• International Journal of Highway Engineering
• /
• v.19 no.2
• /
• pp.55-65
• /
• 2017

PURPOSES : This study aimed to analyze the experimental and numerical behavior of warm mix asphalt pavement prepared using steel slag and RAP and to conduct economic analysis of pavement construction. METHODS : For developing high performance asphalt pavement, we performed three evaluations: fundamental analysis, experimental testing, and 3D finite element analysis. In particular, 3D finite element analysis was conducted on several pavement structures by adopting the results of experimental tests. RESULTS : Through the various evaluations, it was established that steel slag was effective for use as asphalt mixture aggregate. Moreover, asphalt mixture constituting steel slag and RAP demonstrated higher performance behavior compared with conventionally used asphalt mixture. Furthermore, based on the 3D FE modeling, we established that the developed asphalt pavement constituting steel slag and RAP can be utilized for thin layer pavement with comparable performance behavior. CONCLUSIONS :Warm mix asphalt pavement prepared using steel slag and RAP is more competitive and economic compared to hot-mix asphalt pavement. Moreover, it can be applied for preparing thin layer asphalt pavements with reasonable performance. The developed warm mix asphalt pavement prepared using steel slag and RAP can be an alternative pavement type with competitive performance based on the reasonable economic benefit it provides.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.275-280
• /
• 2001

Recently, self-compacting concrete is applied in order to achieve workability improvement and rationalization in construction. But self-compacting concrete using viscosity agent has a difficulty in practical use because viscosity agent is invested small quantity and by man-power. Therefore in this paper we have been focused on the development and practical use of self-compacting concrete by hydraulic composition containing the segregation-reducing agent. According to mix variable, we find out right quantity of water, binder and rate of admixture replacement, and also we find out the optimum mix proportion. In the result, self-compacting concrete by hydraulic composition containing the segregation reducing agent gave satisfaction with standard and its demand will increase in the future.

• Journal of radiological science and technology
• /
• v.8 no.2
• /
• pp.73-76
• /
• 1985

For a study on aluminium equivalent towards tissue equivalent material, authors made use of the Mix-DP as a tissue equivalent material. The aim of this study is to furnish the information on radiotherapy and x-ray diagnosis.

• International Journal of Concrete Structures and Materials
• /
• v.6 no.4
• /
• pp.239-246
• /
• 2012

Pervious concrete is a tailored-property concrete with high water permeability which allow the passage of water to flow through easily through the existing interconnected large pore structure. This paper reports the results of an experimental investigation into the development of pervious concrete with reduced cement content and recycled concrete aggregate for sustainable permeable pavement construction. High fineness ground granulated blast furnace slag was used to replace up to 70 % cement by weight. The properties of the pervious concrete were evaluated by determining the compressive strength at 7 and 28 days, void content and water permeability under falling head. The compressive strength of pervious concrete increased with a reduction in the maximum aggregate size from 20 to 13 mm. The relationship between 28-day compressive strength and porosity for pervious concrete was adversely affected by the use of recycled concrete aggregate instead of natural aggregate. However, the binder materials type, age, aggregate size and test specimen shape had marginal effect on the strength-porosity relationship. The results also showed that the water permeability of pervious concrete is primarily influenced by the porosity and not affected by the use of recycled concrete aggregate in place of natural aggregate. The empirical inter-relationships developed among porosity, compressive strength and water permeability could be used in the mix design of pervious concrete with either natural or recycled concrete aggregates to meet the specification requirements of compressive strength and water permeability.

• International Journal of Highway Engineering
• /
• v.17 no.2
• /
• pp.63-70
• /
• 2015

PURPOSES: As a part of our research into repair techniques for roads that have collapsed as a result of a natural disaster, this study set out to find the optimum mix proportion for gravels to be used to restore a damaged area. METHODS: This study considered flow and strength-development characteristics. The experimental variables were the W/C ratio, the usage of the admixture, the types of cement, and the quantity of fine aggregate over three different experimental stages. The compressive strength was measured at 12 hours, one day, three days, and seven days. RESULTS : The flow varied with the amount of fine aggregate and the use of a high-range water-reducing (HRWR) admixture. The compressive strength also varied with respect to the type of cement and the W/C ratios. The strength satisfied the expected requirement of 21 MPa after one day, provided the mix proportion was appropriate. CONCLUSIONS: A gravel-filling high-flow cement-based mortar exhibited strength and consistency with a W/C ratio in the range of 0.40 to 0.45, assuming the use of HRWR at 0.5 to 0.7% and a fine aggregate/cement ratio of 1.0 to 1.5.

• Korean Journal of Construction Engineering and Management
• /
• v.7 no.2 s.30
• /
• pp.62-70
• /
• 2006

As buildings are changing variously from the side of use, efficiency and size, the construction qualities are more importantly recognized. Supervision system was enacted in the Residential Building Law in 1990 and responsibility supervision system in the Construction Engineering Management Law in 1994, respectively. However, recently revised supervision system in 2003 has some limitations: the present problems of appointing supervisor, disposing the supervisors, supervisor's works. Therefore, the aim of this study is to improve the present supervision system for mix-use residential building. By implementing the proposed revised supervision system, it will be able to expect quality improvement, confidence of the owner and the user, development of construction technology, and increase international competitiveness of supervision company.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.549-554
• /
• 2002

In Powder System, SCC demands high dosage of superplasticizer and a lage amout of powder for suitable fluidity and viscosity. Okamura's method of most representative mixing design method in SCC of Powder-System is unfavorable economically because of using a large amount of powder. In addition, many ready-mixed concrete plants do not use his mix design method and procedure due to complexity for practical application. Therefore, Nan Su proposed more simple mix design method than Okamura's. It had an advantage in simplicity in practical application and required a smaller amount of powders compared with Okamura's method. This paper proposed an optimal mixture proportion of SCC with consideration of Nan Su's method. The new and modified mix design method required a smaller amount of powder than that of Nan Su's. To check the properties of SCC, considered with the requirements specified by the Japanese Society of Civil Engineering.(JSCE)

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.11a
• /
• pp.132-133
• /
• 2015

In this research by examining the influence that low quality aggregate has on the strength of concrete through testing, the lowering of strength according to use of low quality coarse aggregate was reviewed. The results showed that when using low quality coarse aggregate, due to the quality of aggregate a high volume of units was required, and this caused the compression strength to be lowered. In conclusion it was confirmed that if the low quality aggregate was used as is without mix correction this would lead to faulty construction and if the aggregate was corrected to about 60 kg/m3 mix correction, this would lead to an economically infeasible concrete mix.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.05a
• /
• pp.73-78
• /
• 2002

This study examines self-compacting of concrete using Ground Calcium Carbonate(GCC) gathering in limestone mine of Banyans district in order to make self-compacting concrete in the range of design strength 300kgf/cm$^2$ and the optimal mix proportion of self-compacting concrete that can use in field structure. The result shows that the optimal GCC replacement ratio is 45$\pm$5% in the normal strength of design strength 300kgf/cm$^2$ and that the volume ratio of the optimal fine aggregate used as the way satisfying both viscosity and compacting ability without separating materials is 46%. The optimal volume ratio of the coarse aggregate considering the economical aspect of concrete is 50%. It is desirable that the optimal mix proportion satisfying self-compacting for replacement of GCC is decided through mix design according to each replacement ratio.

• Proceedings of the KIEE Conference
• /
• 2007.11b
• /
• pp.23-25
• /
• 2007

In this paper an estimation method is proposed to find reasonable load factor of the power system based on the conventional generation mix concept. To find the factor investment costs and operation costs are considered in the estimation. To use feasible results both supply side and demand side of views should be considered. But as a first step of this study only the generation mix is considered in this study.