음악은 수많은 악기가 내는 사운드로 구성되어 있다. 그 중에서도 사람의 목소리인 '보컬' 사운드는 그 어떤 악기보다도 가장 즉각적으로 잘 인지되는 파트이다. 곡에서 중요한 부분을 차지하는 보컬을 여러 사운드 속에서 완벽하게 믹싱하는 데에는 많은 요소들이 고려되어야 하고 또 다양한 단계들이 존재한다. 그 단계 중 EQ에 집중하여 연구하고자 한다. 따라서 본 논문에서는 EQ작업과 관련된 사항들에 대해 EQ의 개념 및 종류로 부터 시작해 보컬 레코딩 시 EQing방법, Subtractive EQ, Additive EQ 등에 관해 알아보도록 할 것이다. EQ는 사운드 믹싱 과정에서 특히나 보컬 사운드를 다루는데 있어서 가장 중요한 도구 중 하나로 손꼽힌다. 보컬 이큐잉은 보컬이 완벽히 트랙 믹스 안에 어우러지게 하기 위해 각 주파수 대역을 부스트 하고 또 컷팅하여 음색을 다듬는 과정이다. 프로페셔널한 보컬사운드를 얻기 위해서는 그 무엇보다도 자신이 스타일적으로 의도하는 사운드가 무엇인지 확실한 방향성을 가지고 가야하고 그를 위해 레퍼런스 트랙을 이용하는 것도 아주 효과적이다. EQing이외에도 컴프레션, 리버브, 코러스, 딜레이 등의 이펙터 작업과 백킹 보컬과 하모니의 조정 등의 다양한 복잡한 단계의 작업이 있고 그 또한 매우 중요한 작업들이다. 그러나 믹싱의 시작에 해당하는 작업인 EQing은 무엇보다도 그 중요도가 큰 관계로 위 사항들을 두루 고려하여 세밀한 작업을 하여야 할 것이다.
본 연구는 국내 문헌정보학 분야 연구자가 인용한 해외 학술지 논문의 OA 접근가능성을 살펴보고자 하였다. 이를 위해 정보관리학회지에 인용된 해외 학술지 논문 1,543편을 수집하였고 해외 학술지의 OA 정책과 OA 정책상 OA로 공개가 가능한 논문 현황을 조사하였다. 그리고 OA finder(Google Scholar, Unpaywall, OA Button)들을 활용하여 실제로 온라인에서 어느 정도까지 접근이 가능한지를 조사하였다. 조사결과, 해외 학술지들은 대부분 그린 OA 정책을 채택하고 있었다. 그리고 해외 학술지 논문의 95.4%에 해당하는 1,476편의 논문이 정책상 OA로 공개가 가능하였다. 이에 OA로 공개가 가능한 논문들에 대해 OA finder들을 활용하여 접근가능여부를 파악한 결과, Google Scholar가 68%로 가장 높은 OA 접근성을 보였고 Unpaywall과 OA Button은 각각 39%와 36%의 비슷한 OA 접근성을 보였다. 그리고 이들 OA finder들을 조합할 경우 최대 72%까지 OA 접근성이 상승하는 것을 확인하였다.
In order to measure the volatile organic compounds (VOCs) of a sample which is too large to use commercially available chamber, a stainless steel vacuum chamber (VC) (with an internal diameter of 205 mm and a height of 50 mm) was manufactured and the temperature of the chamber was controlled using an oven. After concentrating the volatiles of the sample in the chamber by helium gas, it was made possible to remove residual volatile substances present in the chamber under reduced pressure ((2 ± 1) × 10-2 mmHg). The chamber was connected to a purge & trap (P&T) using a 6 port valve to concentrate the VOCs, which were analyzed by gas chromatography-mass spectrometry (GC-MS) after thermal desorption (VC-P&T-GC-MS). Using toluene, the toluene recovery rate of this device was 85 ± 2 %, reproducibility was 5 ± 2 %, and the detection limit was 0.01 ng L-1. The method of removing VOCs remaining in the chamber with helium and the method of removing those with reduced pressure was compared using Korean drinking water regulation (KDWR) VOC Mix A (5 μL of 100 ㎍ mL-1) and butylated hydroxytoluene (BHT, 2 μL of 500 ㎍ mL-1). In case of using helium, which requires a large amount of gas and time, reduced pressure ((2 ± 1) × 10-2 mmHg) only during the GC-MS running time, could remove VOCs and BHT to less than 0.1 % of the original injection concentration. As a result of analyzing volatile substances using VC-P&T-GC-MS of six types of cell phone case, BHT was detected in four types and quantitatively analyzed. Maintaining the chamber at reduced pressure during the GC-MS analysis time eliminated memory effect and did not affect the next sample analysis. The volatile substances in a cell phone case were also analyzed by dynamic headspace (HT3) and GC-MS, and the results of the analysis were compared with those of VC-P&T-GC-MS. Considering the chamber volume and sample weight, the VC-P&T configuration was able to collect volatile substances more efficiently than the HT3. The VC-P&T-GC-MS system is believed to be useful for VOCs measurement of inhomogeneous large sample or devices used inside clean rooms.
본 연구에서는 건설공사시 시멘트 사용에 따른 탄소배출 저감과 천연모래 고갈에 따른 대응방안으로 산화그래핀 및 다공성 장석을 적용하였다. 산화그래핀은 부착특성을 증가시키기 위해 (3-aminopropyl)trimethoxysilane으로 기능화 시켰으며, 이를 적용하여 표준배합 모르타르 대비 시멘트 함량을 5% 감소시킨 배합조건으로 공시체를 제작하여 압축강도를 평가하였다. 다공성 장석과 기능화된 산화그래핀이 적용된 시편과 표준배합시편의 압축강도는 각각 26MPa, 28MPa로 큰 편차를 보이지 않았으며, 지반구조물에서 요구하는 시멘트 모르타르의 압축강도를 만족하는 것으로 평가되었다. 시멘트 함량감소에도 적정강도를 유지할 수 있는 원인으로는 다공성 장석에 대표적 포졸란 성분인 SiO2와 Al2O3가 다량으로 함유되어 수화과정에서 Ca(OH)2와의 반응을 증가시켰고, 나노크기의 그래핀 표면이 수화생성물이 활발히 반응할 수 있는 반응면으로 작용하였으며, Carboxyl 작용그룹의 강력한 공유결합 특성이 수화물의 결합강도를 증가시켰기 때문에 시멘트 함량을 감소시켰음에도 적정한 압축강도가 유지되었던 것으로 판단된다.
본 논문에서는 재난 환경과 같은 환경에서의 음성 처리를 위해 실제 드론 소음 데이터를 수집하여 오염 음성 데이터베이스를 구축하고 음성 향상 기법인 스펙트럼 차감법과 심층 신경망을 이용한 마스크 기반 음성 향상 기법을 적용하여 성능을 평가한다. 기존의 심층 신경망 기반의 음성 향상 모델인 VoiceFilter(VF)의 성능 향상을 위해 Self-Attention 연산을 적용하고 추정한 잡음 정보를 Attention 모델의 입력으로 이용한다. 기존 VF 모델 기법과 비교하여 Source to Distortion Ratio(SDR), Perceptual Evaluation of Speech Quality(PESQ), Short-Time Objective Intelligibility(STOI)에 대해 각각 3.77 %, 1.66 %, 0.32 % 향상된 결과를 나타낸다. 인터넷에서 수집한 오염 음성 데이터를 75 % 혼합하여 훈련한 경우, 실제 드론 소음만을 사용한 경우에 비해 상대적인 성능 하락률 평균이 SDR, PESQ, STOI에 대해 각각 3.18 %, 2.79 %, 0.96 %를 나타낸다. 이는 실제 데이터를 취득하기 어려운 환경에서 실제 데이터와 유사한 데이터를 수집하여 음성 향상을 위한 모델 훈련에 효과적으로 활용할 수 있음을 확인해준다.
1. Lwang은 해발 1,200m 정도의 산악지역으로 일교차가 크고 햇볕의 양이 많은 지역으로 토양산도는 차재배에 이상적인 pH(H2O)가 평균 5.60이다. 2. pH(KCL) 4.26으로 이상적이다. 그러나 두 pH 차이가 1.34으로 심한 양분 부족 현상을 보이며 토양 EC가 0.05 mS/cm로 심각한 토양 수탈현상을 보이고 있다. 3. 토양의 산화환원전위(ORP)는 393mV로 아주 이상적인 토양을 보이고 있다. 토양산도와 함께 산화환원전위(ORP)는 좋은 유기농 차를 만드는데 큰 역할을 하고 있다. 4. 차는 연중 양분(養分)을 흡수하고 있는데, 측정 결과는 전 항목에서 심한 양분의 부족현상을 보여 향후 유기물의 투입이 요구되고 있다.
Purpose - Recently, entrepreneurship education has been revitalized with interest in entrepreneurship. Entrepreneurship education is an educational service activity that is provided for entrepreneurship and individual start-up success within a certain period of time. According to previous studies on entrepreneurship and entrepreneurship, the satisfaction of entrepreneurship education affects entrepreneurship and as a result increases entrepreneurship. In recent years, the number of female entrepreneurs has also increased as the number of entrepreneurial issues has increased. Based on previous studies, this research proposed the theoretical framework about the structural relationships among mentoring quality (career development, psychological social, role modeling), education satisfaction, recommendation intention and entrepreneurial intention. This study is to find out the possibility of attempting to create a theoretical basis for entrepreneurial mentoring education in entrepreneurship education program. Research design, data, and methodology - In this model, mentoring quality consists of three sub-dimensions such as career development, psychological social, and role modeling. In order to test research model and hypotheses, the data were collected from 203 female college students who participated in entrepreneurial education. The data were analyzed using frequency analysis, confirmatory factor analysis, correlation analysis, and structural equational modeling with SPSS 24.0 and SmartPLS 3.0 statistical program. Result - The results of the study are as follows. First, role modeling has a positive effect on recommendation intention and entrepreneurial intention. Second, career development has a strong negative effect on the entrepreneurial intention. Third, career development and role modeling had a positive effect on educational satisfaction, and educational satisfaction had positive influence on recommendation intention and entrepreneurial intention. Conclusions - As women's social advancement becomes more active, start-up support programs including entrepreneurship mentoring are increasing. The results of this study suggest how to use the mentoring program mix and how to allocate the resources for the education program when the entrepreneurial education manager plans and executes the mentoring education program. For example, this study shows that career development and role modeling enhance educational satisfaction, and in turn increase recommendation intention and entrepreneurial intention. This means that entrepreneurship education should consist of contents that include career development functions such as sponsorship, guidance, protection, and provision of challenging work. In addition, the findings of this study indicate that mentors should perform the function of allowing the participants to have confidence and professional thinking ability at the time of start up based on their experiences.
해충의 저항성발달로 야기되는 문제를 해결하기 위한 정보를 제공함으로써 향후연구를 촉진시키고자 하였다. 농약사용이 지속되는 한 저항성 발달은 필연적이라는 생각으로, 저항성발달을 지연시키기 위해 재배자가 활용할 수 있는 약제성질에 근거를 둔 약종선택, 혼용, 교호, 모자이크 처리 등 약제살포법과, 천적과 양립할 수 있는 선택성 살충제와 저항성 천적의 이용을 중심으로 한 병해충 종합관리(IPM)에 대해 고찰하였다. 저항성관리에 약종의 성질을 이용할 경우 약종별로 작용점과 mode of action(작용방식)이 같거나 다를 수 있고, 2차 해충과 함께 살충제의 활성, 잔류기간, 약제 저항성 발달에 대한 취약성도 다르다. 약제는 섭식, locomotion(거동), 비행, 교미, 포식자 회피 등에도 영향을 미치므로 종합적으로 고려하여 역교차저항성을 나타내는 살충제의 사용이 바람직하다. 농약혼용은 실제 많이 이루어지고 있고 앞으로도 그러하겠지만, 진정한 의미에서 저항성 발달 지연을 위한 혼용, 교호, 모자이크 처리법은 대립유전자의 우성도, 교차저항성, 유입(immigration), fitness 불이익 등과 함께 살충제의 작용방식과 작용점들의 차이에서 구성약제가 매우 높은 비율로 충을 죽이는 부의 교차저항성을 가진 살충제들의 채택에 대하여 논의하였다. 저항성 관리에 약제혼용의 대표적인 사례 22가지와 교호처리 사례 27가지를 표로 제시하였다. 혼용처리의 잠재적 불이익은 생물적 방제의 와해, 이차해충의 저항성발달, 고도의 저항성 개체군 선발, 다양한 살충제에 대한 교차저항성 범위 확대를 내포하고 있다. 교호처리는 살포약량을 높이거나 낮추고, 다른 대사기구를 가진 살충제를 사용하는 것도 고려되었다. 모자이크 처리는 진딧물 같이 정주성 해충인 경우에 연관없는 살충제를 교호로 다른 구역에 처리하거나, 살충제 처리한 열(列)과 그렇지 않은 것을 혼합 배치하여 저항성 발달을 지연시키거나 피해를 감소시킬 수 있다. 해충의 저항성 진화 측면에서 볼 때, 기생자와 포식자의 저항성과 선택성은 농약처리를 요하는 세대 수를 감소시키고 농약으로부터 피난처의 상보적 역할을 수행할 수 있다. 작물별, 기주별, 기생자와 포식자에게 선택성을 보이는 약제를 별도의 표로 요약하여 제시하였다. 기생자의 생존력 향상을 위해 살충제의 선택성과 선택성에 영향을 주는 내 외적 요인에 대하여 검토하였다. 농약사용 하에서 기생자를 사용하기 위해 농약에 대해 저항성이거나 내성이 있는 기생자를 검정, 채집 혹은 선발하는 것을 논의하였다. 포식자에 대한 선택독성에 영향을 미치는 요인들로 농약의 선택성, 선택성의 포장적용과 그에 미치는 요인, 포식자와 기주의 균형, 선택성을 도외시한 방제법의 문제점, 천적과 농약의 양립성 등에 대하여 논의하였다.
한국퍼지및지능시스템학회 1993년도 Fifth International Fuzzy Systems Association World Congress 93
/
pp.975-976
/
1993
This talk presents the overview of the author's research and development activities on fuzzy inference hardware. We involved it with two distinct approaches. The first approach is to use application specific integrated circuits (ASIC) technology. The fuzzy inference method is directly implemented in silicon. The second approach, which is in its preliminary stage, is to use more conventional microprocessor architecture. Here, we use a quantitative technique used by designer of reduced instruction set computer (RISC) to modify an architecture of a microprocessor. In the ASIC approach, we implemented the most widely used fuzzy inference mechanism directly on silicon. The mechanism is beaded on a max-min compositional rule of inference, and Mandami's method of fuzzy implication. The two VLSI fuzzy inference chips are designed, fabricated, and fully tested. Both used a full-custom CMOS technology. The second and more claborate chip was designed at the University of North Carolina(U C) in cooperation with MCNC. Both VLSI chips had muliple datapaths for rule digital fuzzy inference chips had multiple datapaths for rule evaluation, and they executed multiple fuzzy if-then rules in parallel. The AT & T chip is the first digital fuzzy inference chip in the world. It ran with a 20 MHz clock cycle and achieved an approximately 80.000 Fuzzy Logical inferences Per Second (FLIPS). It stored and executed 16 fuzzy if-then rules. Since it was designed as a proof of concept prototype chip, it had minimal amount of peripheral logic for system integration. UNC/MCNC chip consists of 688,131 transistors of which 476,160 are used for RAM memory. It ran with a 10 MHz clock cycle. The chip has a 3-staged pipeline and initiates a computation of new inference every 64 cycle. This chip achieved an approximately 160,000 FLIPS. The new architecture have the following important improvements from the AT & T chip: Programmable rule set memory (RAM). On-chip fuzzification operation by a table lookup method. On-chip defuzzification operation by a centroid method. Reconfigurable architecture for processing two rule formats. RAM/datapath redundancy for higher yield It can store and execute 51 if-then rule of the following format: IF A and B and C and D Then Do E, and Then Do F. With this format, the chip takes four inputs and produces two outputs. By software reconfiguration, it can store and execute 102 if-then rules of the following simpler format using the same datapath: IF A and B Then Do E. With this format the chip takes two inputs and produces one outputs. We have built two VME-bus board systems based on this chip for Oak Ridge National Laboratory (ORNL). The board is now installed in a robot at ORNL. Researchers uses this board for experiment in autonomous robot navigation. The Fuzzy Logic system board places the Fuzzy chip into a VMEbus environment. High level C language functions hide the operational details of the board from the applications programme . The programmer treats rule memories and fuzzification function memories as local structures passed as parameters to the C functions. ASIC fuzzy inference hardware is extremely fast, but they are limited in generality. Many aspects of the design are limited or fixed. We have proposed to designing a are limited or fixed. We have proposed to designing a fuzzy information processor as an application specific processor using a quantitative approach. The quantitative approach was developed by RISC designers. In effect, we are interested in evaluating the effectiveness of a specialized RISC processor for fuzzy information processing. As the first step, we measured the possible speed-up of a fuzzy inference program based on if-then rules by an introduction of specialized instructions, i.e., min and max instructions. The minimum and maximum operations are heavily used in fuzzy logic applications as fuzzy intersection and union. We performed measurements using a MIPS R3000 as a base micropro essor. The initial result is encouraging. We can achieve as high as a 2.5 increase in inference speed if the R3000 had min and max instructions. Also, they are useful for speeding up other fuzzy operations such as bounded product and bounded sum. The embedded processor's main task is to control some device or process. It usually runs a single or a embedded processer to create an embedded processor for fuzzy control is very effective. Table I shows the measured speed of the inference by a MIPS R3000 microprocessor, a fictitious MIPS R3000 microprocessor with min and max instructions, and a UNC/MCNC ASIC fuzzy inference chip. The software that used on microprocessors is a simulator of the ASIC chip. The first row is the computation time in seconds of 6000 inferences using 51 rules where each fuzzy set is represented by an array of 64 elements. The second row is the time required to perform a single inference. The last row is the fuzzy logical inferences per second (FLIPS) measured for ach device. There is a large gap in run time between the ASIC and software approaches even if we resort to a specialized fuzzy microprocessor. As for design time and cost, these two approaches represent two extremes. An ASIC approach is extremely expensive. It is, therefore, an important research topic to design a specialized computing architecture for fuzzy applications that falls between these two extremes both in run time and design time/cost. TABLEI INFERENCE TIME BY 51 RULES {{{{Time }}{{MIPS R3000 }}{{ASIC }}{{Regular }}{{With min/mix }}{{6000 inference 1 inference FLIPS }}{{125s 20.8ms 48 }}{{49s 8.2ms 122 }}{{0.0038s 6.4㎲ 156,250 }} }}
최근 필자가 견직물방추 가공하기 위해 개발한 acryl 합성수지를 합성섬유와 견직물가공된 것이 정전기발생에 어떠한 영향을 미치는가를 알기 위해 실행했다. 본 실험조건은 다음과 같다. (A) 사용가공처리제는 0.5% acryl polymer 525였다(자가제). (B) 각 직물에 대한 정전기 대전압은 K.S. 규격마찰 검사(KS K 0555) 방식에 따라 했다. (C) 마찰대상 직물로서는 K.S. 표준규격 KS K 0905 cotton, nylon, polyester와 공시직물로 했다. (D) 시료로서 silk, nylon, polyester 및 acryl 직물을 상기 합성수지 가공한 것과 안한 것을 구분해서 정전기 대전압을 조사했다. (E) 가공한 것과 가공하지 않은 시료별로 K.S. 표준규격(KS K 0465) 방식에 의해 세탁했다. 이와 같은 조사로 인하여 여러 가지 흥미있는 결과를 얻었는데 그 결과는 다음과 같다. 1. polyster를 제외하고는 silk, bylon, acryl 직물의 가공직물의 대전압이 가공하지 않은 것의 대전압보다 높았다(Table 5참조). 2. 가공한 polyester 직물의 K.S. polyester에 대한 대전압이 현저하게 감소하였다. 3. 견직물의 대전성은 흠이 없는데도 불구하고 높게 나왔는데 그 이유로서는 견직물의 결점이 마찰에 약하다는 성질과 마찰에 의한 K.S. 표준검사규격이 마찰에 강한 합성섬유를 대상으로 되어서 견직물에는 부적합한데 있다. 4. 동질섬유직물간의 마찰로 인한 대전압이 이질섬유직물간이 대전압보다 작게 나왔다. 5. 정전기 대전압은 세탁반복에 따라 증가하였다. 6. 많은 조사 결과가 Contact Electrification Series 원칙에 준하고 있는 사실, 즉 series상 피차 멀리 배치될수록 마찰대전압이 높아지고 있었다(Fig. 6 참조). 7. 이러한 조사 결과는 정전기 발생에 관하는 한 혼방사작업에 문제점으로 될 것이다. 8. 또한 견직물 가공에 임해서도 정전기 대전압이 가공으로 인해 증가할 것이라는 문제를 잊어서는 안 된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.