• Title/Summary/Keyword: Miniature

Search Result 813, Processing Time 0.028 seconds

Hematology and Serum Chemistry Values of Growing Miniature Pigs (성장 미니돼지의 혈액 및 혈청화학 성분의 연구)

  • Jung, Joo-Hyun;Chang, Jin-Hwa;Kim, Hak-Sang;Yoon, Jung-Hee;Choi, Min-Cheol
    • Journal of Life Science
    • /
    • v.18 no.8
    • /
    • pp.1169-1172
    • /
    • 2008
  • The purpose of this study was to establish blood reference values for miniature pigs from various growth ages before pre-puberty. 12 miniature pigs from two swine farms were sampled by jugular venipuncture. Routine hematological and biochemical determinations were performed using whole blood and serum. For the variables examined in each age group the means and the standard deviations were calculated. In hematological values, there are significant changes (p<0.05) in RBC, hematocrit and platelet values in each group. In RBC and hematocrit values, 4-week group shows the lowest level, whereas in platelet values, 4-week group shows the highest level. In biochemical values, there are significant chnges (p<0.05) in glucose and GGT in each group, and in other biochemical values there are no significant changes during growing periods. The values presented here may be useful for knowing the normal values for miniature pigs and also screening the normal pigs in the early days of their life and during the developemental stages.

Development of Neuromuscular Stimulus System using Wearable Ultra-miniature Lighting Modules and its Verification of Clinical Effectiveness (의복형 초소형 발광모듈을 이용한 신경근육 자극 시스템 개발 및 임상적 효과 검증)

  • Park, Se-Hyeong;Lee, Jong-Shill;Kim, In-Young;Kim, Sun-I.
    • Journal of Biomedical Engineering Research
    • /
    • v.30 no.1
    • /
    • pp.23-33
    • /
    • 2009
  • It can be used easily to reduce rehabilitation and treatment time if diagnostic and therapeutic devices are attached to cloth or body. Therefore we developed neuromuscular wearable ultra-miniature lighting modules which can improve the neuromuscular function and verified its clinical effectiveness. The system is based on the ultra-miniature lighting treatment module and there are two types of systems. One of them is designed as an attached type and the other type is combined with clothing. The wearable ultra-miniature lighting module is composed of controller (battery, MCU, bidirectional transmitter and receiver), cable, treatment medium generating device and other peripheral devices. To verify the clinical effectiveness of this device, we observed the difference of the strength of a muscle before and after 650nm and 25mW laser irradiation on the reflex point for 1 to 4 seconds. Among 48 patients having the degenerative osteoarthritis, the muscle strength before and after irradiation of laser was $21.8{\pm}7.99$ and $27.3{\pm}8.43$. According to the result, the muscle strength after treatment was significantly increased (p<0.01). To whom having difficulty in visiting to OPD(Out-Patient Department), doctors medically examine the patients and find the therapeutic point, attachment of this wearable ultra-miniature lighting module can function as self treatment (treating instrument) and treatment assist at home. If doctor can remotely control the patient and take part in treatment, the therapeutic device could contribute to prevention and care device.

Evaluation of computed tomographic and radiographic myelography in normal miniature pigs

  • Choi, Mihyun;Lee, Hyeyeon;Kim, Mieun;Kim, Junyoung;Lee, Namsoon;Chang, Jinhwa;Jung, Joohyun;Choi, Mincheol
    • Korean Journal of Veterinary Research
    • /
    • v.50 no.1
    • /
    • pp.37-42
    • /
    • 2010
  • Evaluation of the myelography was studied in miniature pigs. Radiographs and computed tomographic (CT) images of the whole spine were obtained at clinically healthy twelve miniature pigs of 4 (8.7-10 kg) and 12 (26-31 kg) months. The assessments of the spinal cord were made in accordance with the Pavlov's method and compared area ratio [at spinal cord (SC), vertebral canal (VC) and vertebral body (VB)]. The Pavlov's ratio in the cervical spine was significant larger than that of thoracolumbar in radiographic myelography. On CT myelography, the area of the spinal cord had a significant difference between the cervical and thoracolumbar spine. Among the cervical spine, the ratios of spinal cord and vertebral body (SC : VB), vertebral canal and vertebral body (VC : VB) were minimum at the level of 4th cervical spine in both ages, while maximum at the level of 6th cervical spine in both months. In case of lumbar spine, the ratios of spinal cord and vertebral body (SC : VB) were the largest at the level of 4th lumbar spine in 4 months and at the level of 3rd lumbar spine in 12 months. In addition, the ratio of spinal cord and vertebral body (SC : VB) of the cervical spinal cord was significant lower at 4 months but the lumbar spinal cord showed lower pattern at 12 months old miniature pigs.

Feasibility study of insertable miniature x-ray source for dental imaging (치과 영상용 삽입형 초소형 X선 튜브의 가능성 연구)

  • Cho, Sung-Ho;Kim, So-Yeong;An, So-Hyun;Lim, Soo-Mee;Lee, Re-Na
    • Journal of the Korean Society of Radiology
    • /
    • v.6 no.1
    • /
    • pp.39-45
    • /
    • 2012
  • Conventional periphery radiography system has a various problem such as patient dose and the pain of X-ray examination. In this paper, to solve these problems, we suggested insertional miniature x-ray system and we verified the feasibility of this system. First, we performed the Geant4 x-ray simulation to design x-ray collimator and filter to use miniature x-ray tube and we decided optimized thickness of filter and collimator. Also, we measured x-ray spectrum using CdTe detector and PX4 module to verify simulation results. Also, we acquired teeth image of fabricated phantom using conventional dental x-ray and prosed miniature x-ray system. As a results, our system has good image quality as compared to those of conventional systems. Our evaluation of the proposed system indicates that it can be potentially very useful for dental imaging.

Effect of TES Extender on Sperm Characteristics and Viability of Frozen Semen in Miniature Pig (TES 보존액이 미니돼지 동결 융해 정자의 생존성 및 성상에 미치는 영향)

  • Kim, Sang-Hwan;Kang, Hyun-Ah;Lee, Myeong-Seop;Seo, Kang-Suk;Yoon, Jong-Taek
    • Journal of Embryo Transfer
    • /
    • v.27 no.1
    • /
    • pp.45-50
    • /
    • 2012
  • The objective of this study is to estimate the effect of adding TES to LEY and FGE freezing extender for the sperm viability, acrosomal morphology and DNA fragmentation from miniature pig sperm, we evaluated sperm characteristics in TFGE, TLE and LEY with various thawing condition ($37^{\circ}C$ for 20 sec, 45 sec and $75^{\circ}C$ for 5 sec, respectively), and in different concentration of glycerol at 1%, 1.5%, 3%. The sperm viability and normal acrosome intact(NAI) in TFGE (Viability : $60.3{\pm}2.4$, NAI : $58.6{\pm}2.2%$), TLE ($61.3{\pm}2.4$, $62.2{\pm}2.2%$) extender significantly(p<0.05) increased than that in LEY ($50.2{\pm}2.4$, $54.5{\pm}2.2%$) extender thawed at $75^{\circ}C$ for 5 sec. According to the results from glycerol concentration, the viability and NAI of miniature pig sperm in 1.5% glycerol TLE ($66.1{\pm}3.2$, $66.2{\pm}1.0%$) was highest among the experimental groups. In accordance with this, DNA fragmentation rates was the lowest in TLE ($43.3{\pm}0.5%$) while that in LEY ($63.5{\pm}2.3%$) is the highest. Therefore, these results suggest that TLE extender method for freezing- thawing of miniature pig sperm increased the viability after thawing.

Nondestructive Analysis on Miniature Pagoda of Sarira Reliquary (Treasure No. 259-2) from Sujong-sa Temple (수종사(水鍾寺) 석조(石造) 부도내(浮屠內) 금동제구층탑(金銅製九層塔)(보물(寶物) 제(第)259-2호(號))의 비파괴(非破壞) 분석조사(分析調査))

  • Kwon, Hyuknam;Yu, Heisun;Kang, Hyungtae
    • Conservation Science in Museum
    • /
    • v.4
    • /
    • pp.57-61
    • /
    • 2003
  • From the stupa of Sujongsa-Temple, located in Yangpyeong, Gyeonggi-do province, was excavated a celadon jar with lid, a gilt-bronze nine-storied miniature pagoda and a silver-plate hexagonal miniature shrine, etc. Among them, the gilt-bronze miniature pagoda has been known as a gilt-bronze product since most of its surface has copper tint and the base part has bronze corrosion. Its formal title registered on the Cultural Properties Administration also begins with "a gilt-bronze". However, it was supposed to be a gold product in many aspects: the color and status of the surface, degree of the bronze corrosion creation and the metal thread joining the wind bell. So the necessity to prove its material by a scientific analysis was raised. We examined it with nondestructive method. The results were traces of open-working on many parts of the surface, but no traces of gilding. Moreover, as we perform an XRF analysis, the main component were gold and silver(16%) and some impurities such as copper and iron were found. Therefore, it could be inferred that this miniature pagoda is a gold product.

Diagnostic Imaging for Lung Lobe Torsion in a Miniature Pinscher (Miniature Pinscher 견에서 발생한 폐염전의 진단영상 1례)

  • Choi, Ji-Hye;Kim, Hyun-Wook;Jang, Jae-Young;Ban, Hyun-Jung;Kim, Hye-Jin;Kim, Jin-Kyung;Kim, Jun-Young;Yoon, Jung-Hee
    • Journal of Veterinary Clinics
    • /
    • v.24 no.3
    • /
    • pp.410-413
    • /
    • 2007
  • A four-year old, female Miniature Pinscher was presented with intermittent coughing. Thoracic radiography and ultrasonography revealed the consolidation of left cranial lung lobe surrounded by pleural effusion and the extraction of left lung lobe was performed through thoracotomy. This case has the clinical significance because lung lobe torsion was diagnosed by non-cardiac ultrasonographic examination, therefore surgical correction was performed without delay and led good outcome. Moreover, the authors believe the present case was the first report on lung lobe torsion in Miniature Pinscher dog.

Improvement of fatigue resistance of the miniature gear by controlling holding time of temperature in the hot powder extrusion process (분말 압출 공정에서 온도 유지시간 제어를 통한 미세기어의 내피로성 향상 연구)

  • Kim, J.W.;Lee, K.H.;Hwang, D.W.;Kim, B.M.
    • Proceedings of the Korean Society for Technology of Plasticity Conference
    • /
    • 2009.10a
    • /
    • pp.449-452
    • /
    • 2009
  • This paper was designed to fabricate the miniature spur gear with pitch circle of 1.8 by hot extrusion process of mechanically alloyed Zn-22wt%Al powder at various temperature. The mechanical alloying was preformed for ball milled times of 8h, 16h and 32h by the planetary ball milling. Mechanically alloyed powders were compacted cylindrical performs. Extrusions of the miniature spur gear using the alloyed powder were carried out at different extrusion temperatures. The extruded spur gear was sintered for 2h at $350^{\circ}C$ in argon atmosphere. The friction between the die and the powdered billet and the internally different density due to complex product shape cause the internal crack. To overcome the mentioned problems, high dimensional accuracy at cross section of the spur gear and uniform Vickers hardness could be obtained by graphite lubricant and controlling holding time.

  • PDF

A study on the Frequency Synthesizer for Dual-Band Repeater (이중대역 중계기를 위한 주파수합성기의 설계에 관한 연구)

  • Kim, Jin-Sub;Byeon, Sang-Gi;Kang, Yong-Cheol
    • Proceedings of the IEEK Conference
    • /
    • 2005.11a
    • /
    • pp.277-280
    • /
    • 2005
  • In this paper, we propose a frequency synthesizer for dualband repeater. The dual-band RF technology for applications to the wireless repeater for CDMA and WCDMA mobile communications has been developed in this paper. The dualband PLL module consisted of dual-band VCO and one PLL IC has been developed. The main technological efforts for the dual-band PLL module is to suppress the intermodulation distortion by applying the miniature ceramic filter using the slow wave characteristics. The dual-band miniature RF module including dual-band PLL module and one MCU controller is very attractive for applications to the miniature dual-band RF mobile repeaters.

  • PDF

Development of Novel Dental Chews for Dogs Considering Breed Variations in Anatomical Features of Dentition

  • Noh, Hyun-woo;Kang, Seon-mi;Seo, Kangmoon
    • Journal of Veterinary Clinics
    • /
    • v.34 no.6
    • /
    • pp.429-433
    • /
    • 2017
  • The purpose of this study was to find anatomical variation of each small breed dog's dentition for designing more effective dental chews. Small breed dogs were volunteered for dental impressions with dental stone and alginate under tiletamine-zolazepam, tramadol, and medetomidine intravenous anesthesia. Twenty-two criteria were measured to compare dental impressions. Twenty-five dogs (9 Malteses, 8 Miniature Poodles, and 8 Shih-Tzus) were recruited. Statistically, Shih-Tzus had smaller teeth and shorter interdental spaces than those of Maltese and Miniature Poodles. Grossly, the distance between upper teeth and lower teeth was wider in Shih-Tzus. Shih-Tzu had different dental anatomy in comparative to Miniature Poodle and Maltese. It was recommended to design the dental chew considering these differences.