• 제목/요약/키워드: Mine design

검색결과 148건 처리시간 0.022초

소나와 무인기뢰처리기 정보를 활용한 기뢰전 체계 설계 방안 (A System Design Method of Mine Warfare Using Information for SONAR and MDV)

  • 김준영;신창홍;김경희
    • 한국통신학회논문지
    • /
    • 제39C권12호
    • /
    • pp.1243-1249
    • /
    • 2014
  • 기뢰는 수중에 설치되어 수상함과 잠수함을 공격하기 위한 폭발물로서, 기뢰전은 해군의 여러 가지 성분작전 중에서 매우 중요한 작전 중 하나이다. 본 논문은 기뢰전 일반 개념에 대한 이해로부터 기뢰탐색작전 및 소해작전의 소개와 본문에서 소개 할 몇 가지 기능을 통한 전반적인 기뢰전 체계 설계 방안을 제안한다. 기뢰전 체계의 기능으로는 소나 영상정보로부터 아다부스트 기법을 활용하여 기뢰영역을 탐지하는 기능과 기뢰탐색작전 및 소해작전의 수행 시 각각의 진행률을 계산하는 기능, 소나로부터 수신한 기뢰 표적으로 무인기뢰처리기를 유도하는 기능 등이 있다.

3차원 모델링을 이용한 재개광 양양철광의 운반시스템 설계 (Mine Haulage System Design for Reopening of Yangyang Iron Mine using 3D Modelling)

  • 손영진;김재동
    • 터널과지하공간
    • /
    • 제22권6호
    • /
    • pp.412-428
    • /
    • 2012
  • 본 연구에서는 재개광을 계획하고 있는 (구)양양철광의 수갱광체를 연구대상으로 설정하고 이를 재개광하기 위한 운반시스템의 구축을 목적으로 광체 및 광체 주변의 지질구조와 구갱도 현황 및 신갱도 개설 계획을 3차원으로 모델링 하였다. 연구에 사용된 software는 GEMCOM사(社)의 GEMS로써 3차원의 매장량평가, 개발타당성 평가, 운영 관리용 프로그램이다. 2차원 지형도와 지표 지질도를 자료로 하여 지표 지형 및 지질을 3차원으로 모델링 하였으며 (구)양양철광 개발 당시 작성된 지질 단면도와 시추자료를 토대로 연구대상지역의 지질 구조 및 광체를 3차원적으로 생성하였다. 수갱광체는 충전된 채굴적, 공동, 잔광으로 구분하여 모델링하고 잔광부의 품위에 대한 시추 정보로부터 지구통계학적 기법을 적용하여 품위별 매장량 평가 결과를 얻을 수 있었다. 또한 기존 2차원 구갱도 개설 현황 자료를 이용하여 구갱도에 대한 3차원 모델링을 수행하였고, 무궤도 운반 시스템의 적용을 고려하여 신갱도의 크기와 배치를 3차원으로 설계하였다. 완성된 광체 및 운반 시스템의 3차원 모델을 이용하여 지하선광장의 위치를 선정하였다. 마지막으로 채취한 시료의 암석 물성값들을 기초로 광체 주위에 부존하는 물성을 암종별로 입력하고 지구통계학적 기법을 통해 미조사 부분에 대한 암석물성을 추정할 수 있는 3차원 공학적 모델링을 수행하였다. 이러한 과정을 통하여 얻어진 재개광 광산의 3차원 모델은 매장량 평가 및 개발계획 수립, 추가 탐사 지역의 선정이나 개발 계획의 변경 등의 문제들을 해결하고 체계적이고도 지속적인 광산 개발 기술 확립에 기여할 수 있을 것이다.

Design of Passive Treatment Systems for Mine Drainage Waters

  • Jeen, Sung-Wook
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제22권2호
    • /
    • pp.1-9
    • /
    • 2017
  • Passive treatment systems are commonly used for remediation of mine drainage waters because they do not require continuous chemical inputs and operation. In this study, the selection and design criteria for such systems were evaluated, particularly the two most commonly used ones, i.e., permeable reactive barriers (PRBs) and vertical flow biological reactors (VFBRs). PRBs and VFBRs are operated on the same principles in terms of biochemical reaction mechanisms, whereas differences relate to configuration, engineering, and water management. In this study, each of these systems were described with respect to key design variables, such as metal removal mechanisms and removal rates, effectiveness and longevity, general design and construction, flow capacity, and cost. The information provided from this study could be used as a design guideline when a passive treatment option is considered for potential remediation of a mine site.

An Interactive Planning and Scheduling Framework for Optimising Pits-to-Crushers Operations

  • Liu, Shi Qiang;Kozan, Erhan
    • Industrial Engineering and Management Systems
    • /
    • 제11권1호
    • /
    • pp.94-102
    • /
    • 2012
  • In this paper, an interactive planning and scheduling framework are proposed for optimising operations from pits to crushers in ore mining industry. Series of theoretical and practical operations research techniques are investigated to improve the overall efficiency of mining systems due to the facts that mining managers need to tackle optimisation problems within different horizons and with different levels of detail. Under this framework, mine design planning, mine production sequencing and mine transportation scheduling models are integrated and interacted within a whole optimisation system. The proposed integrated framework could be used by mining industry for reducing equipment costs, improving the production efficiency and maximising the net present value.

연약암반에서 암반의 특성을 고려한 광산갱도의 최적 설계 (Optimized Design of Mine Span Considering the Characteristics of Rockmass in Soft Ground)

  • 장명환;하태욱;정희선
    • 터널과지하공간
    • /
    • 제28권2호
    • /
    • pp.125-141
    • /
    • 2018
  • 장기적 광산 개발계획을 위하여 광산의 갱도설계는 장비계획, 운반계획, 운영계획 등의 기본이 되므로 매우 중요하다. ${\bigcirc}{\bigcirc}$광산은 생산성 향상에 중점을 둔 갱도설계가 이루어짐으로써 채광계획 변경이 매우 어렵고, 굴착갱도를 유지하기 위한 많은 노력이 필요하였다. 본 연구에서는 암반의 역학적 특성을 고려한 최적갱도를 설계하고 지보계획을 수립하고자 하였다. 이를 위하여 암반의 역학적 변수(팽윤압력, 변형계수, 지압계수)들에 대한 추정, 다양한 현장조사와 분석 등을 수행하였다. 그 결과 roof bolt 등을 활용하여 갱도유지를 하려면 갱도단면 축소 등을 고려할 필요가 있었으며, 현 갱도규격을 유지하기 위해서는 지보재와 지보방법에 대한 다양한 기능적 기술들이 필요할 것으로 분석되었다.

Post-pillars design for safe exploitation at Trepça hard rock mine (Kosovo) based on numerical modeling

  • Ibishi, Gzim;Genis, Melih;Yavuz, Mahmut
    • Geomechanics and Engineering
    • /
    • 제28권5호
    • /
    • pp.463-475
    • /
    • 2022
  • In the mine exploitation stage; one of the critical issues is the stability assessment of post-pillars. The instability of post-pillars leads to serious safety hazards in mining operations. The focus of this study is to assess the stability of post-pillars in the 130# stope in the central ore body at Trepça hard rock mine by employing both conventional (i.e., critical span curve) and numerical methods (i.e., FLAC3D). Moreover, a new numerical based index (i.e., Pillar Yield Ratio-PYR) was proposed. The aim of PYR index is to determine a border line between stable, potentially unstable, and failure state of post-pillars at a specific mine site. The critical value of pillar width to height ratio is 2.5 for deep production stopes (e.g., > 800 m). Results showed that pillar size, mining height and mining depth significantly have affected the post-pillar stability. The reliability of numerical based index (i.e., PYR) is verified based on empirical underground pillar stability graph developed by Lunder, 1994. The proposed pillar yield ratio index and pillar stability graph can be used as a design tool in new mining areas at Trepça hard rock mine and for other situations with similar geotechnical conditions.

광산개발 타당성 평가 및 생산에 있어서 3차원 모델링 적용 사례 (Application of 3-Dimensional Modeling in Mine Feasibility Study and Production)

  • 최용근;허승;박준영;김장하;이성암
    • 한국지구물리탐사학회:학술대회논문집
    • /
    • 한국지구물리탐사학회 2009년도 특별 심포지엄
    • /
    • pp.89-100
    • /
    • 2009
  • 3-dimensional modeling methods have been used in the every step of resource development; Exploration, reserve estimation, mine feasibility study, mine design and mine production. This report shows seven cases for which 3-dimensional modeling is used in resource development. Six projects deal with resource esimation, mine feasibility study and production. And another deals with mine rehabilitation. These cases show that 3-dimensional modeling method is beneficial to understand the real state of ore deposit and complex underground structures. Moreover, 3-dimensional modeling is the most efficient method for mine planning and management in the every step of resource development.

  • PDF

국내외 지하광산 갱도설계 현황에 대한 고찰 (Review on Design of Underground Mine Openings in Korea and Overseas)

  • 윤동호;송재준
    • 터널과지하공간
    • /
    • 제29권1호
    • /
    • pp.30-37
    • /
    • 2019
  • 해외의 일부 광업 선도국에서는 정량적인 설계지침을 제시하거나 별도의 광산 갱도 설계지침을 개발하여 배포함으로써 지하광산 운영 시 대규모 인적 물적 피해로 이어질 가능성이 높은 낙반 및 붕락 재해의 발생을 최소화하기 위해 노력하고 있다. 국내의 경우에는 광산안전기술기준 등 광산개발 관련 지침을 통해 근로자 사고 방지를 위한 안전수칙과 작업지침을 제공하고 있으나, 갱도설계에 대한 부분에서는 정성적이고 불명확한 시공 지침만을 제공하는 데에 그치고 있다. 최근 국내 환경규제 및 천부 자원 고갈로 인해 광산이 점차 심부화되고 있는 추세이며, 갱도의 안정성을 확보하기 위해 정량적인 설계 규격을 제공할 수 있는 전문적이고 체계적인 광산 갱도설계 지침에 대한 수요가 증가하고 있다. 이에 따라 본 원고에서는 국내외 광산 갱도설계 실태와 연구동향 및 현행 설계지침에 대한 현황 조사를 통해 국내 갱도 설계지침 개발을 위한 사전연구를 수행하였다.

국내 광산 기술을 적용한 카자흐스탄 광산 발파설계 제안 (Suggesting Blasting Design for Kazakhstan mine using Korea Mining Technology)

  • 진연호;민형동;정민수;박윤석;허의행
    • 화약ㆍ발파
    • /
    • 제32권1호
    • /
    • pp.10-17
    • /
    • 2014
  • 본 연구에서는 중앙아시아에 위치한 카자흐스탄을 방문하여 Kazakhmys광산을 소개하고 국내 발파 기술을 접목할 경우를 가정하여 최적의 발파 설계를 제안하고자 한다. 그 결과, 국내 발파 기술을 사용하더라도 카자흐스탄 광산에서 발생하는 화약 소모량과 천공수 등을 절감하여 최종적인 생산원가를 절감할 수 있는 발파 설계가 가능한 것을 알 수 있었다.

산업부산물(産業副産物)을 이용(利用)한 광산(鑛山) 스프레이 콘크리트의 물성연구(物性硏究) (A Study on the Specialized Mix Design of Mine Sprayed Concrete Using Industrial Byproducts)

  • 마상준
    • 자원리싸이클링
    • /
    • 제22권3호
    • /
    • pp.18-27
    • /
    • 2013
  • 본 연구에서는 광산 스프레이 콘크리트에 대한 연구개발의 일환으로 산업부산물을 구조재료인 시멘트에 혼입하여 산업부산물의 재활용 극대화 방안을 제시하였다. 또한 이를 통해 안정성과 경제성을 모두 만족할 수 있는 친환경적인 광산 스프레이 콘크리트의 배합비를 도출하고 평가하였다. 연구 결과 광물성 혼화재를 사용한 콘크리트 강도는 증가하였으며, 현장시험에서도 양호한 결과가 도출되었다. 그러므로 산업부산물을 이용한 광산 스프레이 콘크리트는 향후 현장적용이 가능할 것으로 판단되었다.