• 한국식생활문화학회지
• /
• 제22권2호
• /
• pp.261-265
• /
• 2007

우리나라에 자생하는 엉겅퀴를 대상으로 식물부위, 건조방법에 따른 총플라보노이드와 apigenin 함량 분석 및 엉겅퀴차의 소비자 기호도 검사를 수행한 결과, 잎에서 추출된 총플라보노이드 함량이 가장 높았으며, 꽃 및 줄기의 순서로 나타났다. 건조 방법에 따른 총플라보노이드의 함량은 잎과 꽃에서는 유의적인 차이가 나타나지 않았으나, 줄기에서는 동결건조와 오븐건조가 자연건조보다 높게 나타났다. Apigenin함량도 잎에서 가장 많이 확인되었으며 꽃, 줄기의 순서로 나타났다. 건조방법에 따른 apigenin함량 변화는 엉겅퀴의 잎과 줄기에서는 나타나지 않았으나, 꽃에서는 동결건조와 자연건조보다 오븐건조에서 그 함량이 높게 나타났다. 소비자 기호도 검사에서는 엉겅퀴꽃잎혼합차의 선호도가 엉겅퀴잎차 보다 높았으며, 이러한 제품이 시판될 때의 구매의향도 엉겅퀴꽃잎혼합차가 엉겅퀴잎차보다 높게 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.290.1-290.1
• /
• 2016

Grapehen, a single atomic layer of graphite, has been in the spotlight and researched in vaious fields, because its fine mechanical, electrical properties, flexibility and transparence. Synthesis methods for large-area graphene such as chemical vaper deposition (CVD) and mechanical, chemical exfoliation have been reported. In particular, chemical exfoliation method receive attention due to low cost process. Chemical exfoliation method require reduction of graphene oxide in the process of exfoliation such as chemical reduction by strong reductant, thermal reduction on high temperature, and optical reduction via ultraviolet light exposure. Among these reduction methods, optical reduction is free from damage by strong reductant and high temperature. However, optical reduction is economically infeasible because the high cost of short-wavelength ultraviolet light sorce. In this paper, we make graphene-oxide and lanthanoid ion mixture aqueous solution which has highly optical absorbency in selective wevelength region. Sequentially, we synthesize reduced graphene oxide (RGO) using the solution and visible laser beam. Concretely, graphene oxide is made by modified hummer's method and mix with 1 ml each ultraviolet ray absorbent Gd3+ ion, Green laser absorbent Tb3+ ion, Red laser absorbent Eu3+ ion. After that, we revivify graphene oxide by laser exposure of 300 ~ 800 nm layser 1mW/cm2 +. We demonstrate reproducibility and repeatability of RGO through FT-IR, UV-VIS, Low temperature PL, SEM, XPS and electrical measurement.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2002년도 학술.기술논문발표회
• /
• pp.17-22
• /
• 2002

This Waterproofing Material which mainly consisted of 2 components of waste tire chip powder and waste glass powder. This Study is abut development of waterproofing Material, There is not tried in domestic. The most Motive of this Study wishes to recycle resources and get the economic performance for waterproofing Material The result of this Study is as followings. (1) Dense waterproofing floor is formed between waste tire chip by Coupling Agent(the most effective method to encourage adhesive strength and raise cohesion of material by combination.) (2) Expected to bring effect to shorten construction period at spot application potentially space-time in moisture aspect. Also, shortening effect of construction period and spot work are considered to be gone efficiently selecting pre-mix construction method. (3) This development Waterproofing material has elasticity that nature side compatibility of cement ingredient and plastic Emulsion have when utilize and constructs waite resources (being waste tire chip and waste glass powdered).

• 한국환경복원기술학회지
• /
• 제2권1호
• /
• pp.88-93
• /
• 1999

In modern period, the history of highway landscaping can be divided into three stages. The first stage from the late 1960s to the early 1970s : during this period revegetation operation started and landscape architecture was introduced. The second stage from the late 1970s to the early 1980s : during this period the definition of functional planting which had played the most important role in highway landscaping was established. Also, highway landscaping was influenced by Japan, and the revegetation of highway slopes were applied with Seedspray, Block-sodding methods, and so on. The third stage from late 1980s to the present : during this period eco-landscaping was introduced and began to mix with ecosystem techniques. The revegetation works of cutting-rock slopes have widely been developed. Many people think that landscaping is necessary for us, and that revegetation method is effective to conserve slope environment. Based on accumulated data we have to improve the function of landscaping and revegetation method, and also have to establish the method of landscaping harmonized with our own landscape.

• The Journal of Asian Finance, Economics and Business
• /
• 제6권4호
• /
• pp.261-270
• /
• 2019

The study examines the relationship between perceived mental benefits, online trust, and personal information disclosure when shopping online in Vietnam. The e-commerce market has been booming in Vietnam since 2015. The number of online transactions and e-commerce sites has increased steadily in recent years. However, the number of online sales in Vietnam is still not high, and consumers are still limited in buying from websites when they have to provide too much information during and after the shopping process. The mix-method is used to ensure the scientific nature of the study. Qualitative research method (phenomenological research) along with the quantitative research method (survey) are applied to meet the research objectives. The data in the study was collected through the group discussion with eight experts and the survey with 917 respondents. Data processing result via SmartPLS software indicate the positive relationships between the factors in the research. The perceived mental benefits have the most potent influence on the online trust of Vietnamese customers; at the same time, both the perceived mental benefits and online trust affect customers personal information disclosure in electronic commerce. Some managerial implications relating increasing the perceived mental benefits, and customers' online trust are proposed for online businesses.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계 학술발표회 논문집(II)
• /
• pp.201-204
• /
• 2006

It should be noted that the critical chloride threshold level is not considered to be a unique value for all conditions. This value is dependent on concrete mix proportions, cement type and constituents, presence of admixtures, environmental factors, reinforcement surface conditions, and other factors. In this study, the accelerated corrosion test for reinforcing steel was conducted by electrochemical and cyclic wet and dry seawater method, respectively and during the test, corrosion monitoring by half-cell potential method was carried out to detect the time to initiation of corrosion for individual test specimen. For this purpose, lollypop and right hexahedron test specimens were made for 31%, 42%, and 50% of W/C, respectively, and then the accelerated corrosion test for reinforcing steel was executed. It was observed from the test that the time to initiation of corrosion was found to be different with the water-cement ratio and accelerated corrosion test method, respectively and the critical chloride threshold values were found to range from 0.91 to $1.47kg/m^3$.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.1802-1808
• /
• 2008

Recent interest in the construction sector, rising about the environment and eco-friendly recycled material resources, and increase the development of method But despite these efforts, and the diverse functional and structural changes in the structure can not be an appropriate response to the functional waterproof structural changes in the structures and appropriate response Diversification does not waterproof and functional issues such as durability, and which are occurring due to the structure to secure stability and durability, never sees the conservative economic losses due to import constructability reinforcement situation. Therefore, this study applies to structure the existing waterproof method (hereinafter referred to as structures water-resistant methode), and to review recent issues of environmental pollution and resource waste, and taking on environmental issues, such as Revelation and functional Inorganic mixed in a way to leverage the manufacturing water-resistant material "Re Inorganic, functional and environmentally friendly high-viscosity mix asphalt waterproof rubber reinforcements, and taking conservative" for the characterization and performance assessment to the issues raised by the structure and whether the judge would respond.

• Advances in concrete construction
• /
• 제11권4호
• /
• pp.285-298
• /
• 2021

This study focused on experimental evaluation of mechanical properties of pervious concrete mixtures with the aim of achieving higher values of strength while considering the associated costs. The effectiveness of key parameters, including cement content, water to cement ratio (W/C), aggregate to cement ratio (A/C), and sand replacement was statistically analyzed using paired-samples t-test, Taguchi method and one-way ANOVA. Taguchi analysis determined that in general, the role of W/C was more significant in increasing strength, both compressive and flexural, than cement content and A/C. It was found that increase in replacing percent of coarse aggregate with sand could undermine specimens to percolate water, though one-way ANOVA analysis determined statistically significant increases in values of strength of mixtures. Cost analysis revealed that higher strengths did not necessarily correspond to higher costs; in addition, increasing the cement content was not an appropriate scenario to optimize both strength and cost. In order to obtain the optimal values, response surface method (RSM) was carried out. RSM optimization helped to find out that W/C of 0.40, A/C of 4.0, cement content of about 330 kg/m3 and replacing about 12% of coarse aggregate with sand could result in the best values for strength and cost while maintaining adequate permeability.

• 한국환경과학회지
• /
• 제33권2호
• /
• pp.179-185
• /
• 2024

This study aimed to evaluate the differences in canine preferences for pet food terrine according to the processing method. As companion dogs, three male Spitz canines (average age 12 years, average weight 7 kg) and three male Spitz mix canines (average age 12 years, average weight 5 kg) were used in Experiment 1, whereas five male (average age 10 years, average weight 9 kg) and five female Shetland Sheepdogs (Sheltie, average age 10 years, average weight 8 kg) were used in Experiment 2, to evaluate their preferences and intake types. In both experiments, all dog categories mostly preferred 'meat' when it came to their first choice of food consumed, followed by 'vegetables', 'mixed eating', and 'vegetable leftover' last. This confirms means that canines are carnivores, and over time, choosing 'vegetables' or 'vegetable leftovers' as a secondary or alternate food source can be considered a natural process. When provided various terrines, canines in both experiments first ingested 'cooked' rather than 'freeze-dried' duck, chicken, beef, and pork terrines when selecting food at the start of feeding. For both experiments, most of the intake types using duck, chicken, beef, and pork terrine showed a preference for 'after consuming cooked terrine first and then intake freeze-dried' item. In conclusion, the reason for preferring cooked terrine can be attributed to the difference in the preparation cooking method of freeze-dried cooked terrine.

• 복식문화연구
• /
• 제29권1호
• /
• pp.28-47
• /
• 2021

The purpose of this study is to provide basic data to assist students and industrial designers in fashion by examining the trend of designing women's wear with the SCAMPER method. In the research, the seven types of SCAMPER methods for fashion design were classified based on the previous studies. From 2010 S/S to 2020 S/S, data from 5,149 photographs were collected through overlapping checks and classified by SCAMPER method type. Data analysis was performed using SPSS 25.0 for frequency analysis. As a result, in the SCAMPER "combine" method, more than two items were combined, or structural details were combined with items. In the most applied "adapt" method was involved imitating similar images, or natural forms, or other objects. The "modify" method was applied by changing the shape of some details in basic fashion items. The "magnify" method was applied by enlarging, elongating, or elevating some details of fashion items. The "minify" method was applied by minimizing, shortening, or lowering some details of basic fashion. The method of "put to other use" was expressed throughout the clothing by using non-fabric or trimmings such as metal, beads, and strings. The "rearrange" method was applied by repositioning the top and bottom, front and back, or outside and inside in fashion items and in details. The "reverse" method was applied by reversing the style of fashion, mix-and-match fabric, or switching the gender of the fashion items.