• 한국정보통신학회논문지
• /
• 제22권5호
• /
• pp.740-746
• /
• 2018

지금까지 컴퓨터악기 제작시도는 크게 샘플링 (sampling)방식과 피지컬 모델링(physical modeling)의 2가지 방식이 주를 이루었다. 샘플링 방식은 샘플링 과정에서 배음의 많은 부분이 삭제되기 때문에 현의 배음을 강조하는 익사이터(exciter) 효과가 미미하다. 하지만 피지컬 모델링 방식에서는 많은 배음을 지닌 음을 만들어 낼 수 있으며 이 배음 중 특별한 주파수대의 배음을 강조함으로써 더욱 실음에 가까운 음색을 만들어 낼 수 있다. 여기서는 현의 피지컬 모델링에 있어서 현의 특정 주파수대의 배음을 강조하는 익사이터를 구현함에 있어 화이트노이즈(백색소음)을 이용하는 방법을 제안한다. 그리고 가야금 소리의 엔벨로프(envelope)와 스펙트럼 비교를 통해 익사이터를 갖는 피지컬모델링 방식이 샘플링 방식 및 기존의 피지컬 방식보다 실제 가야금 소리에 더 적합함을 확인하였다.

• International Journal of Aeronautical and Space Sciences
• /
• 제11권4호
• /
• pp.338-344
• /
• 2010

This paper discusses the development of the control system of a mini quadrotor in Konkuk University for indoor applications. The attitude control system consists of a stability augmentation system, which acts as the inner loop control, and a modern control approach based on modeling will be implemented as the outer loop. The inner loop control was experimentally satisfied by a proportional-derivative controller; this was used to support the flight test in order to validate the modeling. This paper introduces the mathematical model for the simulation and design of the optimal control on the outer loop control. To perform the experimental tests, basic electronic hardware was developed using simple configurations; a microcontroller used as the embedded controller, a low-cost 100 Hz inertial sensors used for the inertial sensing, infra-red sensors were employed for horizontal ranging, an ultrasonic sensor was used for ground ranging and a high performance propeller system built on an quadrotor airframe was also employed. The results acquired from this compilation of hardware produced an automatic hovering ability of the system with ground control system support for the monitoring and fail-safe system.

• 패션비즈니스
• /
• 제26권6호
• /
• pp.32-46
• /
• 2022

The purpose of this study is to explore a three-dimensional (3D) simulation of skirt shape concepts by manipulating circumferences and lengths via parametric design in the fashion design concept stage. This study also intends to propose a modeling method that can judge and transform the shape through immediate parameter adjustment. We looked at cases that utilized parametric design in other fields of fashion design, reviewed and analyzed the variables used in each study, and constructed parameters suitable to implement skirt fashion design. The traditional design elements required for skirt design, namely waist and hip circumferences, were set as variables in this study. The parametric design was developed to generate ideas of two skirt silhouettes (tight and flared) and three lengths (mini, knee-length, and maxi). To apply the skirt design implemented through variables to the actual 3D human shape, the shape data of women in their 20s and 30s were randomly selected from the 5th human data of Size Korea. Skirt design silhouette modeling was performed by adjusting the variable values according to body type. Parametric design has the potential to help develop design ideas in the field of fashion design, considering the method and characteristics of parameters of the variety of variables and rapid modification. Furthermore, if systematic research on variables and options among fashion design elements is conducted, the possibility of converging them into customization or co-design fashion design processes could be confirmed.

• 디지털산업정보학회논문지
• /
• 제6권1호
• /
• pp.131-142
• /
• 2010

In this paper, we propose a web GPS based logistics vehicle control management system using MVC design patterns. The proposed system is designed by applying design patterns of object oriented modeling called mini-architecture to enhance reliability of software as well as promote stability of overall system design. In addition, we can get a position information by means of the GPS embedded in PDA and communicate between client and monitoring server using CDMA network so that the position of client can be identified directly by the map service. The system provides an moving object indexing technique which extends the existing TB-tree to manage and retrieve a transporting trajectory of logistics efficiently. Finally, with development of the logistics vehicle control service called WG-LOGICS system, we can verify the usefulness of our system which is able for monitoring a vehicle preparation, allocating registration, loading a burden, transfer path, and destination arrival in real world.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2017년도 추계학술대회
• /
• pp.47-48
• /
• 2017

This paper presents a low-cost portable lithium battery parameter measuring and estimating the solution. In this method, lithium battery characteristics are monitored during discharging and charging cycles. The battery profile is analyzed, and its key parameters are estimated by GNU Octave running on Raspberry Pi Zero, a mini computer. The proposed method can measure and estimate the battery parameters for SOC and DOD estimation with reasonable accuracy as well as portability features.

• Structural Engineering and Mechanics
• /
• 제21권5호
• /
• pp.495-506
• /
• 2005

A neural network based model is developed for the structural analysis of masonry infilled steel frames, which can account for the non-linearities in the material properties and structural behaviour. Using the data available from the analytical methods, an ANN model with input parameters consisting of dimension of frame, size of infill, properties of steel and infill was developed. It was found to be acceptable in predicting the failure modes of infilled frames and corresponding failure load subject to limitations in the training data and the predicted results are tested using the available experimental results. The study shows the importance of validating the ANN models in simulating structural behaviour especially when the data are limited. The ANN model was also compared with the available experimental results and was found to perform well.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1117-1120
• /
• 2002

In general, standard TCP/IP (transmission control protocol-internet protocol), which is called TCP/IP, is using as the communication basis protocol between any collections of networks that is connected. In this paper, using this TCP/IP implementation of remote system and suitable program for long distance communication is proposed. This system can make system, which basic Ethernet and TCP/IP used system, to mini modeling, so all module that is using here can be used. Therefore, intention of this paper is to reduce expenses, to effective manage for plant and to increase of productivity as linking each plant of several factories to TCP/IP and Ethernet, and then many control plant and manager minimize the needed course.

• Psychiatry investigation
• /
• 제15권12호
• /
• pp.1154-1161
• /
• 2018

Objective The present study aimed to investigate relationship among cognitive factors (working memory and processing speed) and fluid reasoning (Gf) in psychiatric patients using a standardized clinical tool. Methods We included the responses of 115 heterogeneous patients who were diagnosed with the MINI-Plus 5.0 and WAIS-IV/WMS-IV was administered. For our analysis, structured equation modeling (SEM) was conducted to evaluate which cognitive variables are closely related to the Gf. Results The results showed that the visual working memory was the strongest predictor of the Gf compared to other cognitive factors. Conclusion Processing speed was capable of predicting the Gf, when visual working memory was controlled. The inter-relationship among the Gf and other cognitive factors and its clinical implications were further discussed.

• 한국과학교육학회지
• /
• 제40권6호
• /
• pp.611-620
• /
• 2020

본 연구는 학생들의 모델링 과정에서 나타나는 창의성을 사회적 구성주의 관점에서 사회적 상호작용을 통해 학습자가 구성할 수 있는 인지적 능력으로 보고, 이것이 성인의 지도보다는 학습자끼리 서로 상호작용할 때 더 활성화 될 수 있음에 주목하였다(Vygotsky, 1978). 이에 따라 모델링 과정에서 나타나는 학생들의 창의성과 그것에 영향을 미치는 소그룹 상호작용의 특징에 대하여 질적 분석을 통한 본질적 사례연구를 수행하였다. 연구자는 실제 수업에 활용할 9차시의 모듈을 개발하였다. 연구 참여자는 한국의 4학년 초등학생 24명(남 12명, 여 12명)이다. 연구자는 수업자 및 관찰자로서 연구에 참여했으며, 수업 동영상 자료와 녹음 자료, 학생 면담 녹음 자료, 활동지 등의 자료를 수집하였다. 창의성의 수준은 'Mini-C' 창의성(Beghetto & Kaufman, 2007)을 기준으로 하였으며, 학생들의 창의성 분석을 위하여 Davis, Rimm & Siegle(2010)가 제시한 19가지 창의적 능력을 참고하였다. 연구 결과, 개인 모델링 과정에서 주로 나타난 학생들의 창의성은 정교화, 평가, 시각화, 성급한 결론의 유보, 독창성, 분석, 집중 등이었다. 또한 모델링 과정에서 학생들의 창의성에 영향을 주는 소그룹 상호작용은 '제안', '동의', '질문', '반박', '전환'의 5가지로 분류할 수 있었다. 각각의 상호작용을 통해 학생들은 모델링 과정에서 자신만의 생각과 아이디어를 표현하고, 수정하는 과정을 보여주었다. 특히 어린 학생들임에도 불구하고, 자신의 개인 모델을 무조건적으로 반영하기 보다는 다양한 창의적 능력의 사용과 합의를 통해 더 나은 그룹 모델을 형성하고자 하였다. 이러한 점은 앞으로 과학적 모델링 연구에서 학생들의 창의성에 더욱 주목해야 할 필요성을 보여준다.

• 대한환경공학회지
• /
• 제28권1호
• /
• pp.97-103
• /
• 2006

본 논문은 미세 오존 출력을 얻을 수 있는 자동제어형 오존발생장치의 제어기법을 제시하고, 또한 무성방전에 의한 오존발생장치의 유입공기를 공극에서 저온인 $2^{\circ}C$까지 냉각 하여 포화 확산도가 높은 고밀도 탈취용 오존을 발생시킬 수 있는 기법을 제시한다. 고주파수의 오존방전 노이즈에 의한 전원파형의 불량화를 보상하기 위해서 디지털 궤환 제어시스템을 구성하고, 방전관의 등가 커패시터의 전압과 전류를 검출하여 2중의 제어루프를 설계한다. 부하변동에 따르는 과도상태 응답특성을 개선하고 제어기의 연산 지연시간을 보상하기 위하여 연산시간을 전원장치 플랜트의 고유한 파라미터로 가정하여 플랜트모델에 포함시켜 모델링한다. 제안된 오존 발생기는 고농도 고효율의 오존방전 시스템의 입력전원에서 고주파방전노이즈가 제거되어 정현적으로 되며 2배 이상의 안정된 오존출력을 얻는 것을 실험적으로 입증한다.