• 한국지반공학회논문집
• /
• 제16권1호
• /
• pp.211-220
• /
• 2000

과압밀 점토층에 설치된 4개의 직경 305 mm 현장타설 말뚝(1개의 일반 현장타설 말뚝과 불포화 점토층에서 발생하는 주면 마찰력을 경감시키기 위해 분리형 튜브를 사용한 3개의 분리형 현장타설 말뚝)의 거동을 분석 비교하기 위한 실험적 연구를 수행하였다. 흡수력 측정을 하기 위해 말뚝 주변에 지반흡수력 측정 장치를 설치하였고 지표면 표고 변화도 측정하였다. 지표면 표고는 최고 40 mm까지 팽창하였고, 일반 말뚝은 5 mm, 분리형 말뚝은 1.5 mm 미만의 말뚝 두부 수직인발변위가 관측되었다. 분리형 말뚝에서 관측된 주면마찰력은 일반형 말뚝에 비해 미소하여 분리형 튜브를 사용한 분리형 현장타설 말뚝이 주위 지반의 팽창 수축에 의해 말뚝에 발생하는 주면 마찰력을 경감시키는데 매우 효과적이었다.

• Journal of Ecology and Environment
• /
• 제38권3호
• /
• pp.375-381
• /
• 2015

We investigated the influence of summer rainfall on Pectinatella magnifica colonies in lotic ecosystems. Of the examined substrate materials, branches and aquatic macrophytes supported more colonies of P. magnifica than that by stones or artificial materials. The influence of rainfall on P. magnifica colonies differed in accordance with the type of substrate material at each study site. In the Geum River, little difference was noted in the number of P. magnifica colonies on branches before ($mean{\pm}SE$, $24{\pm}7.3$ individuals) and after rainfall ($20{\pm}8.4$ ind.); other substrate types supported fewer colonies of P. magnifica after rainfall. In contrast, in the Miryang River, rainfall had minimal effect on the number of P. magnifica colonies supported by macrophytes ($13{\pm}3.8$ and $12{\pm}4.3$ ind., respectively). Artificial material was more abundant in the Banbyeon Stream where it was able to support more colonies of P. magnifica. We found that the structure of different substrates sustains P. magnifica following rainfall. In the Miryang River, free-floating and submerged plants with a relatively heterogeneous substrate surface were the dominant macrophytes, whereas in the Geum River, simple macrophytes (i.e., emergent plants) were dominant. Therefore, we conclude that the substrate type on which P. magnifica grows plays an important role in resisting physical disturbances such as rainfall.

• Journal of Periodontal and Implant Science
• /
• 제25권2호
• /
• pp.192-209
• /
• 1995

The purpose of this study was to evaluate drug-loaded biodegradable membranes for guided tissue regeneration(GTR). The membranes were made by coating mesh of polyglycolic acid(PGA) with polylactic acid(PLA) containing 10% flurbiprofen or tetracycline. The thickness of membrane was $150{\pm}30{\mu}m$, and the pore size of surface was about $8{\mu}m$ in diameter. The release of drugs from the membrane was measured in vitro. Cytotoxity test for the membrane was performed by gingival fibroblast cell culture, and the tissue response was observed after implant of membrane into the dorsal skin of the rat for 8 wks. Ability to guided tissue regeneration of membranes were tested by measuring new bone in the calvarial defects(5mm in diameter) of the rat for 5 weeks. The amount of flurbiprofen and tetracycline released from membrane were about 30-60% during 7 days. Minimal cytotoxity was observed in the membrane except 20% drug containing membrane. In histologic finding of rat dorsal skin, many inflammatory cells were observed around e-PTFE, polyglactin 910 and PLAPGA membrane after 1 or 2 weeks. PLA-PGA membrane was perforated by connective tissue after 4 or 6 weeks, and divided as a segment at 8 weeks. In bone regeneration guiding potential test, tetracycline loaded membrane was most effective (p

• 한국진공학회지
• /
• 제6권3호
• /
• pp.287-292
• /
• 1997

본 실험은 고밀도 플라즈마원인 inductively coupled plasma(ICP)를 이용하여 실리카 도파로의 코아를 형성하고자 하였다. $CF_4/CHF_3$유량비, bias power 및 source power 등의 변화에 따른 산화막의 식각 특성 즉 식각 속도, 식각 단면 및 식각된 표면의 거칠기 등의 변화를 검토하였다. 또한 single Langmuir probe 및 optical emission spectroscopy(OES)를 이용하여, 식각 변수에 따른 ICP의 플라즈마 특성을 관찰하였다. 이상의 결과를 토대로, $SiO_2-P_2O_5$로 구성된 실리카 도파로의 코아(core)층을 형성하였고, 이때 최적화된 식각 조건 에서 식각 속도는 380nm/min이고, 마스크 층으로 사용된 Al(Si 1%)와 산화막과의 식각 선 택비는 30:1이상이였다. 형성된 실리카 도파로를 scanning electron microscopy(SEM)으로 관찰한 결과, 코아층의 식각 단면이 수직하고 패턴 선폭의 손실이 거의 없음을 확인하였다.

• 한국세라믹학회지
• /
• 제56권4호
• /
• pp.365-373
• /
• 2019

Pond ash is a mixture of mostly coarser fly ash and bottom ash. The recycling rate of pond ash is low because pond ash is mixed with seawater and deposited in ponds. The pond ash is also subjected to natural weathering over a period of time. In this study, we investigated whether pond ash can be used as a raw material of geopolymers, without any purification process or through a minimal purification process. In addition, we investigated whether synthetic basalt made by adding foaming agent to geopolymer or casting it into a mold can show the surface of the natural basalt as it is. The highest 7-day compressive strength in geopolymers from pond ash without purification process was 26 MPa. The highest 7-day compressive strength in geopolymers from pond ash with impurities removed through dry sieve analysis was found to improve to 80 MPa. On the other hand, synthetic basalt made with geopolymer was shown to be more advantageous aesthetically when produced by casting it in a silicone mold rather than by adding a foaming agent. Non-purified pond ash can be made into geopolymers having low strength. Pond ash purified by sieving can, without use of an aggregate, be made into geopolymer having high-strength. Also, it is possible to produce synthetic basalt with the same appearance as natural basalt and sufficient strength for commercialization. This process will contribute to the mass consumption and recycling of pond ash.

• Journal of Periodontal and Implant Science
• /
• 제30권2호
• /
• pp.429-442
• /
• 2000

Based on current evidence in the literature, it is known that endotoxin is a weakly adherent surface phenomenon and that power-driven instruments can be used to accomplish definitive root detoxification and maximal wound healing without overinstrumentation of root and without extensive cementum removal. And one of the newly developed curette tips used with low power of piezoelectric ultrasonic scaler, is effective to remove calculus and not to remove the excessive cementum. The purpose of this study is therefore, to assess the influence of ultrasonic power and various working parameters on root substitute removal when instrumentation is performed with the curette tip on piezoelectric ultrasonic scaler. This study assessed defect depth, width and area resulting from instrumentation using a piezoelectric ultrasonic scaler with a curette type tip in vitro to acrylic resin block as a root substitute. The working parameters was standardized by the sledge device which controls lateral force(0.5 N, 1 N, 2 N) and instrumentation time(5 sec, 10 sec, 20 sec) and power setting was adjusted 0,2,4,8 in P mode. Power setting had the greatest influence on defect depth compared to lateral force and instrumentation time(standardized regression parameter estimates${\pm}$standard error, $0.37{\pm}0.02$, $0.19{\pm}0.02$, $0.07{\pm}0.02$). The effects on defect area also greatest for power setting($0.57{\pm}0.03$) compared to lateral force and instrumentation time($0.33{\pm}0.03$, $0.12{\pm}0.03$). The effect of the power setting on the defect width($0.15{\pm}0.01$) is not so great as defect depth or defect area compared to lateral force($0.12{\pm}0.01$) and effect of instrumentation time is minimal($0.02{\pm}0.01$). It could be concluded that the power setting has the greatest influence on the defect depth and area in curette type tip with low power of piezoelectric ultrasonic device. Many parameters can be adjusted in various situation in clinical use of piezoelectric ultrasonic scaler but the power setting is the first parameter to be adjusted.

• 품질경영학회지
• /
• 제48권2호
• /
• pp.269-282
• /
• 2020

Purpose: The practical design for experiments with mixtures of q components is consisted in the four types of design points, vertex, center of edge, axial, and center points in a (q-1)-dimensional simplex space. We propose a sequential method for the successful construction of the design space in Quality by Design (QbD) by allowing the different number of replicates at the four types of design points in the practical design when the quadratic canonical polynomial model is assumed. Methods: To compare the mixture designs efficiency, fraction of design space (FDS) plot is used. We search for the practical mixture designs whose the minimal half-width of the tolerance interval per a standard deviation, which is denoted as d₂, is less than 4.5 at 0.8 fraction of the design space. They are found by adding the different number of replicates at the four types of the design points in the practical design. Results: The practical efficient mixture designs for the number of components between three and five are listed. The sequential method to establish a design space is illustrated with the two examples based on the simulated data. Conclusion: The designs with the center of edge points replications are more efficient than those with the vertex points replication. We propose the sample size of at least 23 for three components, 28 for four components, and 33 for the five components based on the list of efficient mixture designs.

• 한국도로학회논문집
• /
• 제14권3호
• /
• pp.69-76
• /
• 2012

최근 국내 석산에서의 골재공급이 부족해지면서, 성토재 등의 저급재료로 재활용 되던 폐 콘크리트 순환골재의 용도를 점차 구조용 콘크리트 및 도로 포장재와 같은 고급재료로 재활용하기 위한 노력이 계속되고 있다. 이러한 노력의 일환으로 정부는 2009년 순환골재 품질기준을 제정하였으며, 순환골재가 기존보다 고급재료의 용도로 활용될 수 있는 제도적 기반을 마련하였으나, 현재까지 빈배합 콘크리트 기층용으로서의 순환골재의 활용은 매우 낮은 형편이다. 본 연구는 순환골재 품질기준에 규정되어 있는 빈배합 콘크리트용 순환골재의 이물질과 관련된 품질기준의 적정성을 일련의 실험을 통하여 평가하였다. 연구결과, 빈배합 콘크리트 기층용 순환골재 내의 폐 아스콘 골재는 강도에 악영향을 초래하는 반면, 아스콘의 특성으로 인하여 순환골재의 주요한 품질기준인 비중을 높이고, 흡수율 및 마모율을 오히려 낮추는 결과를 초래하여, 전체적인 순환골재의 품질을 평가하는데 큰 방해요소로 작용하였다. 따라서 이물질 함유량 기준 중, 폐 아스콘 함유량 기준은 개선의 여지가 있는 것으로 조사되어, 그 대안을 제시하였다.

• The Plant Pathology Journal
• /
• 제30권2호
• /
• pp.125-135
• /
• 2014

A population model of bacterial spot caused by Xanthomonas campestris pv. vesicatoria on hot pepper was developed to predict the primary disease infection date. The model estimated the pathogen population on the surface and within the leaf of the host based on the wetness period and temperature. For successful infection, at least 5,000 cells/ml of the bacterial population were required. Also, wind and rain were necessary according to regression analyses of the monitored data. Bacterial spot on the model is initiated when the pathogen population exceeds $10^{15}cells/g$ within the leaf. The developed model was validated using 94 assessed samples from 2000 to 2007 obtained from monitored fields. Based on the validation study, the predicted initial infection dates varied based on the year rather than the location. Differences in initial infection dates between the model predictions and the monitored data in the field were minimal. For example, predicted infection dates for 7 locations were within the same month as the actual infection dates, 11 locations were within 1 month of the actual infection, and only 3 locations were more than 2 months apart from the actual infection. The predicted infection dates were mapped from 2009 to 2012; 2011 was the most severe year. Although the model was not sensitive enough to predict disease severity of less than 0.1% in the field, our model predicted bacterial spot severity of 1% or more. Therefore, this model can be applied in the field to determine when bacterial spot control is required.

• 한국식품위생안전성학회지
• /
• 제23권4호
• /
• pp.309-313
• /
• 2008

청동합금인 우리 전통 식기 놋그릇 유기 소재의 항미생물 특성을 연구하기 위해 주요한 식중독 세균인 Salmonella spp., E. coli O157, E. sakazakii, B. cereus의 배양액을 유기, 구리, 주석, 스테인레스 스틸 쿠폰에 노출 건조 후 생균정도를 분석하였다. 이들 금속표면에서의 살균력 측정결과 Gram(-) 세균인 S. Typhimurium, E. coli와 E. sakazakii는 구리가 가장 높았고 유기, 주석표면, 스테인레스 스틸 금속표면 순으로 항균성이 높은 것으로 나타났다. 그러나 Gram(+)인 B. cereus의 살균효과는 어느 금속표면에서도 살균효과가 거의 나타나지 않았다. S. Typhimurium, E. sakazakii의 구리이온($Cu^{+2}$ 최소생육저해 농도는 25 ppm이었지만 B. cereus의 경우는 50 ppm으로 높은 것으로 나타났다. 따라서 구리와는 다르게 강한 경도를 갖고 있는 유기 소재를 식품제조 환경에 적용시킬 경우 Salmonella spp.를 포함한 주요한 Gram(-) 세균의 교차오염을 효과적으로 저감화 할 수 있을 것으로 사료된다.