• Analytical Science and Technology
• /
• v.34 no.1
• /
• pp.23-35
• /
• 2021

In order to measure the volatile organic compounds (VOCs) of a sample which is too large to use commercially available chamber, a stainless steel vacuum chamber (VC) (with an internal diameter of 205 mm and a height of 50 mm) was manufactured and the temperature of the chamber was controlled using an oven. After concentrating the volatiles of the sample in the chamber by helium gas, it was made possible to remove residual volatile substances present in the chamber under reduced pressure ((2 ± 1) × 10-2 mmHg). The chamber was connected to a purge & trap (P&T) using a 6 port valve to concentrate the VOCs, which were analyzed by gas chromatography-mass spectrometry (GC-MS) after thermal desorption (VC-P&T-GC-MS). Using toluene, the toluene recovery rate of this device was 85 ± 2 %, reproducibility was 5 ± 2 %, and the detection limit was 0.01 ng L-1. The method of removing VOCs remaining in the chamber with helium and the method of removing those with reduced pressure was compared using Korean drinking water regulation (KDWR) VOC Mix A (5 μL of 100 ㎍ mL-1) and butylated hydroxytoluene (BHT, 2 μL of 500 ㎍ mL-1). In case of using helium, which requires a large amount of gas and time, reduced pressure ((2 ± 1) × 10-2 mmHg) only during the GC-MS running time, could remove VOCs and BHT to less than 0.1 % of the original injection concentration. As a result of analyzing volatile substances using VC-P&T-GC-MS of six types of cell phone case, BHT was detected in four types and quantitatively analyzed. Maintaining the chamber at reduced pressure during the GC-MS analysis time eliminated memory effect and did not affect the next sample analysis. The volatile substances in a cell phone case were also analyzed by dynamic headspace (HT3) and GC-MS, and the results of the analysis were compared with those of VC-P&T-GC-MS. Considering the chamber volume and sample weight, the VC-P&T configuration was able to collect volatile substances more efficiently than the HT3. The VC-P&T-GC-MS system is believed to be useful for VOCs measurement of inhomogeneous large sample or devices used inside clean rooms.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.34 no.6
• /
• pp.348-354
• /
• 2020

Oryeong-san (ORS) is a traditional Korean herbal medicine widely used for renal associated diseases, composed of five medicine herbs; Atractylodes japonica Koidzumi, Cinnamomum cassia Presl, Polyporus umbellatus Fries, Poria cocos Wolf and Alisma orientale Juzepzuk. We studied to improve the convenience of intake and portability by developing modernized dosage forms, and examined the effect on anti-inflammation of ORS. In order to develop the tablet formulation of ORS (ORS-F), the tablets were evaluated on the basis of physical characteristics include diameter, thickness, weight variation, hardness, friability and disintegration. To analyze the marker components of ORS-F, eight index markers from five herbal medicines were chosen. And the method using high performance liquid chromatography (HPLC) with diode-array detector method was established for the simultaneous analysis. The biological activities were examined the effect of ORS-F on pro-inflammation mediated by LPS-stimulation. The production of nitric oxide (NO) and cytokines were determined by reacting cultured medium with griess reagent and enzyme-linked immunosorbent assay (ELISA). The expression of cyclooxygenase-2 (COX-2) and inducible NO synthase (iNOS) were investigated by Western blot and RT-PCR. The anti-oxidant activities of OJS-F increased markedly, in a dose-dependent manner. and, The total phenolic compound and flavonoids contents of OJS-F were 10.20±0.09 ㎍/㎎ and 12.86±0.86 ㎍/㎎. OJS-F which is LPS has diminished in the LPS-induced release of inflammatory mediators (NO, iNOS, COX2 and PGE2) and pro-inflammatory cytokines (TNF-α, IL-6 and IL-1β) from the RAW264.7 macrophages. Therefore, the developed formulation for tablet of ORS-F provide efficiency and usability, and indicated effect of anti-inflammation.

• Journal of the Korean Geotechnical Society
• /
• v.38 no.5
• /
• pp.47-59
• /
• 2022

A series of experiments were performed to investigate the design and application of a rubble-ground modification method with grout injection. A small-sized injection machine was designed, and the grouts with various mix proportions were injected into 25 mm aggregate using the designed small-sized injection machine. With the compressive strength of the grout ranging from 20 to 80 MPa, the uniaxial compressive strength of the grout-filling bodies with clean gravels was higher than 1/6th of the strength of grouts themselves. However, this fraction may reduce depending on the interface conditions. The erosion resistance of the hardened grout was evaluated, and it was determined that the grout with a strength greater than 15 MPa did not require erosion consideration. Moreover, a full-scale injection test was performed for 25 cm-sized rubbles in cages with a diameter greater than 1 m and a height of 1.2 m to evaluate the filling characteristics of the grout. Results from this test indicated that the grout flowability sensitively influenced the filling characteristics.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.1
• /
• pp.91-99
• /
• 2008

The method to prepare the large cemented sand specimen for calibration chamber test by air-pluviation is investigated in this study. The uniformity of cemented specimen is evaluated by performing the CPTs, DMTs, and bender element tests in the calibration chamber. The sand particles, pre-wetted with 0.5% water content, are mixed with gypsum to provide the homogeneous coating of gypsum particles on the grain surface. It was shown that the pre-wetting of particle surface is effective to minimize the potential for segregation between sands and gypsum during air-pluviation. It was observed that the extreme void ratios ($e_{max}\;and\;e_{mix}$) of the mixture of pre-wetted sand and gypsum powder increase at lower gypsum content while those of the mixture of dry sand and gypsum decrease with increasing gypsum content. It was also shown from the test results that large cemented specimens reconstituted in calibration chamber by rainer system are quite uniform in vertical and horizontal directions.

• Korea Science and Art Forum
• /
• v.23
• /
• pp.95-109
• /
• 2016

The background and objective of this study are as follows. Gwangheemun, one of the 4 small gates of Seoul Castle is a space to represent ordinary people and it is a valuable cultural heritage that shows the process of technical transition of fortification technology during Chosun Dynasty. It is a place that we can expect to play a role as a field where history and culture mix and communicate together. But currently, the environment and facilities around Gwangheemun have fallen behind and become old, so they need to be reorganized as their local feature is not shown distinctly. We need to vitalize the new traditional space that shows local feature. This study has drawn out the method, contents and the result of study like as follows. This study aims to establish an identity based on the historical and cultural backgrounds and suggest the contents to vitalize the space of Gwangheemun as a traditional cultural heritage. By this, this study aims to create a historical and cultural space where people can enjoy, eat and look around. Therefore, based on the historical and cultural feature, it gives an identity as moonlight street, and it has developed and suggested 5 contents to vitalize space: Gwangheemun maintenance, plan, castle restoration plan, village inside the castle, village outside the castle and fashion art street. Contents to vitalize space has a meaning as a specific developmen method of urban restoration, and we can expect to be used as a direction to develop the area to enhance the cultural quality of life of both inhabitants and visitors by forming the brand identity of surrounding area with traditional cultural heritage.

• Journal of Distribution Science
• /
• v.9 no.2
• /
• pp.49-59
• /
• 2011

A franchise can be said to be the main method of distribution and marketing. It appears to be the future of the retail industry and is one of the world's fastest growing businesses sectors, as many policy reports and research results have acknowledged. Korea's franchise industry began in the 1970s, spread out into many areas (including food services, retail, and the service industry), and has grown by over 10% each year ever since. The industry's influence on the national economy becomes ever greater. Although the size of the franchise industry is expected to grow as it spreads and as the government expands its support, it has not yet attracted much academic interest. Research has so far been very fragmented. The main interest has been the relationship and conflicts between the head offices and the affiliates. No study has yet occurred on whether the concepts of satisfaction and intent to conclude a contract directly affect the success or failure of the affiliates. Few studies have empirically inquired into the demographic characteristics and abilities of the affiliates that significantly affect their results. Domestic franchise industries must prepare to leap from quantitative to qualitative growth. Most important is the need for affiliate headquarters and affiliates to build confidence between them. A friendly and reliable relationship between affiliate headquarters and affiliates will eliminate distrust from the franchise and maintain a healthy franchise system. This study suggests that current and prospective heads of affiliation should concentrate not on attracting affiliates but on investment and techniques of affiliate support. They should work on the reinforcement of brand power, the appropriate affiliate business environment, systematic education/training, taking burdens off the affiliate business persons, consolidating the relationship with the affiliate business persons, marketing mix factors (e.g. products, price conditions, logistics and shipping services, promotion, supervising and supervisor, operation procedures/processes, and material evidence); these all greatly affect the success or failure of the affiliate business. Supporting the affiliates is an important factor that enhances their results and satisfaction and consequently increases the positive recommendations to others and the ratio of recurrent conclusions of contracts, which ultimately generate the growth of the franchises. In addition, it is suggested that prospective franchise founders should make every effort to choose a good head office since the characteristics of the head office greatly influence the success of the affiliates. This study is significant in that it grasps the characteristics of the head office of affiliation and of the affiliates that influence affiliate results in ways not yet academically attempted.

• Journal of the Korean Society of Radiology
• /
• v.15 no.2
• /
• pp.109-115
• /
• 2021

This study is a study on the difference in dose according to the presence or absence of gonadal shielding of scattered rays generated during chest computed tomography examination, and the scattered dose of the examination site was measured by placing the RadEye G-10 device in the center of the phantom. When the gonads are not shielded, the scattering lines of the whole, both sides, posterior and gonads are measured and Xenolite nolead Apron (0.35 mm PB), Xenolite nolead Apron (front 0.35 mm PB Mix back 0.25 mm PB, Skirt overlap), Half Apron After shielding with (0.5 mm PB), each scattered dose was measured. During chest computed tomography, the scattered dose of the test site was measured at 272 μSv, and when not shielded with Apron, the average total was 43 μSv, left 81 μSv, right part 82 μSv, posterior part 38.8 μSv, and Gonad part 16 μSv. Became. Xenolite nolead Apron shielded only the upper part and measured all 11.2 μSv, left part 43.1 μSv, right part 45.3 μSv, posterior part 12 μSv and Gonad part 5.2 μSv. Xenolite nolead Apron (Skirt overlap) covered the Pelvis area 360° and the dose was measured to be 5.6 μSv in the whole, 22.4 μSv in the left, 15.7 μSv in the right side, 6 μSv in the posterior part, and 3.2 μSv in the Gonad part. Xenolite nolead Apron (Skirt overlap) covered the Pelvis area 360° and the dose was measured to be 5.6 μSv in the whole, 22.4 μSv in the left, 15.7 μSv in the right side, 6 μSv in the posterior part, and 3.2 μSv in the Gonad part. When measuring only the upper part with Half Apron, the total measurement was 10.7 μSv, the left part 42.6 μSv, the right part 40.6 μSv, the posterior part 11.3 μSv, and the Gonad part 4.7 μSv. The method of 360° shielding of the pelvic area showed a dose reduction of more than 80%, and a dose reduction effect of more than 70% was shown when all shielding was performed. In all computerized tomography examinations, research to reduce the exposure dose and various shielding devices were used. It is believed that continuous research on the technique is needed.

• 한국사회정책
• /
• v.20 no.3
• /
• pp.77-115
• /
• 2013

The purpose of this study is to present empirical evidence for discussion of financing social welfare via estimating optimal tax burden in the main member countries of the OECD by using Hausman-Taylor method considering endogeneity of explanatory variables. Also, the author produced an international tax comparison index reflecting theoretical hypotheses on revenue-expenditure nexus within a model to compare real tax burden by countries and to examine feasibility of tax increase in Korea. As a result of the analysis, the higher the level of tax burden was, the higher the level of welfare expenditure was, indicating the connection between high burden and high welfare from the aspect of scale. The results also indicated that the subject countries recently entered into the state of low tax burden. Meanwhile, Korea had maintained low burden until the late 1990s but the tax burden soared up since the financial crisis related to the IMF. However, due to the impact of foreign economy and the tax reduction policy, it reentered into the low-burden state after 2009. On the other hand, the degree of social welfare expenditure's reducing tax burden has been gradually enhanced since the crisis. In this context, the current optimal tax burden ratio of Korea as of 2010 may be 25.8%~26.5% of GDP based on input of welfare expenditure variables, a percent that Korea was investigated to be a 'high tax burden-low ITC' country whose tax increase of 0.7~1.4%p may be feasible and that the success of tax system reform for tax increase might be higher probability when compare to others. However, measures of increasing social security contributions and consumption tax were analyzed to be improper from the aspect of managing finance when compared to increase in other tax items, considering the relatively higher ITC. Tax increase is not necessarily required though there may be room for tax increase; the optimal tax burden ratio can be understood as the level that may be achieved on average when compared to other nations, not as the "proper" level. Thus, discussion of tax increase should be accompanied with comprehensive understanding of models of economic developmental difference from nations and institutional & historical attributes included in specific tax mix.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.491-497
• /
• 2022

In this study, we tried to secure basic data to create an environment necessary for distance learning through a survey on professor demand. Among the 184 full-time faculty members of the university, 73 (39.89%) respondents in 2021 and 87 (47.28%) in 2022 were included. As a result of the research on professor demand, in the 2021 school year, 27 people (37%) were classified as LMS improvement items when checking attendance, 38 people (23.3%) were pin-mics as content development support items, and 26 people (35.6%), 33 people (45.2%) of GOM Mix and 25 people (34.2%) of the distance education support center wanted to learn video editing program as the item of video editing program they are currently using. In the 2022 school year, 27 people (31.03%) said mobile upgrade as an LMS improvement item, 52 people (59.8%) of pin-microphone as a content development support item, 33 people (37.9%), but currently using the content creation intention using a studio. As for the video editing program they are working on, 47 people (54%) of GOM Mix Pro and 23 people (26.4%) of the distance education support center want to learn content creation method. In addition, the intention to produce content using the studio for the 2021 and 2022 academic year and the desired educational topic of the distance education support center in the future appeared insignificant (p > 0.05). In this distance education support center, we are working to solve the class of LMS attendance, upgrade mobile, and plan to distribute pin microphones. We are planning to increase the usability of the studio and provide training on how to use video editing programs and how to create video content. In order for a smooth class to take place in a university distance class, the university authorities should seek ways to support the instructor so that he/she does not have difficulties in performing his/her role as a teaching designer, such as setting learning goals, organizing and organizing content, motivating learning, and establishing effective class participation plans. there is a need

• Environmental and Resource Economics Review
• /
• v.31 no.2
• /
• pp.165-204
• /
• 2022

This study organized data from 2000 to 2014 for 20 grid-connected countries in Europe and analyzed the determinants of carbon emissions through the panel GLS method considering the problem of heteroscedasticity and autocorrelation. At the same time, the effect of introducing ETS was considered by dividing the sample period as of 2005 when the European emission trading system was introduced. Carbon emissions from individual countries were used as dependent variables, and proportion of generation by each source, power self-sufficiency ratio of neighboring countries, power production from resource-holding countries, concentration of power sources, total energy consumption per capita in the industrial sector, tax of electricity, net electricity export per capita, and size of national territory per capita. According to the estimation results, the proportion of nuclear power and renewable energy generation, concentration of power sources, and size of the national territory area per capita had a negative (-) effect on carbon emissions both before and after 2005. On the other hand, the proportion of coal power generation, the power supply and demand rate of neighboring countries, the power production of resource-holding countries, and the total energy consumption per capita in the industrial sector were found to have a positive (+) effect on carbon emissions. In addition, the proportion of gas generation had a negative (-) effect on carbon emissions, and tax of electricity were found to have a positive (+) effect. However, all of these were only significant before 2005. It was found that net electricity export per capita had a negative (-) effect on carbon emissions only after 2005. The results of this study suggest macroscopic strategies to reduce carbon emissions to green growth, suggesting mid- to long-term power mix optimization measures considering the electricity trade market and their role.