• 한국경영과학회지
• /
• 제34권4호
• /
• pp.15-26
• /
• 2009

Bass diffusion model have played a central role in studying the diffusion of the new products since 1969, the year of publication of Bass model. Almost 750 publications based on the Bass diffusion model have explored extensions and applications. Extension models can be divided into two types. One is the model containing marketing-mix variables and the other is the model containing additional parameters. This paper presents another extension model of the latter type. Our model allows the time varying coefficients of innovation and imitation. Two pieces approximation of time varying coefficients is introduced and it's parameters are estimated based on NLS(Non-Linear Mean Square) method. Empirical studies are performed and the results show that our model is superior to the basic Bass model and the NUI(Non-Uniform Influence) model which is the well-known extension of the Bass model. The model developed in this paper is, also, transformed into the Bass model with the ready potential adopters in order to enhance the descriptive power.

• 한국IT서비스학회지
• /
• 제8권2호
• /
• pp.173-187
• /
• 2009

CASE tools are complex software products offering many different features. Systems professionals have evaluated various CASE products from a feature and attribute basis. Each product has a different mix of strengths and weaknesses as perceived by the end user. Specific CASE tools support different steps of the applications development process as well as varying methodologies. In this paper we develop a method for evaluating CASE tools. The model has an analytic hierarchy process for evaluating CASE tools in terms of functionality, management efficiency, and support ability of provider, and a data envelopment analysis for overall evaluation considering cost and AHP results. We applied the developed model to a real world case study.

• Archives of Pharmacal Research
• /
• 제20권1호
• /
• pp.68-71
• /
• 1997

Penicillin sensor was prepared by immobilizing penicillinase (Pcase) on $H^{+}$-selective carboxylated poly (vinyl chloride) (PVC-COOH) membrane or cellulose filter membrane. The immobilization techniques are as follows. Pcase was immobilized with GTH on $H^{+}$-selective PVC-COOH membrane or some amount of BSA was dropped on that membrane. Another method to make immobilization is to mix type I Pcase with GTH and drop on a cellulose filter membrane. According to immobilization techniques, there were some differences in response properties of enzyme electrodes, however, all electrodes responded to Pcase-resistant penicillin derivatives. Pcase immobilized on cellulose filter membrane with $H^{+}$-selective PVC membrane eletrode was more stable and more sensitive to penicillinase-resistant penicillin derivatives than any other immobilization techniques.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.81-85
• /
• 1998

In the present study, the design method of containment walls is proposed by utilizing an existing site. The selected remedy for the Source Area of Operable Unit 2 at Hill Air Force Base stipulated containment of the pure-phase trichloroethylene contamination. The in-place-mixed wall construction was selected because of the irregular topography, small area of the site, and the requirement to reach depths of greater than 90 feet below ground surface. Bench-scale compatibility studies were performed for the containment wall mix design on three commercial bentonite clays. The samples were subject to screening tests and long-term tests for evaluation of changed soil properties when exposed to the contaminated groundwater.

• 대한교통학회지
• /
• 제8권1호
• /
• pp.5-15
• /
• 1990

As a result of the lack of methodology for the determination of navigational channel capacity and the consequence lack of effective management of traffic, navigational channels are often grossly underutilized or highly congested. The traditional rule of first-come-first-served admission of vessels to channels is not efficient as it assumes equal time intervals between entrance of consecutive vessels. A new vessel traffic management system is developed in this research and methodologies to measure the improvement in the channel capacity are developed. Methodology to measure the channel performances for three queue disciplines are developed. The effects of changes in major factors on the channel capacity model such as channel length, fleet mix and arrival rate, as well as changes in strategy are analyzed. Under given channel conditions, best strategy are recommended. Also, a method for effective stochastic channel capacity simulation was developed. The results of analysis and as ertions are compared with the results of simulation runs to prove their applicability.

• 전자공학회논문지A
• /
• 제31A권1호
• /
• pp.61-64
• /
• 1994

The NMOSFET with gate length of 0.1$\mu$m is fabricated by mix-and-match method. In this device, the electron beam lithography is used to form the gate layer, while other layers are formed by the stepper. The gate oxide is 7nm thick, and the device structure is normal LDD structure. The saturation Gm for gate length of 0.1$\mu$m is 246mS/mm. The subthreshold slope is 180mV/decade for 0.1$\mu$m gate length, but the slope is 80mV/decade for 0.3$\mu$m gate length.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 추계 학술발표회 제17권2호
• /
• pp.347-350
• /
• 2005

The strength level for removal of lining concrete in tunnel is increased from 2.94MPa to 4.9MPa in 2004. This result in the increase of concrete curing time, and construction time would be delayed. In this study, in order to improve the efficiency of construction cycle and satisfy the strength criterion, a curing method is adopted, which is considering the hydration heat in the lining concrete member. As a result, it is shown that the concrete curing time for form removal is about 20hrs without the adjustment of concrete mix design. And construction cycle time is not changed compared to that before the change of strength criterion.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.109-112
• /
• 2006

Social and environmental pressures draw greater significance on the recycling of the waste. Particularly, waste concrete is particularly crucial among the construction wastes in terms of conservation of natural construction resources as well as disposal crisis. The technology to recycle the waste concrete has been improved. This study has various replacement levels of natural fine aggregate with recycled fine aggregate while coarse aggregate is completely replaced with the recycled coarse aggregate and herein fundamental properties investigated include compressive strength, shrinkage and dynamic modulus of elasticity. As a result, it is anticipated that the recycled aggregate concrete can be successfully applied to structural concrete members provided a proper recycling process, mix design and curing method are practiced.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.13-14
• /
• 2009

정하중뿐만 아니라 충격하중에 대해서도 높은 저항성능을 보이는 것으로 알려져 있는 분절 복합체를 이용, 이에 대한 정하중과 충격하중을 실험 및 해석이 수행되었다. 동시에 분절체의 접합을 위한 최적 모르타르 개발이 수행되었다. 연구결과 분절복합체의 충격저항성능은 계면간의 상호 거동과 분절체의 배열에 따른 거동을 하는 것을 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 봄 학술발표회 논문집(I)
• /
• pp.205-210
• /
• 1998

The strength and dimension of recent constructed subway box structures are increased considerably. These increases are resulting in much initial cracks by hydration heat and thermal stress. According to previous studies, decrease of cement amount by using superplasticizer and L/H value is the best way to eliminate hydration heat and stress. The analyses using finite element model were performed. By the result of analysis, the use of superplasticizer and the decrease of the change of longitudinal placing length are proved to be more effective for elimination thermal cracks. By ACI Code, for longitudinal placing length 25 m, the amount of wall temperature reinforcement is always lack despite of concrete mix proportion. With analytical result and the inducing crack joint, the in-site test were performed and the analytical results proved to be effective. However, the inducing crack joint is not effective if it is a small size.