the Korea Concrete Institute
• /
• v.17 no.4 s.88
• /
• pp.595-602
• /
• 2005

The purpose of this study is to utilize recycled concrete aggregates as permeable pavement materials. This study evaluates mechanical properties and durability of porous concrete depending on mixing rates of recycled aggregates and polyme. As a result, void ratio and permeability coefficient of porous concrete for pavement increased a little as mixing rate of recycled aggregates increased. Void ratio and permeability coefficient increased a lot as mixing rate of polymer increased. As polymer was mixed $20\%$, national regulation of permeable concrete for pavement($8\%$ and 0.01cm/sec) was met. Compressive strength and flexural strength decreased as mixing rate of recycled aggregates increased but they increased a lot as mixing rate of polymer increased. Even when recycled aggregates were mixed $75\%\;with\;10\%$ polymer mixed, national regulation of pavement concrete(18MPa and 4.5MPa) was met. In addition, regarding sliding resistance, BPN increased as mixing rate of recycled aggregates increased. But BPN decreased as polymer was mixed. Compared to crushed stone aggregates, abrasion resistance and freeze-thaw resistance decreased as mixing rate of recycled aggregates Increased. When polymer was mixed, abrasion resistance and freeze-thaw resistance improved remarkably. Compared to non-mixture, $10\%$ mixture of polymer improved abrasion resistance and freeze-thaw resistance about $8.6\%$ and 3.8times respectively.

• International Journal of Highway Engineering
• /
• v.9 no.4
• /
• pp.93-104
• /
• 2007

This study evaluates the mechanical properties of steel fiber reinforced porous concrete for pavement according to content of slag aggregate and fly ash to elicit the presentation of data and the way to enhance its function for the practical field application of porous concrete as a material of pavement. As a result, void ratio and permeability coefficient of porous concrete for pavement increased a little as mixing rate of slag aggregates increased. Void ratio and permeability coefficient increased a lot as mixing rate of fly ash decreased. As fly ash was mixed, national regulation of permeable concrete for pavement(8% and 0.1 cm/sec) was met. Compressive strength and flexural strength decreased as mixing rate of slag aggregates increased, but they increased a lot as mixing rate of fly ash increased. Even when slag aggregates were mixed 50% with 5% fly ash mixed, national regulation of pavement concrete(18MPa and 4.5MPa) was met. In addition, compared to non-mixture, flexural strength increased about 22.8% when 0.75vol.% of steel fiber was added. Regarding sliding resistance, BPN increased as mixing rate of slag aggregates increased. But BPN decreased as fly ash was mixed. Compared to crushed stone aggregates, abrasion resistance and fleers-thaw resistance decreased as mixing rate of slag aggregates increased. When fly ash was mixed, abrasion resistance and freeze-thaw resistance improved remarkably. Compared to non-mixture, 10% mixture of fly ash improved abrasion resistance and freeze-thaw resistance about 5.6% and 14.3 respectively.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.9 no.2
• /
• pp.104-111
• /
• 1997

The freezing phenomenon of saturated water with the supercooled region in a horizontal circular cylinder has been studied experimentally by using the holographic real time interferometry technique. From the experiments, it was found that there were three types of freezing patterns. The first is the annular ice layer growing from the cylinder surface at a high cooling rate; the next is the asymmetric ice layer at a moderate cooling rate; and the last is the instantaneous ice layer growth over the full region at lower cooling rate. As the water was coolde from room temperature to the subfreezing point passing through the density inversion point, the freezing pattern was largely affected by the inversion phenomenon, which had much effected the free convection and was susceptible to influences from the cooling rate. When the cooling rate is high, supercooling energy is released before the water is sufficientry mixed by free convection. On the other hand, when the cooling rate is low, there is much time for the water to be mixed by free convection. This seems to be the reason why the different ice layer growths occur.