• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.8
• /
• pp.834-839
• /
• 2012

Recently, mechanical components with miniaturized size, complex shape and fine surface are on demand from industries such as mobile electronics, medical devices and defense. The size of them is smaller than several millimeters, the shape has micro-holes, curve, or multi-step and the surface is mirror-like. This features are not able to be machined with the conventional machining, therefore electro-discharge machining (EDM), cutting, and laser machining have been applied. If the technologies are assisted by vibration, high aspect ratio and good surface are to be achieved. In this paper, prior and current researches of vibration-assisted machining are reviewed. Machining mechanisms with vibration-assisting are explained, their effects are shown, and vibrating apparatuses are discussed. Especially, comparison between with and without vibration assisting is presented. This review shows the vibration-assisted machining is effectively fabricate the components with small and complicated shape and fine surface finish.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.397-400
• /
• 2005

In this paper, folded PIFA is proposed by using folding the end point of PIFA for the automobile DMB antenna. By turning down the end point on the opposite side of shortstrip, resonance frequency is presented at not $\lambda$/4 but $\lambda$/10. So the folded PIFA has size reduction effect approximately 60 % as compared to the conventional PIFA. Also by using the parasitic patch, folded PIFA provides wide band performance. As a result, the designed antenna can be in the application of Digital Multimedia Broadcasting(180 $\sim$ 210 MHz) antenna for the automobile.

• Atmosphere
• /
• v.20 no.4
• /
• pp.519-530
• /
• 2010

In this paper we review current research on Atmospheric Brown Clouds (ABCs) with lightweight Unmanned Aerial Vehicles (UAVs) and miniaturized instruments. The UAV technology for in-situ measurements, including aerosol concentration, aerosol size distribution, aerosol absorption, cloud drop size distribution, solar radiation fluxes (visible and broadband), and spectral radiative fluxes, is a leading-edge technology for cost-effective atmospheric sounding, which can fill the gap between the ground measurement and satellite observation. The first experimental observation with UAVs in Korea, Cheju ABC Plume Monsoon Experiment (CAPMEX), conducted during summer 2008 revealed that the Beijing plumes exerted a strong positive influence on the net warming and fossil-fuel-dominated black-carbon plumes were approximately 100% more efficient warming agents than biomass-burning-dominated plumes. Long-term sustainable routine UAV measurements will eventually provide truly three-dimensional data of ABCs, which is necessary for the better understanding of their climate impacts and for the improvement of numerical models for air pollution, weather forecast and climate change.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.06a
• /
• pp.572-575
• /
• 2007

In this paper, we proposed a internal antenna for Quad band for GSM/DCS/USPCS/WCDMA Handset. Antenna Structure is designed to PIFA type. Antenna planed two independence patterns to reduce the size for efficiency and used shoting pin and inverse seven_type slit. Also they miniaturized the antenna construction electronic length for duty. furthermore, they designed and producted the antena height for 5w and ground term for 40*80mm. It is because they have wondered the thickness of terminal. used of for reduce size efficiently. The radiation pattern characteristic of antenna is compared and analyzed E-plane and H-plane at 920MHz, 1800MHz.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.254-262
• /
• 2009

This paper presents a novel simple filter design method based on a parallel short-ended coupled-line structure with capacitive loading for size reduction and ultra-broad rejection of spurious passbands. In addition, the introduction of a cross-coupling capacitor into the miniaturized coupled-line can create a transmission zero at the second harmonic frequency for better frequency selectivity and attenuation level. The aperture compensation technique is also applied to achieve a strong coupling in the coupled-line section. The influence of using the connecting transmission line to cascade two identical one-stage filters is studied for the first time. Specifically, such a two-stage bandpass filter operating at 2.3 GHz with a fractional bandwidth of 10% was designed and realized with low-temperature co-fired ceramic technology for application in base stations that need high power handling capability. It achieved attenuation in excess of -40 dB up to $4f_0$ and low insertion loss of -1.2 dB with the size of 10 mm ${\times}$ 7 mm ${\times}$ 2.2 mm. The measured and simulated results showed good agreement.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.1166-1171
• /
• 2008

Despite of the increasing number of the application of drilled shaft piles in construction site, most studies on pile capacity have been focused on the side shear resistance. But it is common that the drilled shaft is socketed on the rock so as to use its bearing resistance. The prediction of the end movement and characteristics of the bearing capacity of the pile is great important as well. Therefore, a series of scaled model tests were carried out in order to study the characteristics of the bearing capacity on rock mass. The material of the test block was cement mortar which was mixed with sand, cement and water, and the size of a test block size was $240{\times}240{\times}240mm$. The axial load was applied by a miniaturized pile of 45mm in diameter and flat jacks and steel plate were used for confinement to simulate the real underground loading conditions. The relation of load-displacement was measured in various different conditions of rock mass such as strength, discontinuity of the rock mass and in-situ stress, so q-w curves of the end of the pile were presented for each condition.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.9
• /
• pp.1030-1036
• /
• 2010

This paper proposes a simulation design for feeding probe with the CMM(Cylindrical Magneto Material) structure for broad bandwidth of a dipole type antenna. In order to ensure low frequency bandwidth, the magnetic material with high relative permeability was considered in design calculation. It was confirmed that the broad bandwidth was independent on the relative permeability value and depended on the control of distance($r_m$) between magnetic material and feeding probe, and of magnetic material thickness($t_m$). Furthermore, an antenna size with the CMM was miniaturized about 18 % comparison with its size without the CMM.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.12
• /
• pp.1706-1711
• /
• 2013

This paper presents the filter of a resonator comprising a shorted open gap ring(SOGR) and interdigital lines. The proposed filter has the ultra wideband characteristic operating from 3 GHz to 10.5 GHz. In order to achieve the remarkable improvement in the size-reduction of the overall filter structure, only one cell of the SOGR with the inter-digital lines is adopted. It is shown that this filter has the size of $18mm{\times}15mm$ using a metamaterial, the fractional bandwidth over 100%, the insertion loss much less than 1dB, an acceptable return loss performance in the results.

• Korean Journal of Computational Design and Engineering
• /
• v.4 no.4
• /
• pp.318-326
• /
• 1999

Recently, electronic systems including computers have been rapidly shrinking in size while at the same time the complexity and the capability of these systems continue to grow/sup [1]/. Thus, system volumes have decreased as system power has increased, resulting in dramatic increases in system heat density. The high temperature of the computer system is considered as the major reason for low performance and shortening life of the product. It is necessary to solve this problem due to the heat density increased and to develop the design skill of the computer cabinet according to miniaturization. M4500 desk-top computer was selected for analyzing the thermal management inside cabinet. The cabinet volume, the configuration of the heating devices, the size and location of air ventilation, and the fan selection have been investigated as the important parameters to find out an optimal cabinet design. The objectives of this project were to analyze which design parameters would affect cooling performance by thermal strategy, to design an optimal model, and to measure the temperatures of the main parts to confirm the effect of the thermal design. The temperatures of each part of the optimal model were compared with those of the existing model. As a result. the volume of this miniaturized model was about 16% smaller than that of M4500 without any change in operating performance.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1864-1869
• /
• 2003

A novel piezoelectric micropump using active check valves in place of conventional passive check valves in inlet and outlet has been proposed and investigated. It actively controls open/close motion of check valves using piezoelectric actuator for expansion/contraction of pump chamber. In this paper, bi-directional flow characteristics and load characteristics are experimentally investigated using an adequate timing control for valve closing motion with a prototype micropump fabricated with the effective size of $17{\times}8{\times}11mm^{3}$. From the experimental results, it is ascertained that optimal values of phase shift against voltage to drive pump chamber for realization of a miniaturized but powerful micropump, are $15^{\circ}$ in inlet check valve and $195^{\circ}$ in outlet. Based on the obtained results, a sheet-type active shuttle valve that has a unified valve-body for inlet and outlet check valves is proposed. A micropump with the effective size of $10{\times}10{\times}10mm^{3}$ is fabricated and basic characteristics are experimentally investigated.